GYMCYEO Y03 4 Blades Mini Blender Juicing Blenders User Guide

June 14, 2024
GYMCYEO

GYMCYEO-LOGO

GYMCYEO Y03 4 Blades Mini Blender Juicing Blenders

GYMCYEO-Y03-4-Blades-Mini-Blender-Juicing-Blenders-
PRODUCT

Product Information

The product is a portable blender with a lid handle, blender base, power switch, charging port, and indicator light. It comes with a transparent cup body for blending food and drinks. The blender has a maximum watermark for ice and fruit and can operate at temperatures within a certain range. It is not suitable for use with sparkling water or hard foods.

Product Usage Instructions

  1. After loading the food or ingredients, tighten the upper lid and blender body.
  2. Make sure that the transparent cup body is aligned with the main body within the specified scope.
  3. Double-click the power switch to start the blender.

Warning:

  • Do not soak the base in water as it may cause device damage.
  • It is strictly forbidden to use the juicer while the upper lid is not tightened. Do not mix cores or hard foods.
  • Do not open the cup when the machine is running and do not touch the rotating parts at any time.
  • If the blender is stuck by food, turn off the blender, remove hard objects, tighten the blender, and then restart.
  • Do not exceed the maximum capacity of the cup.

Matters Needing Attention

  • Please read the instructions carefully before use and follow it to avoid accidents and product damage.
  • Stop using the product if the magnetic suction charging wire or plug is damaged or if the functions are invalid.
  • Keep the product out of reach of children and away from sharp edges or high-temperature surfaces.
  • Do not immerse the product in water or any other liquid.
  • Do not touch the electrical contact points of the magnetic charging base with wet hands and avoid pulling the charging base via its cable.
  • Do not use boiling water for cleaning.
  • Please check whether the juice cup is installed correctly before running the machine.

Charging Steps

To charge the blender:

  1. Open the charging port cover and connect the standard charging cable interface to start charging.
  2. The red light will be on during charging and will change to green when fully charged.
  3. The blender cannot be used during charging.

First Use

  • To ensure optimal battery life, it is recommended to fully charge the blender before initial use.
  • Use the dedicated charging cable provided.

Cleaning and Maintenance

  • Make sure the blade stops before cleaning.
  • Do not use steel cleaners, abrasive cleaners, or corrosive liquids (such as gasoline or acetone) to clean the product.
  • The blender base can be quickly washed with water, but do not soak it in water or other liquids. Dry it in time.
  • When storing, make sure the product is clean, dry, and placed in a dry and ventilated place away from direct sunlight.

Introduction

Instructions

  1. Cut the fruit into 1cm x 1cm x 1cm cubes.
  2. Place the diced fruits into the cup and add water, milk, or other beverages. The total volume of ingredients and liquid should not exceed Tips 2’s request.
  3. After loading the ingredients, screw on the lid tightly, ensuring that the” “of the transparent cup body is aligned within the scope of” “on the main part. then double-click the “power button” to start.
  4. During operation, the green light will remain solid. If the main part is not aligned properly, the green light will flash.
    • The red light will remain on when the battery is low, and it will flash when the load is heavy.
    • The red light indicates charging, while the green light indicates a full charge.
    • The blender cannot be used when charging.

Troubleshooting

NO Precautions Indicator Failure analysis Solution
  not working Greenlight: flash The blender base and bottle are not
tightened Make sure the on bottle is aligned with the“ ..”
2 Cannot boot Red light: on Low or out-of-battery Please charge in time
  Automatic stopped within 10 during use / trip Heavily loading ped the
protect Take out some fruits and ice cubes,
  get stuck k uring wor Red light: flash i fruit particles and ice cubes are
too big Cut the fruit into small pieces
  Leak / The silicone ring is not installed properly Reinstall the

silicone ring
6| Scorched| /| Continuous use for a long time| Restart after the machine cooling down for 30 minutes

Tips 1

After loading the food, tighten the upper lid and blender body, and make sure that the“ ”of the transparent cup body is aligned with the main body, within the scope “ ” .Double-click

Tips 2

  • Max Water Mark for ICE –300ml
  • Max Water Mark for Fruit –400ml
  • Water or other liquid can not exceed 60 degrees. Can not add sparkling water.

Charging steps

Open the charging port cover and connect to the Standard charging cable interface to start charging.
The red light is always on during charging and changes to the green light when fully charged. The blender cannot be used during charging.

First use

Before first use, please ensure that the battery is fully charged and clean the juice cup and the blades, thoroughly dry them. When cleaning, you can rinse it with clean water, but do not immerse it in water for cleaning This product has dual safety protection, if the main machine is placed separately or not properly aligned with the transparent cup, the product will not work. In such cases, the indicator light will flash green. Only when the main machine is securely installed onto the juice cup, rotate it into right position, and double-click the “power switch” can you start the operation. The light will remain solid green when in the working status

Tips:

  1. To meet transportation requirements, the juice cup is shipped with only 40% battery capacity. We recommend fully charging before initial use to ensure optimal battery life.
  2.  Please use the dedicated charging cable.

Cleaning and maintenance

Make sure the blade stops before cleaning;
Do not use steel cleaners, abrasive cleaners, or corrosive liquids (such as gasoline, or acetone) to clean this product;
The blender base can be quickly washed with water, but do not soak it in water or other liquids, please dry it in time;
When storing, please make sure the product is clean, dry, and placed in a dry and ventilated place away from direct sunlight.

Warning 1

Do not soak the base in water, it may cause device damage.

Food hygiene information and declaration of conformity

Part name| material| Executive standard|
---|---|---|---
blade|   stainless steel| GB———| /
Cutter shaft|   stainless steel| GB———| /
cup base| ABS| GB———

GB———

| /
cup body| PCTG| GB———

GB———

| /
Seal ring| rubber| GB———–| /

Warranty

Warranty Regulations

  • The warranty period is one year. If the product breaks due to quality problems during the warranty period, you can enjoy free service with a valid purchase certificate.
  • In the following cases, you can’t use the free service.
  • Damage caused by improper use;
  • Damage caused by other maintenance staff;
  • No valid proof of purchase or valid proof of alteration;
  • Damage caused by unstable voltage or exceeding the specified range;
  • Damage caused by failure to follow the instructions for use;
  • Products beyond the warranty period or warranty;
  • Products that have been disassembled or repaired by a company other than our authorized outlets

Warning 2

It is strictly forbidden to use the juicer while the upper lid is not tightened. Do not mix the cores or hard foods.GYMCYEO-Y03-4-Blades-Mini-
Blender-Juicing-Blenders-FIG-4

Information on the content of hazardous substances sold in China

This form has been prepared in accordance with SJ / T 11364.

  • Indicates that the content of this hazardous substance in all homogeneous materials of this part is below the limit requirement specified in GB / T 26572.
  • : Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the component exceeds the limit requirement specified by GB / T 26572, and there is no mature alternative solution in the industry at present. This product complies with the environmental protection requirements of the EU RoHS Directive.

This mark indicates that the environmental protection business period of the product and its components is 10 years. When some parts and components have different environmental protection business periods, they will be marked separately (for example, battery cell modules will have another mark attached to their products). This Environmentally Friendly Use Period applies only to operation under the conditions specified in the product manual. This document concerns electrical and electronic products imported or sold within the territory of the People’s Republic of China.

Safety Waring

Please read the instruciton carefully before using the product and follow the struction. Against the instruction or operating improperly may cause serious accidents.

Be careful! Illegal operations may damage your goods and even your personal safety.
Do not open the cup when the machine is running. Do not touch the rotating parts at any time. If a blender is stuck by food, please turn off the blender and remove the hard objects. tighten the blender and then restart. Do not exceed the maximum capacity of the cup.

Specifications

  • Product Name: Fruit Blender
  • Product model: Y03
  • Bottle capacity: 500ml
  • Battery voltage: 7.4V 1200mAh
  • Charging voltage: 5V 1.5A
  • Rated power: 60W
  • Product weight: 741g
  • Unit size: D92mm*223mm
  • Made in China

Protect environment

Please follow Local regulations and dispose of waste electrical products and equipment in suitable waste recycling bins.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals