Lepro LE 3300002 LED Camping Lantern User Guide

Lepro LE 3300002 LED Camping Lantern

Product Information

The LED Camping Lantern by Lepro I LE is a portable lighting device designed for camping and outdoor activities. It measures 540*140mm and has a power output of 10W, providing a maximum brightness of 1000 lumens. The lantern operates at a voltage of 4.5V.

The lantern offers multiple lighting modes, including Daylight White, Warm White, Combined, and Flash. The discharging time varies depending on the selected mode: Daylight White lasts for 18 hours, Warm White for 25 hours, and Combined for 12 hours.

The lantern requires three 1.5V batteries of size D (not included) to function properly.

Product Usage Instructions

Before using the LED Camping Lantern, please read the following instructions carefully:

1. Inspect the lamp carefully before usage to ensure it is in good condition.
2. Use the battery type as indicated in the specifications and make sure the batteries are properly inserted.
3. Do not submerge the lantern in water as it is not waterproof.
4. Do not attempt to modify or retrofit the lantern within the warranty period.
5. Note that the lantern does not have a memory function and will not remember the previously selected lighting mode.
6. If the light source needs replacement, it should be done by the manufacturer, authorized service agent, or a qualified person.

Routine Maintenance

To ensure optimal performance and longevity of the lantern, follow these routine maintenance guidelines:

1. If the lantern will not be used for an extended period, remove the batteries to prevent leakage that may damage the device.
2. Avoid using chemical solvents during routine maintenance to prevent damage to the lantern.
3. Clean the lantern regularly to ensure better lighting.

Note: If you encounter any issues with the product, please contact Lepro I LE or a certified Lepro I LE retailer for assistance. If the product was purchased from another source, reach out to the respective retailer for customer support.

LED Camping Lantern User Guide
Thank you for choosing Lepro I LE. Please read this user guide carefully before usage and keep it for future reference.

Precautions

1. Please inspect the lamp carefully before usage.
2. Use the battery type as indicated in the specifications, and make sure the batteries are properly inserted before usage.
3. This product is not submergible.
4. Do not retrofit the lantern within the warranty period.
5. The lantern has no memory function.
6. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similarly qualified person.

Specifications

10 W / 1000 lm / 4.5 V=-=2 A / 3000K-6000K / IPX4 / -25 °C ~ 40 °C / -13 °F ~ 104 °F

• Lighting Modes: Daylight White, Warm White, Combined, Flash
• Discharging time: Daylight White 18 hours, Warm White 25 hours, Combined 12 hours.
• Required Batteries: Three 1.5V Batteries size D (not included)

Routine Maintenance

1. Remove the batteries from the lamp if it has not been used for a long time, in case the batteries leakage damages the lamp when they run off the power.
2. To avoid any damage to the lantern, please do not use any chemical solvents during routine maintenance.
3. Clean the lantern regularly to ensure better lighting.

Note
We provide service for products bought from Lepro I LE or certified Lepro I LE retailers. If you purchased this product elsewhere, please contact the retailer for customer support.

Warning
Do not use rechargeable D-size batteries for the lantern.

DIMENSION

1. Handle
2. Diffuser
3. Switch button
4. Hook
5. Tragegriff
6. Diffuser
7. Schalter
8. Haken

LR20 / AM1 1.5 V
D-sized batteries (not included)

Do NOT use rechargeable batteries.

• Daylight White
• Warm White
• Combined
• Flash

Long Press to adjust brightness.

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products identified with this symbol may not be discarded with normal household waste but must be taken to a collection point for recycling electric and electronic appliances. This recycling symbol marks e.g. an object or parts of the material as valuable for recycling. Recycling helps to reduce the consumption of raw materials and protect the environment.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference that may cause undesired operation.

References

• Lepro - AI Generated Lighting, Smart LED Bulbs, AI Smart Lights, LED Lighting Fixtures, Smart LED Strip Lights, LED High Bay Lights
• Lepro® - Lighting EVER - Indoor/Outdoor LED Bulbs, LED Lights, Light Fittings, LED Lamps, LED Light Fixtures
• Lepro - AI Generated Lighting, LED AI Smart Lighting, LED Lights, Smart LED Bulbs, Smart LED Strip Lights, High Bay LED Lights, LED Shop Lights
• LED Lampen, LED Beleuchtung, Außenbeleuchtung - LE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>