XElectron T4 WiFi S2 720p Native Resolution Full HD 1080p Support Projector User Guide

XElectron T4 WiFi S2 720p Native Resolution Full HD 1080p Support Projector

PACKING LIST

Mini Projector

Remote Controller (Not Standard Accessory)

Electric Cable

AV Cable

User’s Guider

Introduction

PARTS AND FUNCTIONS OF PROJECTOR

PARTS AND FUNCTIONS OF PROJECTOR

Introduction Of Keyboard

**Composite keys***

1. Press the button for two seconds to use the menu function.
2. Press the button to use the down function.

Remote control

Do not mix use old and new batteries. If remote is not used for long time, batteries should be removed.
Remote should target at the IR receiver or the reflection side.

Operation Description

Power ,on/off

1. Buttons Control Press power button as pie show sun till projector is on or off.

2. Remote Control Press power button as pie 2 to switch on/off the projector.

3. Buttons Control

4. Remote Control

Projector installation

Operation Description

Focus

Put the projector with the lens vertical to the wall or screen, turn on the projector and then adjust the focus handling as pie until the picture is clear.

Keystone distortion

When keystone distortion occurs. It is recommended to adjust the keystone correction ring.

Operation Description

Projector settings

Properly set up the projector for better film experience. Main parameters of projection can be set up through the following steps.

1. Open the video page and press “MENU” on the projector panel or remote control to the interface as shown below.
   

2. Press” “on the projector panel or remote control, choose between different options and press “OK” to sub menu and properly set up the mode.

Equipment connection

input illustration

Multimedia (USB) Input

Insert USB into relevant position, then change the input source to USB.
Select the relevant icon and enter into the submenu. Movies for video files/Photos for picture files/Music for audio files/Text for tx files And press “OK” to display.

AV or HDMI Input

Press” ” on the projector or” ” on the remote to change to relevant input.

input illustration

Support Formats

File type               Format                         Suffix Decode

Audio| Mp3| mp3|
M4A| mp4| ****
Pie| JPEG| .jpg|
BMP| .bmp|
PNG| .png|
Video| MPEG l| .DAT\ .M PG\ .MPEG| \
MPEG2| .M PG| \
MPEG 4| .AY I\ .MP4| DIYX,XYID
RM\RMYB| .RM\.RMYB| RY8, RY9, RY l 0
H264| .MKY\.MOY| H.264
MJPEG| . AYI| \
DivX| .DIVX\.AVI| MPEG,DIVX,H264
FLY| .FLY| H264

Projection distance and size

This table measures the front end and the center of the lens and assumes that the projector is horizontally placed.

input source switch

1. Enter the” Home” interface, select the “Source” icon through the remote control or the keyboard button, and press “OK” to enter” Source menu”.
   

2. In the pop-up “Source” menu, select the type of signal source channel (video, HDMI, multimedia) that you want to play.
   

Network Set

1. Enter the “Horne” interface, select the “Network Set” icon through the remote control or the keyboard button, and press “OK” to enter” WLAN Set menu”.
   

2.  In the pop-up “WLAN Set” menu , select the network you want to connect to.
   

3. Enter the WIFI password to connect to the network.
   

Multimedia function

1. Insert the USB device containing the video/picture/music/e-book file into the projector USB port (a recognized USB device icon will appear on the home page).
   Enter the interface of ” Home “, select the “USB” menu through the remote control or the keyboard button, press “OK” to enter the “USB menu”.
   

2. In the pop-up “USB” menu, select the type of multimedia file (video/ picture/ music/ebook) to be played through the remote control or the button on the keyboard button, press “OK” to enter the file menu in the USB device and select the multimedia file to be played.
   

Miracast

1. Enter the “Home” interface, select the” Miracast” icon through the remote control or the keyboard button, and press “OK” to enter” Miracast menu”.
   

2. Open the Android device, go to “Device connectivity” under the setting, click “Wireless Projection”, and search the network name of the projection device “KeTing-1627” (as below pie showns), then select the projector name to realize wireless connection function.
   

Airplay

1. Enter the” Home” interface, select the “Airplay” icon through the remote control or the keyboard button, and press “OK” to enter” Airplay menu”.

2. Airplay
   Method 1: Connect your phone and projector to the same WIFI. Open the “Screen mirroring” function of iOS device, at this time, the iOS device will pop up the name of projection device, click the name to realize the wireless co- screen of iOS device and projection device.
   

Method 2:0pen the iOS device, go to “WLAN” of setting to search for the name of the projector device to be connected, then open the ” mirror” function of the iOS device. Then it will pop up the name of the projector device. Then select the projector name to put password to be connected successfully(As below pie shows) to realize the wireless connection function.

DLNA

1. Enter the “Home” interface, select the “DLNA” icon through the remote control or the keyboard button, and press “OK” to enter” DLNA menu”.
   

2. DLNA
   Step 1: Connect your phone and projector to the same WIFI connection.
   Step 2: Find “ “in the APP content that needs the same screen.
   Step 3: Click “ ” to select” Hl2611DL NA-1627 “to complete the same screen.
   

Projection Set

1. Enter the “Set” interface, select the ” Projection Set” icon through the remote control or the keyboard button, and press “OK” to enter” Projection Set menu”.
   

2. In the pop-up menu of “Projection Set”, you can choose forward/back/formal/ ceiling projection.
   

3. 1. Enter the “Set” interface, select the “Picture Set” icon through the remote-control or the keyboard button, and press “OK” to enter” Picture Set menu”.
      

4. In the pop-up menu of ” Picture Set “, you can set “image” related options.
   

Sound Set

1. Enter the “Set” interface, select the ” Sound Set” icon through the remote control or the keyboard button, and press “OK” to enter” Sound Set menu”.
   

System Set

1. In the pop-up menu of “Sound Set “, you can set “Sound” related options.
   

2. Enter the “Set” interface, select the “System Set” icon through the remote control or the keyboard button, and press “OK” to enter” System Set menu”.
   

3. In the pop-up menu of “System Set “, you can set “System” related options.
   

TimeSet

1. Enter the “Set” interface, select the “Time Set” icon through the remote control or the keyboard button, and press “OK” to enter”Time Set menu”.
   

2.  In the pop-up menu of “Time Set”, you can set “Time” related options.
   

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>