ChunHee CK01 Wireless Customer Calling System User Manual

: June 14, 2024
: ChunHee

Table of Contents

CK01 Wireless Customer Calling System
Features
Intruduce
Overview
Specification
Basic Operation
Main Functions
Customer Guarantee
Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CK01 Wireless Customer Calling System

ChunHee CK01 Wireless Customer Calling System CKO01-Wireless Queue Calling System
User’s Manual

Features

3 Digital Display
Stable Signal
3 Broadcast Option
Large and Clear Voice
8 Adjustable Volume Level
Support Connect External Audio
Various Place Methods

Intruduce

How Queue Management System work?

Customer goes to the Service station and takes a number;
Customer wait for their service;
When it is the turn, the counter worker will press the number on the keyboard to call the customer;
The customer’s number will show on the display screen with a prompt sound so that the customer knows it is time for the service counter.

Read this manual thoroughly. A clear understanding of the manual will make installation and operation much easier.

Overview

ChunHee CK01 Wireless Customer Calling System -
overview

Specification

Receiver (Screen) Specification

Basic Operation

ChunHee CK01 Wireless Customer Calling System - basic
operation

Keys Intruduction:
Screen.
POWER: Connect Power.
FUN: Enter setting status or Exit setting status.
SETNOL+: Select number/Increase volume.
MOVENOL-: Shift the number to change the number place/Decrease volume.
ENT: Enter setting status and Confirm the setting.
Keypad:
0-9: Number list
-: Decrease Number
+: Increase Number
Bell: Calling Number

Main Functions

F-1 Storage
Connect the keypad with display
While plugging in the power supply, you will see a ID CODE on the keypad screen, please remeber it.
Then pair the keypad with the display as follows:

Hold [FUN] on the display for 3 seconds till the screen display [F-1];
Press [ENT], 3 numbers appear on the screen;
Press [ENT] again, the number on the display will flash;
Press any number on the keypad, then press [Call] on the keypad, then you will see the ID CODE of the keypad display on the display screen, that means they are connect successfully;
Press [FUN] twice for back to standby status.

If you wanna add more keypad or display to the system, just need repeat the steps to add the keypad to the other screen.
F-3 Screen Display Mode
Set the time of the number displayed on the receiver screen (Default set: 30 seconds)
1. Hold [FUN] on the display for 3 seconds till the screen display [F-1];
2. Press [SET] or [MOVE] to F-3;
3. Press [ENT], the screen show [000], press [SET] to increase the number from 000 to 255 or press [MOVE] to decrease the number from 255 to 000;
  Tips: If you set [000], the number will display on the screen all the time!
4. Press [ENT] to confirm the number you set.
5. Press [FUN] twice back to standby mode.

F-4 Alert Mode Setting
This display could be used many kinds of service area. The sound alert
could be changed according to your need. There are 3 kinds of alerts for
your choice:
0. Dingdong
1. XXX Number Number
2. Dingdong+Number XXX

Hold [FUN] for 3 seconds till the screen show [F-1];
Press [SET] or [MOVE] to F-4 (the screen will show [F-4]);
Press [ENT], the screen will show [0].
1. Press [SET] once, the screen display the number [0], it is means [Ding-Dong Promot Mode];
Press [SET] twice, the screen display the number [1], it is means [Number XXX Promot Mode];
Press [SET] third time, the screen display the number [2], it is means [Ding-Dong Number XXX Promot Mode];
Press [ENT] to confirm the mode you set,
Press [FUN] twice back to standby mode.

F-5 Volume Setting
There are 8 volume levels option. Level 1 is the lowest level, Level 8 is the loudest level.

Hold [FUN] for 3 seconds till the screen show [F-1];
Press or [MOVE] to F-5 (the screen will show [F-5]);
Press [ENT], the screen will show a number between 0 to 8;
Press [VOL+] to increase volume level
Press [VOL-] to decrease volume level;
Press [ENT] to confirm the volume level you choose;
Press [FUN] twice to back to standby mode.

F-7 Restore Setting

Hold [FUN] for 3 seconds till the screen show [F-1);
Press [SET] or [MOVE] to F-7 (the screen will show [F-7});
Press [ENT], the screen will show [-0-];
Press [ENT] to confirm the restore setting;
Press [FUN] twice back to standby mode.

Customer Guarantee

We provide a 30-day money-back guarantee for any reason (free shipping) and 1-year warranty (transportation prepaid) to the original purchaser against manufacturing defects in materials and workmanship.
Note: This Warranty is void if the damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or any other reason.