EASYLONGER GP50 Portable Power Station User Manual

ES960

GP50 Portable Power Station

OUTDOOR BATTERY PACK
USER ‘S MANUAL

– Easy Charge,Longer Power –
For more information visit our support page at Lifetime Customer Support:
www.easylonger.com
support@easylonger.com

Thank you for choosing EASYLONGER! We kindly ask you to carefully read the manual before using it.

Product Specifications

Name：EASYLONGER Outdoor Battery Pack (ES960/GP50)
Capacity：297.6Wh / 24Ah @12.4V/96000mAh @3.1V
INPUT:
DC input：18-24V/4A(Max)
USB C input：DC5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A
OUTPUT:
Cigar Lighter Socket output：12V / 15A(Max)
USB 1&2 Output：5V/3A, 9V/2A,12V/1.5A
USB C Output：DC5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A
DC Output：12V/5A, 16.5V/4A, 20V/3.5A, 24V/3.5A
Wireless：10W
Measure：225.816576mm
N.W：3000g

Package Contents

1x ES960 LifePO4 Battery Pack
1x AC Charger
1x User Manual
1x USB C to USB C Cable
1x Handy bag
1x DC Cable for ResMed Airsense9 (S9)
1x DC Cable for ResMed Airsense10 (S10)/Aircurve 10
1x DC Cable for ResMed AirMini/ Airsense 11
1x DC Cable for Philips Dreamstation

Product Diagram

How to recharge the battery pack

※ Use either the DC or USB C input port. However, please note that both ports cannot be used simultaneously for recharging.
The Power Station can be charged in three ways:

1. Use the included 72W AC wall charger. It takes around 5.5 hours for a full charge.
2. Use a 60W or higher USB-C charger (sold separately). Expecting a 6-hour charge time.
3. Use an 80W or higher solar panel (sold separately). Charging time varies based on sunlight intensity and panel efficiency.

※ Note: Before using your new EASYLONGER ES960, it is recommended to charge it fully by plugging it into a suitable power outlet.

LED Display

Click the power button to turn on the wireless charging function. The digital display screen shows the battery pack battery level:
One bar = 0-25% battery power.
Two bars = 25-50% battery power.
Three bars = 50-75% battery power.
Four bars = 75-100% battery power (as shown in the picture).
※ When recharging the battery pack:
The LED screen displays ”IN” and the bar corresponding to the battery level blinks, and when the battery is fully recharged, the 4 bars will keep lighting; ※ When charging the device:
The LED screen displays “OUT” and the bars will disappear one by one as the power level drops.

How to Charge Your CPAP Machine

Factors Affecting CPAP Charging Time
The charging time of your CPAP device can vary due to several factors. These factors include settings such as pressure, humidifier, and heater. Even within the same CPAP brand,charging time can differ depending on whether the pressure is fixed or adjustable.If your CPAP has a self-titrating feature, the charging time may increase as the  pressure goes higher. Additionally, wearing a mask while using the CPAP will draw more current compared to when the mask is not worn. Furthermore, using a full face mask will consume more current than using a nasal mask.
Considering these various factors, it’s important to note that the current draw can be affected,resulting in different charging times for your CPAP device.
Two Ways to Connect Your CPAP Device
Option 1：Charging from the Cigar Lighter Socket:
To charge your CPAP device from cigar lighter socket, you will need a Cigar Lighter Socket to CPAP Adapter (sold separately). One end of the adapter connects to the battery pack’s cigar lighter output and the other end to the CPAP input port.
Connect CPAP from Cigarette Lighter Sockets Option 2：Charging from the DC Output Port
You can charge your CPAP device from the DC output port using one of the four DC cables that come with the battery pack. The compatible models for these cables are ResMed AirSense S9, AirSense S10/Aircurve 10, AirMini, and Philips Dreamstation. If your device is not one of these models, please purchase a separate charging cable.
Steps to Connect Your CPAP Device:

1. Long press the voltage set button until the display starts to flash.
2. Press the button shortly to cycle between voltage options: 12V, 16.5V, 20V, 24V.
3. Set the correct voltage on the power bank.
4. Connect the power bank to your CPAP device, and the charging will start automatically.

Connect CPAP from DC port

Note:
※ Remember to set the voltage again when using the device next time.
Emergency Warning Light、LED Light
※ To find the correct voltages for your device, refer to the label on the AC charger for your CPAP or consult your device’s user guide.

Charge Your Other Devices

1. Both the QC3.0 USB1 and USB2 ports are compatible with a wide range of devices, including mobile phones, tablets, cameras, and other digital devices.
2. The USB C port is designed to work with most USB-C enabled laptops and devices(up to PD 60W).
   ※ The Power Station will automatically charge your device. If you encounter any issues with device charging, please ensure that the cable and port are properly connected, and try pressing the power button.

How to set the DC output voltage

1. Before charging your DC enabled devices, it is important to select the correct voltage and connector.
2. To set the voltage, simply long press the voltage set button for 3 seconds.

The selectable voltage values (12V, 16.5V, 20V, 24V) on the LED display will flash and stay on each voltage for 5 seconds. Short press the voltage set button to cycle through the selectable values until you find the right one for your devices. Once the voltage value on the LED display stops flashing, the DC port can output the selected voltage.
※ Resetting the voltage
1. Press and hold the voltage button for 3 seconds to turn the output voltage off.
2. Press and hold again for 3 seconds until the display flashes. The voltage can now be adjusted.When the DC voltage is turned on and no device is connected, the display screen should be turned off after 2 hours, Once the DC voltage is turned off, the display screen will automatically shut down after about 1 minute.

12V Devices Charging

1. 12V devices supported: Car refrigerator/inflator pump , UAV battery/outdoor tentlight/camplight/fishing light/hunting light/fan and other devices under 150W.
2. Plug the devices into 12V cigar lighter socket .
3. The socket will automatically power the connected device
4. To Turn off the devices & unplug it from the battery pack .

Wireless Charging

Simply press the power button and instantly activate the wireless function, allowing for convenient charging with a maximum power output of 10W.
Emergency Warning Light、LED Light
Caution light: Press and hold the power button to activate the orange warning light. Press and hold again to deactivate it.
LED light: Double-click the power button to activate the white LED light. Repeat the double-click to turn off the LED light.

Usage Notes

1. The DC inport and USB C input port cannot be used simultaneously.
2. Pass-Through charging is supported: you can use the DC input and DC output at the same time.
3. Both USB1 and USB2 outputs support QC3.0 18W fast charging.
4. When finished using the DC port, press and hold the voltage button for 3 seconds to turn off the voltage display and then Power Station will automatically turn off. Otherwise, it will take 2 hours to turn off the display screen.
5. If you are using a power inverter with this unit, make sure it does not exceed a maximum of 150W.
6. To extend the battery’s lifespan, please unplug the charging cable after it is fully charged when using the AC adapter or a USB C charger.
7. Do not store the battery pack in extreme heat or coldness, near anything flammable or explosive, and keep it away from damp areas.
8. Run a full charge/discharge cycle at least once every four months to avoid shortening the internal battery’s lifespan.
9. If you are likely to store the battery pack for an extended period between uses, we recommend storing it at approximately 50% charge.
10.  Although the 12V socket supports pass-through charging, avoid charging and discharging the battery pack simultaneously, as this may reduce its lifespan.
11. Please note that the cigarette lighter output voltage range is 12V-14V.
12. When supplying power to different devices, an additional 10%-20% is lost due to the device being charged and the charging cable used. Always use the original cable supplied with the device being charged for optimal results.
13. Using your battery pack in temperatures below 0°C or above 60°C is highly discouraged and may likely cause irreparable damage to the internal battery.

FAQ

Q1. Is it possible to charge four devices simultaneously?

A1. Yes, you can charge four devices at the same time, but make sure the total power does not exceed 300W. It is recommended to avoid using high-power consuming devices on the USB C or DC port while the 12V cigarette lighter port is operating at full load.

Q2. What should be done if the battery pack fails to recharge?

A2. Please check if the charging adapter is correctly connected and if the 100v-240v AC charging option is enabled.

Q3. What should be done if the battery pack is unable to charge other devices?

A3. Please ensure that the charging cable is inserted into the correct port, and check if the output of this battery pack is compatible with the voltage requirements of your devices. Refer to your device's manual, product label, or adapter label for guidance.

CUSTOMER SUPPORT

If you experience any problems with your ES960, we are here to help you resolve them quickly .
To expedite the process, please follow the template below when reaching out to us:Order number + description of the issue +attach pictures/videos if necessary.
However,if you find that your EASYLONGER device is exhibiting abnormal behavi or,we recommend that you immediately cease using the product and contact us for support at support@easylonger.com.

Warranty

12-month warranty, plus an extra 12 months upon product registration on www.easylonger.com
Note: This warranty is void if the defect is caused by
— Damage caused by force majeure.
— Accidental damage,misuse,abuse,neglect.
— Improper repair or alteration by unauthorized persons.
— Expired warranty period.

| Instagram: https://www.instagram.com/easylonger_Global
---|---
| Facebook: https://www.facebook.com/easylonger
| TikTok: https://www.tiktok.com/@easylonger
| Pinterest: https://www.pinterest.com/easylonger
| Twitter: https://twitter.com/easylonger/

https://qrco.de/bd6dEQ MADE IN CHINA

Documents / Resources

| EASYLONGER GP50 Portable Power Station [pdf] User Manual
ES960, GP50, GP50 Portable Power Station, Portable Power Station, Power Station
---|---

References

• EASYLONGER | Easy Charge, Longer Power!
• TikTok - Make Your Day
• EASYLONGER (@easylonger_global) • Instagram photos and videos

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>