KIFACI CLS-01 12 Inch Rechargeable Motion Sensor Under Cabinet User Manual

100mm
70mm
MANUAL

Please read the manual before use.
[Caution]Please fully charge the battery before using it or thefirs time.

Product list

• Light x 2
• USB Charging Cable x 2
• Iron Sheet x 4

Function description

(Note: monochrome models do not have this function!)
♦ Holding button: When the light is on, the brightness can be adjust by holding the button, and release to lock the brightness. (The brightness can be memorized)
| ♦ Initially closed.
♦ Press the button for the first time to enter the ON mode. (In the ON mode, the sensing function won’t work and the light stays on)
♦ Press the button for the second time to enter the Night sensing mode. (The night sensing mode will be entered after the light flashes three times)
♦  Press the button for the third time to enter the All day sensing mode. (The all day sensing mode will be entered after the light flashes two times)
♦  Press the button for the fourth time to back to off.

(Special instructions for sensing mode]

1. Setting the night sensing mode, the light will only turn on when both sensing human and in low lit enviroment, otherwise it won’t turn on.
2. Setting the all day sensing mode, the light will turn on when sensing human not matter there is enough light or not.
3. The light will automatically turn off when human left the sensing range for after 25 seconds.
4. The light stays on if human keeps in the sensing range.

Notes for sensing mode

1. The installation position such as too low, too high or the probe was blocked will affect the sensing range, it is recommended to be mounted facing the side passing by to ensure the better effect.
2. The sensing mode can be blocked by glass.

Power usage duration description

1. According to different usage, the power usage duration would be different, The longer you use it every day, the faster the power consumption, if the power consumption is still fast using the sensingmode less than 8 times a day and less than 25 seconds every sensing time, please contact the seller.
2. The brightness will decrease with the decrease of power, when the birghtness is low, please recharge the light in time.

Sensing range description

• The sensing range of the lamp is the area within 120 ° and 3 meters with the probe as the center point, However, improper installation or blocking the sensing probe will affect the sensing sensitivity.

Installation description

1. Please clean the installation position and keep it dry.

2. Place the iron sheet on the back of the light finding out the position of the built-in magnet.
   (Don’ t stick the iron sheet on the light)

3. Stick it to the target position.

4. After installation, the light is magnetically attach on the iron sheet and can be take off at any time.

Installation precautions :

1. The iron sheet has two sides, one is metal and the other is adhesive.
2. The right installation method is to stick the adhesive side to the wall / cabinet , then the light can magnetically attach to the metal side. (Do not stick the adhesive side on the light!)
3. The iron sheet has the same amount as the magnet of the light, The iron amount of different light size may be different.

Charging description

♦ Hi Charging voltage: DC5V HB
♦  Red light– charging Green light — fully charged
Charging precautions:

1. Do not use a charging device with output voltage greater than 5v to charge the light!
2. In order to ensure charging safety and efficiency, please use the mobile phone charging adapter with safety certification to charge the light!
3. Do not use when charging. (The sensing mode can’ t work normally which effected by the charging light when charging )

Cautions

1. Please fully charge the battery before using it for the first time, otherwise the light may notbe use because of the circuit protection. (The protection is automatically released after charging)
2. not use the light under high temperature and humidity; This product is not suitable for outdoor.
3. The light source and battery of the product are irreplaceable. After a long time of use, when the brightness of the product is very low under full power state or the power usage duration becomes shorter under normal usage, the whole lamp shall be replaced.

FAQs

” image-1=”” headline-2=”p” question-2=”Q: The sensor is not sensitive enough / only worked when you walk closer? How wide is the sensing range ?” answer-2=”A:The sensing range of the lamp is the area within 120 * and 3 meters with the probe as the center point, However, improper instatlation or blocking of the sensing probe will affect the sensing effect. As shown in Page one [| Notes for sensing mode ” image-2=”” headline-3=”p” question-3=”Q: Power usage duration problem ?” answer-3=”A: According to different usage, the power usage duration would be different, The longer you use it every day, the faster the power consumption, if the power consumption is still fast using the sensing mode less than 8 times a day and less than 25 seconds every sensing time, please contact the seller.” image-3=”” headline-4=”p” question-4=”Q: Charging problem ?” answer-4=”A:Please read the [ Charge description J.” image-4=”” count=”5″ html=”true” css_class=””]

Please contact the seller if the manual can not solve your problem, Thank you for your choice and trust.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>