Eamoment B0C14DTGFK Programmable Slow Cooker Instruction Manual
- June 14, 2024
- Eamoment
Table of Contents
Eamoment B0C14DTGFK Programmable Slow Cooker Instruction Manual
OVERVIEW OF FUNCTIONS
Figure 1 : Full display of panel and digital tube
- With “HIGH, LOW, SAUTE, STEAM, WHITE RICE, WARM, DELAY” Functions.
- It has self-test, power-down memory and fault protection functions
FUNCTION KEY OPERATION
- After powering on, the buzzer sounds once, the digital tube and all LED indicators light up for 1 second,and then enters the activation state.
- Activation state: All LED indicators are off, and the digital tube displays “- – – -“. If there is no key operation within 15 seconds of activation, it will enter standby mode.
- Standby state: All LED indicators and digital tubes are off. Touch any button or turn the knobin the standby state to enter the active state;
- Unless otherwise specified, the buzzer will sound once for all valid keys (0.2 seconds by default). After all cooking functions are completed, the buzzer will sound 3 times.
STEPLESS KNOB (FUNCTION SELECTION AND TIME SETTING)
-
Function selection：
When activated, rotate clockwise or counterclockwise Stepless knob, can cycle through the selection of functions”HIGH LOW SAUTE STEAM WHITE RICE”. The selected function indicator light flashes, and the digital tube steadily displays the corresponding default time (see Table 1 for details). -
Table 1: List of cooking times
-
cooking function HIGH LOW SAUTE STEAM(jNA) Default time 08: 00 06: 00 00: 15 00: 20 time limit 6-14H 2-8H 5 — 60minute 5 — 60minute step 10minute 10minute 5minute 5minute Remark The digital screen directly displays
the time
countdown while
working| The digital screen
directly displays
the time
countdown while
working| work display
box Swim
clockwise, and
when the
temperature
reaches the
expected value, the
time countdown
will be displayed
(at the same time,
there will be 3
beeps)| work display
box Swi in
clockwise, and
when the
temperature
reaches the
expected value, the
time countdown
will be displayed
(at the same time,
there will be 3
beeps)
cooking function| WHITE RICE| | WARM| DELAY
Default time| N/A| | 00: 00| 02: 00
tine limit| N/A| | 1211| 1-12H
step| Time cannot be
adjusted| | Time cannot be
adjusted| 111
Remark| work display
box Move
clockwise to
display a
12-minute
countdown while
the rice is cooking.| | After all cookingfunctions are completed. it will automatically enter the keep warm function. and the digital tube will display the timing.| Only the “white
rice’ function can
enter the
reservation
function -
Time Setting:
After selecting the function, press“
”key，Enter the cooking time
setting of these lected function, the digital tube flashes to display the
default time, rotate clockwise or counterclockwise “ ”The stepless knob can
adjust the cooking time of the selected function (see Table1 for time range
and steps);
(Start/Stop) key
- After selecting the cooking function, press“ ”(Start/Stop) key to enter theworkingstate of this function, the “COOKING” indicator light is always on, and the digital tube presses “Table 1” to steadily display the set time or swimming frame
- Enter cooking status, press within 3 minutes“ ”(Start/Stop) key to cancel the current working state and return to the active state. After 3 minutes or more, if you need to cancel the current working state, you need to press and hold“ ”(Start/Stop) key for 2seconds to cancel the current working state and return to the active state
- The cooking function automatically switches to keep warm after completion.
(Keep warm) button:
- While active, press“ ”(Keep Warm) button to directly enter the heat preservation working state, the “WARM” indicator light becomes long and bright, the digital tube displays”00:00″,and the countdown starts;
- The keeping warm time cannot be adjusted. The longest keeping warm time is 12 hours.Whenthe keeping warm is completed, the buzzer will sound 3 times and return to standbymode.
(Reservation) button
(the cooking function will start after the reservation time is completed)
- Only “WHITE RICE” can be reserved;
- First select the “WHITE RICE” function, then press“ ”(Reservation) button to enter the reservation setting, the “WHITE RICE” and “DELAY” indicators flash, and the digital tube displays the default time “02:00” (2 hours);
- Rotate clockwise or counterclockwise“ ”Stepless knob, adjustable reservationtime,reservation time range: 1~12 hours, 1 hour step;
- After setting the reservation time, press“
- ”(Start/Stop) button to enter the reservation working mode, the “WHITE RICE” and “DELAY” indicators are always on, the digital tube displays the reservation time, and the countdown starts at the same time
Power-off memory function
If there is a power outage during work, and the power outage time is within 20 minutes(error±10 minutes), it can automatically continue the previous work when it is poweredonagain.If it is powered on again after more than 30 minutes, it will enter the activatedstate
Conservation (Conservation Standard Procedure)
When a sensor failure occurs: the computer disconnects the heating, all buttons areinactive,the buzzer beeps for a long time (1.5 seconds), and all LED lights flash;
The digital tube displays the corresponding code:
- When the bottom sensor branch is open, the digital tube displays E1 in the center;
- When the bottom sensor branch is short-circuited, the digital tube displays E2 in the center;
- Over-temperature protection; when the sensor temperature exceeds 224°C in the”frying”working mode, and when the sensor temperature exceeds 185°C in other working modes,it will enter the over-temperature alarm state (the buzzer will sound for 1 second,stop for2 seconds and alarm for 10 times), and the digital tube will display E5 in the center. When the temperature is lower than 185℃, it will automatically return to the active state when the power is turned on again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>