OneOdio A71 DJ Headphones User Manual

OneOdio A71 DJ Headphones

Product Information

• The DJ Headphones are a high-quality audio accessory designed for professional DJs and music enthusiasts. They provide excellent sound reproduction and a comfortable fit for extended listening sessions. The headphones feature Bluetooth connectivity for wireless music streaming and hands-free calling. They also have a built-in microphone for clear communication.

• The headphones are equipped with safety features to protect the user and the product. They should not be used while driving or in situations where loud unusual noise is emitted. If any issues arise, such as a warming sensation or loss of audio, the headphones should be turned off and OneOdio customer service should be contacted.

• It is important to note that the headphones should not be used as aviation communication headsets unless in case of emergency.
  They contain small parts that may pose a choking hazard, making them unsuitable for children under the age of 3. Additionally, the product contains magnetic material, and users with implantable medical devices should consult their physician to determine if it may affect their device.

• The product should not be exposed to rain, liquids, or moisture to reduce the risk of fire or electrical shock. Unauthorized alterations should not be made to the product, and it should only be used with an agency-approved power supply that meets local regulatory requirements. Products containing batteries should not be exposed to excessive heat.

• Proper antenna placement, separation from other equipment, and connection to different circuits are recommended to ensure optimal performance. In case of any changes or modifications, it is advised to consult the dealer or an experienced radio/TV technician for assistance.

• The product complies with essential requirements and relevant provisions of Directive 2014/53/EU and other applicable EU directive requirements. The complete declaration of conformity can be found on the OneOdio website.

• Furthermore, the product conforms to regulations regarding toxic or hazardous substances and elements. The table provided indicates the presence or absence of such substances in the different parts of the headphones.

Product Usage Instructions

1. Ensure the headphones are fully charged or connected to a power source before use.
2. Turn on the headphones by pressing the power button located on the device.
3. To connect the headphones to a Bluetooth-enabled device, activate the Bluetooth function on the device and search for available devices. Select the headphones from the list of available devices.
4. Once connected, you can use the headphones to listen to music wirelessly or make hands-free phone calls. Adjust the volume using the volume control buttons on the headphones.
5. If you experience any loud unusual noise, warming sensation, or loss of audio, immediately turn off the headphones and contact OneOdio customer service for assistance.
6. Avoid using the headphones while driving or in situations where it may be unsafe to do so.
7. When not in use, store the headphones in a safe and dry place to prevent damage.
8. To clean the headphones, use a soft, dry cloth to gently wipe away any dirt or smudges. Avoid using harsh chemicals or liquids.
9. Follow all safety instructions provided in the user manual to ensure safe and proper usage of the headphones.

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety and use instructions.

WARNINGS/CAUTIONS

• Do NOT use the headphones at a high volume for any extended period.
• To avoid hearing damage, use your headphones at a comfortable, moderate volume level.
• Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level.
• Do NOT use your headphones while driving for phone calls or any other purpose.
• Do NOT use the headphones at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc.
• Remove the headphones, to ensure you can hear surrounding sounds, including alarms and warning signals.
• Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones.
• Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the.
• headphones off and contact OneOdio customer service.
• Remove headphones immediately if you experience a warming sensation or loss of audio.
• Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
• Do NOT use the headphones as aviation communication headsets except in case of emergency.
• No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
• Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
• The headphones are not engineered for noise conditions, altitude, temperature, or other environmental conditions common in non-commercial aircraft, resulting in possible interference with critical communications.
• Contains small parts which may be a choking hazard. Not suitable for children under age 3.
• This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.
• To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids, or moisture.
• Do NOT make unauthorized alterations to this product.
• Use this product only with an agency-approved power supply that meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
• Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire, or the like).

FCC

REGULATORY INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by YI ZHAO (SHENZHEN) CO., LIMITED. could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and Industry Canada radiation exposure limits set forth for the general population. It must not be co-located or operating in conjunction with any other antenna or transmitter.
Meets IMDA Requirements.

CAN ICES-3 (B)/NMB-3(B)

• Management Regulation for Low-power Radio-frequency Devices

Article XII

• According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power, or alter original characteristics as well as performance to an approved low-power radio-frequency device.

Article XIV

• The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved.
• The said legal communications means radio communications operated in compliance with the Telecommunications Act.
• The low power radio-frequency devices must be susceptible to interference from legal communications or ISM radio wave-radiated devices.
• DON’T attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Oneodio retailer or other qualified professional for removal.
• YI ZHAO (SHENZHEN) CO., LIMITED. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements.
• The complete declaration of conformity can be found at: www.oneodio.com

For Europe:

• The frequency band of operation is 2400 to 2483.5 MHz:
• Bluetooth: Maximum transmit power less than 20dBm EIRP.

REGULATORY INFORMATION

• Information on electrical and electronic equipment
• The following notice is aimed at private end users who use electrical and/or electronic devices.

1. Separate collection of old devices Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old devices must collect them separately from unsorted municipal waste. In particular, old devices do not belong in household waste, but in special collection and return systems.

2. Batteries and rechargeable batteries As a rule, owners of old devices must separate old batteries and accumulators that are not enclosed by the old device before handing them over to a collection point. This does not apply if the old devices are handed over to public waste disposal authorities and are separated from other old devices in order to prepare them for reuse.

3. Options for returning old devices

   • If you own old devices, you can hand them over to the options set up and available by public waste disposal authorities for the purpose of proper disposal of old devices. It may also be possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or collection point.

4. Privacy Notice
   Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of.

5. The meaning of the crossed-out dustbin symbol

   • The symbol of a crossed-out garbage can, which is regularly shown on electrical and electronic devices, indicates that the device in question must be collected separately from unsorted municipal waste at the end of its service life.

Names and Contents of Toxic or Hazardous Substances or Elements

 | Toxic or Hazardous Substances and Elements
Part Name| Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent (CR(VI))| Polybrominated Biphenyl (PBB)| Polybrominated diphenyl ether (PBDE)
PCBs| X| 0| 0| 0| 0| 0
Metal Parts| X| 0| 0| 0| 0| 0

Plastic Parts

| 0| 0| 0| 0| 0| 0
Speaker| X| 0| 0| 0| 0| 0
Cables| X| 0| 0| 0| 0| 0

This table is prepared in accordance with the provisions of SJ/T 11364.

|
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement of GB/T 26572.

• Charging temperature range: 0° C – 45° C
• Discharging temperature range: -20° C – 60° C
• C&E Connection E-Commerce (DE) GmbH
• Add.: Zum Linnegraben 20, 65933, Frankfurt am
• Main, Germany
• Tel. +4906927246648
• E-Mail: info@ce-connection.de
• Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED
• Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huawei Cultural And Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen.

UK Declaration of Conformity

• Hereby, YI ZHAO (SHENZHEN) CO., LIMITED declares that the product type Y80B is in compliance with the following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016, and The Restriction of the Use of Certain
• Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the UK Declaration of Conformity is available at the following internet address: www.oneodio.com info@oneodio.com

1. Use carefully with the earphone maybe excessive sound pressure from earphones and headphones can cause hearing loss.
2. Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
3. The device complies with RF specifications when the device is used at 0mm from your body.

Manufacturer’s Name: YI ZHAO (SHENZHEN) CO., LIMITED
Product: Wireless headphone
Model number: A71

FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Share-Port Function

Comfort and Portable

1.2 m 3.5 mm to 3.5 mm cable with microphone

2 m-3 m 3.5 mm to 6.35 mm audio cable

1.2 m 3.5 mm to 3.5 mm cable with microphone

Specifications

• Speaker: 40 mm
• Frequency Response: 20 Hz – 40 kHz
• Sensitivity: 110 dB±3 dB
• Max input power: 30 mW
• Plug Type : 3.5 mm & 6.35 mm Stereo
• Impedance: 32 Ω

Accessories

• 1,2 m 3,5 mm to 3,5mm cable with microphone 2 m – 3 m 3,5mm to 6,35 mm coiled cable Portable bag User manual

Limited Warranty

• Our friendly customer service team is ready and waiting to help. Here is how you can contact us:
• Global: info@oneodio.com
• India: support@oneodio.in
• Global:oneodio.com/pages/support
• Japan:oneodio.jp/pages/support
• Global: +85269403848 (Mon to Fri 9:00 am-6:30 pm, UTC +8 HKT)
• C &E Connection E-Commerce (DE) GmbH
• Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
• Tel.: +4906927246648
• Email: info@ce-connection.de

APEX CE SPECIALISTS LIMITED

• Add.: 89 Princess Street, Manchester, M1 4HT, UK Tel.: +441616371080
• Email: info@apex-ce.com
• Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED
• Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huawei Cultural and Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen City, Guangdong Province, China.
• Email: info@oneodio.com
• Tel.: +85269403848

References

• ce.com
• Connection | Sugata & Freunde: Das Blog fürs Wesentliche
• OneOdio Support/ Warranty
• 保証について – OneOdio
• OneOdio Headphones, Studio & DJ & Bluetooth, oneodio.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>