Govee H6072X82 RGBIC Christmas Floor Lamp User Guide
- June 14, 2024
- Govee
Table of Contents
Govee H6072X82 RGBIC Christmas Floor Lamp User Guide
Installation Step
Step 1
Step 2
lamp pole into the lamp base. Use the screws to secure the final connecting part via the two holes on the bas
Step 3
Straighten the slicone strip light. Connect the wires on the silicone strip light to the wires n the port of the lamp base (wires should be connected by color)
Straighten the slicone strip light. Connect the wires on the silicone strip light to the wires n the port of the lamp base (wires should be connected by color)
Step 4
Ensure the exposed wires are inside the lamp base. Attach the ilcone strp light by following the image above. inally press the striplight from the middle outwards to the two ends.
Step 5
Connect the adapter to the cable of the lamp base and plug the adapter into a socket. Then you can start using the product.
Optional: Attach the holder to the lamp pole and then the remote controller. Rotate the holder to detach it from the lamp pole if you need to remove
Troubleshootin
The slicone light stip i too long.
Take out the strip from the pole; W * Follow step 4 to reinstall,
Note: To avoid deforming the silicone light strip, please press from the top
and bottom first, and then press the middle.
After installing all the poles, the gap between them is large or they are
skewed.
« Remove the screws and connecting pieces; « Follow step 1 to step 2 to
reinstall
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>