ecorelax YK-E138N Gooseneck Electric Kettle with Temperature Control User Manual
- June 14, 2024
- ecorelax
Table of Contents
YK-E138N
User Manual
keep relax and drink coffee
YK-E138N Gooseneck Electric Kettle with Temperature Control
Warning
Do NOT overfill the kettle past the max. water level line (Approximately 8/10
full). This is to prevent possible electrocution / scalding accidents via
boiling water overflow on to the electric platform.
Features
- Food grade 304 stainless steel
- OLED screen display function
- Heat preservation function
- Ergonomic handle with sturdy construction
- British Strix thermostat enabling precise temperature control
- Triple safety protection: Overheat & dry burn protection with automatic power off
Product Descruption
Product Guide
- Before using this product,please read this manual carefully especially the Safety Instructions section.
- Fill the kettle up & place the lid back on tightly(Please adhere to the minimum & maximum water level Guide line).
- Plug in the power cord first place the kettle on the base the button will light up.Click the” ” button once the current water temperature will be displayed on the temperature OLED Display. Click on” “.
- Upon Boiling, the kettle will turn to standby mode , and the water will cool down naturally.
Boil to specified temperature & keep warm:
- Click or hold the”+” or”-” button to select the desired temperature level.
- The water will be heated up & kept warm to the specified temperature for 2 Hours.
Boil to 100°C then keep warm at specified temperature:
- Press the” ” button.
- Till the water boil, click or hold the”+” or”-” button to select the desired temperature level, the kettle will wait for the water cooling down to specified temperature and keep it for2 hours.
If the kettle is not unplugged from the power source the previously adjusted keep warm temperature will remain unchanged.
Button basic & Extra Function
| Timer : When taking away the kettle , press to start counting, press again
to stop counting, long press to reset.
---|---
| Boil : Boil to 212°F without thermal insulation. Long press for 3 seconds,
switch to celsius.
| Temp adjust & keep warm : When boil to specified temp the kettle will
automatic keep warm for 2 hours.
[Tip] Press both bottons for 3 seconds to switch silent mode.
| On/Off : Long press for 3 seconds to turn off.
Tip: Please boil & pour away the full amount of water(Please adhere to
the maximum water level guideline) prior to first time usage.This removes any
unwanted odours.
Repeat if necessary. temperature will remain unchanged.
Never use any abrasive cleaning materials or scrubs to clean any part of the
Kettle.
OLED Display
Specifications
Product Name: Electric Gooseneck Kettle Temperature Control
Input voltage: 120V| Model: YK-E138N
Rated power: 1200W| Maximum capacity: 1.0L
Frequency:60Hz| Material : 304 stainless steel + ABS
Safety Pre-cautions
- Please read this manual carefully before using the product, and use it in the correct way to avoid damage or danger caused by improper practices.
- Please refer to this manual to properly understand the contents of this product, and store this user manual safely after reading for future reference.
- The input power supply of this product is 120V~60Hz, please check the your power source for compatibility.
- Do not use the product if power cord is damaged. Please replace the product by the authorised distributor in your region. Do not disassemble and repair by yourself.
- When filling, cleaning, or not in use, please turn off the kettle switch and unplug the plug.
- While pouring water into the kettle, do not spill the water (especially on the power base). Please ensure the base is dry to prevent electrocution / short circuit.
- Do not exceed the highest permitted water level, otherwise the boiling water may splash out and cause danger.
- Please use this product on a horizontal stable flat surface.
- Overhanging power cords can easily cause accidents. It is recommended to keep the kettle as close to the wall power socket as possible when boiling water to avoid tripping over the kettle and being scalded by boiling water.
- Close the lid of the kettle properly to prevent scalding accidents.
- During the heating process, do not open the lid or move the kettle to avoid being scalded.
- Do not immerse this product and the power cord in any liquid.
- When the room temperature is below 0 degrees Celsius, do not keep the kettle power supply connected to the power plug, otherwise the thermostat will automatically reset causing the component to heat up.
- Do not let the kettle burn dry, and be sure to disconnect the power when not in use.
- This product must be used in conjunction with the power base provided with the kettle.
- Do not place any other liquids other than water into the kettle.
- Please be-careful while pouring out the boiled water to prevent scalding accidents.
- Please ensure the power source socket is in good working order.
- Do not thug on the power cord.
- Do not operate product with wet hands.
- Make sure that the power switch is turned off before the teapot is removed from the power base.
- This product is not intended to be used by users (including children) with insufficient physical, perceptual, mental ability, experience or knowledge.
- Children should be supervised to ensure that children do not play with electrical appliances.
- This product is only suitable for home use, please do not use it for commercial and other purposes.
- The heating element may still be hot after use.
- When the electric kettle is in use or after boiling, do not touch the body of the kettle with any part of the hand or body to avoid scalding.
- When the kettle is in a boiling state, the temperature of the water vapor emitted is extremely high, and please avoid contact the spout directly (or near the spout), with any part of the body, the body of the pot, the lid or the gap between the lid and the handle to avoid the risk of burns or scalds.
- Do not rinse or sprinkle water or soak the outside of the pot body and the power supply base with water to avoid water or leakage from the heating connector, which will causeelectricity & power failure.
Cleaning the kettle
- Unplug the power plug & let the kettle cool prior to cleaning the kettle.
- Do not soak the water bottle, power cord, power plug, and power socket in water.
- Wipe the shell of the kettle with a damp cloth, do not use scrubbing powder, cleaning cream and other products as it will damage the surface of the kettle.
Descalling
In order to keep the kettle in good working condition, it is necessary to
descale frequently.
Pre-mature power cut off incidents may indicate that the kettle needs to be
descaled.
Methods to descale:
- Use a dedicated descaling product
- Add 0.5 litres of 8 – 10 % white vinegar to the pot, leave to soak for 1 hour, drain the white vinegar, and wash with water.
- Add 0.5 litres of water to a boil, then add 25 grams of citric acid, soak for 15 minutes, and wash with water.
Troubleshooting
Auto shut-off before the boil| 1.This problem is usually due to the presence
of scale in the kettle, so it can be removed by eliminating the scale.
2.This may also be inadequate amount of water in the kettle or the inclusion
of an empty kettle, which triggers the kettle protection against running dry.
In order to reset the device again pour cold water into the kettle; reset
security after approximately 2 minutes; then you can restart the kettle.
---|---
Kettle does not work| 1.Make sure the plug is properly inserted into the
socket and that the socket is working.
2.If there is damage to the power cord must be replaced on the same type of
cable for maintenance personnel department manufacturer.
3.If you run the kettle without water protection device cuts off the power
supply.
The water in the kettle has a strange smell| 1.This problem usually occurs
when the kettle is used for the first time. In order to solve this problem,
proceed in accordance with section 6.
2.If the problem persists, fill the kettle with water up to the maximum level,
add two tablespoons of baking soda, and after boiling empty the kettle.
Inside the kettle water is dirty and you can see the scale.| Due to the hard
water, a precipitate forms in the form of calcium
carbonate and magnesium carbonate. Just regularly decalcify kettle.
Environment
This appliance should not be put into the domestic garbage at the end of its
durability, but must be offered at a central point for the recycling of
electric and electronic domestic appliances. This symbol on the appliance,
instruction manual and packaging puts your attention to this important issue.
The materials used in this appliance can be recycled. By recycling of used
domestic appliances you contribute an important push to the protection of our
environment. Ask your local authorities for information regarding the point
of recollection.
IMPORTANT SAFEGUARDS
- Read all Instructions.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock and injury to persons do not immerse kettle, plug or cord in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance mal functions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons.
- Do not use outdoors.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet, To disconnect, turn any control to” “, then remove plug from wall outlet.
- Do not use appliance for other than intended use, For household use only.
- Scalding may occur if the lid is removed during the brewing cycles.
- Do not attempt to dislodge food when toaster is plugged in.
(This may be omitted if toaster employs sheathed type heating elements).
SAVE THESE INSTRUCTION
Short power-supply cord instruction:
a) A short power-supply cord is to be provided to reduce risks resulting from
becoming entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords are available and
may be used if care is exercised in their use.
c) If a long detachable power-supply cord or extension cord is used:1) The
marked electrical rating of the detachable power-supply cord or extension cord
should be at least as great as the electrical rating of the appliance;2) The
extension cord should be a grounding type 3-wire cord; and3) The longer cord
should be arranged so that it will not drape over the counter top ort.
Recommended boiling water temperature
Thank you for your reading!
Welcome to visit our store for more products.
https://www.amazon.com/stores/EcorelaxCoffeeGear/page/32878904-60D7-4D3A-
8B07-ECC992DC595F?ref_=ast_bln|
https://www.amazon.co.jp/s?me=A1DOQRPZ7J4CAT&language=zh&marketplaceID=A1VC38T7YXB528
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>