Keenstone TDQR03A Countertop Dishwasher User Guide
- June 14, 2024
- Keenstone
Table of Contents
- PACKING LIST
- PRODUCT PARAMETERS
- ELECTRICAL DRAWING PRODUCT DIAGRAM
- ELECTRICAL DRAWING PRODUCT DIAGRAM
- CONTROL PANEL
- INSTALLATION
- TABLEWARE DISPLAY
- OPERATION
- FUNCTION
- MAINTAIN & CLEAN
- FAULT & PROBLEM
- IMMPORTANT SAFETY INFORMATION
- SAFETY & WARNING
- ROHS REQUIREMENT
- WARRANTY POLICY
- WARRANTY POLICY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Keenstone TDQR03A Countertop Dishwasher User Guide
PACKING LIST
- 1 × Countertop Dishwasher
- 10 × Spray arm nozzle cleaning brush
- 1 × Inlet hose
- 1 × Drain hose
- 1 × Fruit basket
- 1 × Hose collar
- 1 × Cup
PRODUCT PARAMETERS
Product name | Countertop Dishwasher |
---|---|
Model | TDQR03A |
Voltage | 220V~ |
Frequency | 50Hz |
Power | 950W |
Inlet pressure | 0.04~1.00MPa |
Water consumption | 5L |
Place setting | Two place settings |
Net weight | 28.6 pounds |
Machine size(WXDXH) | 16.8×16.7×18.0 inches |
Carton size(WXDXH) | 18.9×20.1×20.6 inches |
Dry | Hot wind |
Note:
All the above specifications are from our laboratory. Actual results may vary
depending on the product or other factors. The picture is for reference only.
Please refer to the actual product.
ELECTRICAL DRAWING PRODUCT DIAGRAM
ELECTRICAL DRAWING PRODUCT DIAGRAM
Machine
-
Inlet hose x 1 (2m)
-
Drain hose x 1 (2m)
-
Fruit basket x 1
-
Cup x 1
-
Hose collar x 1
-
Spray arm nozzle cleaning brush x 10
CONTROL PANEL
- Dry
- Tank model
- Tap model
- Display screen
- Time display
- Dry indicator
- Temperature
- Door open
- Standard
- Quick
- Eco
- Strong
- Fruit
- Program Selection
- Start/Pause
- Power on/off
INSTALLATION
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a malfunction or breakdown,
grounding reduces the risk of an electric shock by providing a path of least
resistance for the electric current. This appliance is equipped with a cord
with an equipment-grounding conductor and grounding plug. The plug must be
plugged into an appropriate outlet that is installed and grounded in
accordance with all local codes and ordinances.
WARNING – Improper Connection of the equipment-grounding conductor can result in the risk of an electric shock. Check with a qualified electrician or service representative if you are unsure whether the appliance is properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet. Have a proper outlet installed by a qualified electrician.
-
Inlet hose Installation
-
Connect the machine
Insert the inlet hose elbow into the water inlet behind the machine and tighten the screw. -
Connect the tap
A, B, and C are three option for tap connection . However, B and C options require a hole to be made on or behind the cabinet so that the hose can go through the cabinet.
Note:
The product has the characteristic of heating liquid; The water temperature is not to be over 40℃ if not use hot water; the size of the inlet hose elbow is 1/2 with an internal thread, the tap size must be 1/2 with the outer thread
* Connect machine
* Connect tap
-
Drain hose installation
-
Connect the machine
Insert the drain hose elbow to the water outlet behind the machine and tighten the collar. -
Connect the sewer
A, B, and C are three options for the waste connection. B and C options require a hole to be made on or under the cabinet so that the pipe can go through the cabinet.
Note:
A hose that attaches to a sink spray can burst, if it is installed on the same water line as the dishwater. If your sink has one, it is recommended that the hose be disconnected and the hole plugged.
* Connect machine
* Connect waste
TABLEWARE DISPLAY
-
Please get rid of large items of food residue on the tableware to avoid blocking the water hose.
-
Please refer to the right pictures for the tableware display.
Note: To fully clean the tableware, please tilt lt the tableware inside
the dishwasher or put the dirty side face down. Tableware| Quantity
---|---
190mm Dessert plate| 3
130mm Dessert bowl| 1
70mm Mug| 1
60mm Glass| 2
Fork| 2
Knife| 2
Soup spoon| 2
Dessert spoon| 2
Teaspoon| 2
230mm Soup plate| 1
140mm Saucer| 1
78mm Cup| 1
213mm Melamine bowl| 1
Serving Fork| 1
195mm Melamine dessert plate| 1
Cleaning Program: ECO
Under the ECO washing program, add 16g of detergent, then start washing. When there are 18 minutes left before the wash finishes, pause the dishwasher, open the door, add 2ml of rinse aid, and close the door to continue until the dishwasher finishes.
-
78mm Cup
-
78mm Cup
-
195mm Melamine dessert plate
-
230mm Soup plate
-
190mm Dessert plate
-
130mm Dessert bowl
-
70mm Mug
-
140mm Saucer
-
213mm Melamine bowl
-
Cutlery
-
Serving fork
-
Soup spoon
-
Fork
-
Knife
-
Teaspoon
-
Dessert spoon
OPERATION
-
Power on
Plug in, touch“ ”, to turn on the machine.
Note:
Before a program finishes, touch “ ” for 3 seconds to force the machine to turn off.
-
Add detergent
Open the door, add a moderate amount of detergent powder, or one detergent block into the machine and close the door
Note:
No detergent when fruit washing; The dosage: 8-10g for each washing circle. -
Program selection
Touch“”, each of the program indicators will light one by one. Select the program you want.
-
Run the program
Touch “ ”, to run the selected program. The machine will automatically check the water supply.
Note: -
Check the tap or tank model automatically after running the program. If the indicators “ ”“ ” are red, you need open the tap or fill the tank;
-
After five times and there is still no water supply, the machine will enter standby;
-
Touch “ ” to pause the machine to add tableware during washing;
-
Touch “ ” for 3 seconds to quit the program. The machine will drain, then stop;
-
Touch “ ” to add 73 hours of air Circulation to keep the air fresh inside machine.
-
Wash
The machine has two water supply models. The tap model and the tank model.
Note: -
When the indicator “ ” shows white, it is using the tank model;
-
When the indicator “ ” is shows white, it is using the tap model;
-
If the tank is full, the machine will switch into the tank model automatically;
-
Fill the tank with three cups of water, Di, Di, Di will be sounded if the tank is full, and the indicator “ ” will go white;
-
If you are using the tap model, please open the water tap.
Fill water by hand (For tank model)
Connect tap (For tap model)
FUNCTION
Program| Program execution| Time| Detergent|
Temperature| Drying time| Storage(if selected)
---|---|---|---|---|---|---
Standard| Hot water washing Cold water rinsing Cold water rinsing Hot water
rinsing| 69Min| 8g| Washing 131℉ Rinsing 154.4℉| 60Min| Circulating fresh air
for 73 hours
Quick| Hot water washing Cold water rinsing Hot water rinsing| 29Min| 8g|
Washing 122℉ Rinsing 143.6℉| 60Min| Circulating fresh air for 73 hours
Strong| Hot water washing Hot water rinsing Cold water rinsing Hot water
rinsing| 89Min| 12g| Washing 131℉ Rinsing 131℉ Rinsing 167℉| 60Min|
Circulating fresh air for 73 hours
ECO| Hot water washing Cold water rinsing Hot water rinsing| 59Min| 8g|
Washing 131℉ Rinsing 154.4℉| 60Min| Circulating fresh air for 73 hours
Fruit| Cold water rinsing Cold water rinsing| 19Min| /| /| /| /
Dry| /| /| /| /| 60Min| Circulating fresh air for 73 hours
MAINTAIN & CLEAN
-
Clean Filter
-
Disassemble
Rotate anticlockwise to disassemble the filter set. The set has three parts: The filter mesh, main filter, and fine filter. -
Clean
Use water to flush and brush each of the filter parts. -
Assemble
After cleaning, rotate clockwise to close the filter set. -
Clean the spray arms
-
Disassemble
Open the door, take out the basket, then pull out the upper and lower spray arms.
-
Clean
Use water to flush and brush each spray arm. Use tools with sharp points, like needles, to clean the holes if needed. -
Assemble
After cleaning, please press each arm into position. Then make sure the arms can move smoothly
FAULT & PROBLEM
-
Fault codes
Code| Fault| How to resolve the issue
---|---|---
“E2”| Draining| -
Check drain pipe. Ensure the pipe is straight with no bends;
-
Power off, check if anything is blocking the filter or drain pipe;
-
Ensure that the pipes are not blocked by something.
“E3”| Overflowing| Tilt the machine to 30-45 degrees. Let the water flow out from the machine’s base, then restart the machine. If the fault persists, contact our serviceman.
“E4”| Temperature|
Restart the machine. If the fault persists, please contact our serviceman.
“E5”| Massage
“E6”| Heating
“E7”| Pressure
2. Problem (1)
Problem| Reason| How to resolve the issue
---|---|---
The tableware is not clean
| Incorrect tableware loading| Ensure there is enough of a gap between
tableware items.
Spray arm trapped| Check that nothing is trapping the spray arm.
Blocked spray arm| Clean the spray arm.
Blocked filter| Clean the filter set.
Incorrect filter installation| Correctly assemble filter set.
Incorrect program selection| Select the appropriate washing program.
No detergent| Add detergent (block/powder/liquid)
The machine won’t start| Water shortage| Add water until the indicator light
switches off.
The door is not fully closed| Check the door to see if anything is stopping it
from fully closing.
Unable to select a program| In a washing cycle| Re-select the program after a
stop in-progress program or a wait in-progress program finishes.
Problem (2)
Faults | Reason | How to resolve the issue |
---|
Tableware is wet
| Inappropriate program| Select the appropriate program
Poor drying effect for plastictableware| Wipe to dry by hand
Incorrect tableware setting| Set for tableware in accordance with the manual
Drying program not finished| Wait for the drying program to finish
Wooden tableware| Wipe to dry by hand
Discoloration of plastic tableware| Too high a washing temperature| Select a
program with a lower temperature
Detergent left
| Blocked spray arm, no water to flush the detergent| Be sure the spray arm
moves smoothly
Poor quality detergent| Use better quality detergent
Problem (3)
Faults | Reason | How to resolve the issue |
---|
A mount of foam in the machine
|
Using incorrect detergent
|
1. Only use special dishwasher detergent;
2. Open the machine, and wipe out the foam by hand;
3. Add 2-3L of water into the machine. Select any program.After 1-2 mins, the foam will be drained away. This process can be repeated if it is needed.
Abnormal sound in the machine| Spray arm knocking against the tableware| Set
the tableware correctly
The tableware moves slightly| Fix the tableware before washing
Egg yolk left on the tableware| Protein solidification| Clean the tableware
that has egg yolk by hand
Water drops left inside the machine| Not enough drying time| Select the “Dry”
program
IMMPORTANT SAFETY INFORMATION
WARNING!
When using your dishwasher, follow basic precautions,including the following:
SAVE THESE INSTRUCTIONS
- Read all the instruction before using the dishwasher.
- Use the dishwasher only for its intended function.
- Only use detergents or wetting agents recommended for use in a dishwasher and keep them out of the reach of children.
- When loading item to be washed:
- Locate sharp items so that they are not likely to damage the door seal;
- Load sharp knives with the handles up to reduce the risk of cut-type injuries
- Do not wash plastic items unless they are marked ‘dishwasher safe’ or the equivalent. For plastic items not so marked, check the manufacturer’s recommendations.
- Do not touch the hearing element during or immediately after using the dishwasher.
- Do not tamper with the controls.
- Do not abuse sit on or stand on the door or dish rack of the dishwasher.
- To reduce the risk of injury, do not allow children to play in or on a dishwasher.
- Under certain conditions, hydrogen gas may be produced in a hot-water system that has not been used for two weeks or more, HYDROGEN GAS IS EXPLOSIVE. If the hot-water system that has not been used for such a period, before using the dishwasher, turn on all the hot-water faucets and let the water flow from each for several minutes. This releases any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
- Remove the door to the washing compartment when removing an old dishwasher from service or discarding it.
- DO NOT IMMERSE IN WATER.
- HOUSEHOLD AND INDOOR USE ONLY.
- It is forbidden to open the door while the appliance is working to avoid personal danger. Don’t open the door when washing to avoid hot water flying out, which could cause burns.
SAVE THESE INSTRUCTIONS
SAFETY & WARNING
WARNING
- The power socket must be grounded to avoid possible electric leakage or shock;
- To avoid the risk of fire, don’t share one socket with another appliance.
- New parts or the power line will be changed by the serviceman if there has been any damage;
- Dispose of the machine in an environmentally friendly manner under local regulations;
- Do not place the machine in an environment under 0°C, like outside in cold weather;
- Please use proper dishwasher detergent;
- Don’t place and use the machine on an unstable platform or if the platform is wet, smooth, or inflammable to avoid damage;
- Don’t place and use the machine within 150mm of gas stoves or heaters;
- Don’t place any heavy object on the door when the door is open to avoid the risk of the machine turning over;
- Don’t splash water into the machine to avoid an electric shock or fire;
- Don’t drink the water left in the machine;
- Don’t let children operate the machine independently to avoid the danger of accidents.
PRECAUTION
- Don’t open the door when washing to avoid hot water flying out and causing burns;
- Don’t touch or block the side air outlet;
- Don’t hit or move the machine when it is washing;
- Ensure that knives and other sharp objects face downwards to avoid accidents when opening the door;
- Please stop the wash, turn the power off, and close the tap if there are any faults;
- Please check and clean the machine time from time to get the best from your dishwasher;
- Please fix the drain hose to avoid straining the water outflow;
- Don’t pull hard on the power cord, drain the hose, or press the cutlery tray to avoid any damage;
- Don’t use wet hands to operate the machine to avoid electric shocks;
- Children should be kept away from chemical materials such as detergent to avoid accidents.
ROHS REQUIREMENT
Hazardous substance content
Components| Substance
Pb| Hg| Cd| Cr6+| PBB| PBDE
Plastic parts| O| O| O| O| O| O
Metal parts| O| O| O| O| O| O
Rubber parts| O| O| O| O| O| O
Screws| O| O| O| O| O| O
Stickers| O| O| O| O| O| O
Heat plate| O| O| O| O| O| O
Wire| O| O| O| O| O| O
Water pumps| O| O| O| O| O| O
PCB, Fan| X| O| O| O| O| O
Water value| O| O| O| O| O| O
Parts of others| O| O| O| O| O| X
The table is made according to SJ/T11364 standards.
O : indicates the hazardous substance content is below the limits of the
GB/T26572 standards.
X : indicates the hazardous substance content is over the limits of the
GB/T26572 standards but fit for theRoHS order.
The information in the table is offered by suppliers. Under the present regulations, we will keep the lowest level of hazardous substances in all machine parts. We promise to try our best to lower the levels of hazardous substances in the machine by constantly improving the technologies used.
WARRANTY POLICY
Keenstone.com
Please have your Serial Number and Amazon Order ID available when contacting
us for service. Write to us via Support@keenstone.com
for service questions.
For the Period of: | Keenstone Covers: |
---|
One Year
From the date of the original purchase| If the countertop dishwasher fails
due to a defect in materials or workmanship, during the limited one-year
warranty, we will either replace your product with a new product, or refund
the purchase price of the product at our sole discretion.
What Keenstone Will Not Cover:
- Service trips to your home.
- Improper Installation , delivery or maintenance.
- Failure of the product if it is abused, misused, or used for other than the intended purpose or used commercially.
- Replacement of house fuses or resent of circuit breakers.
- Damage caused after delivery.
- Damage to the product caused by accident, fire, floods or acts of God.
- Incidental or consequential damage caused by possible defects with this appliance.
- Labor and other charges to install and/or remove the product.
WARRANTY POLICY
EXCLUSION OF IMPLIED WARRANTIES
Your sole and exclusive remedies are products exchange or refund as provided
in this Limited Warranty. Keenstone products make no other express warranties
with respect to the product, all express and implied warranties for the
product include but not limited to: any implied warranties of and condition of
merchant ability and fitness for a particular purpose, are limited in duration
to the warranty period set forth above and no warranties , whether express or
implied, will apply after the warranty period. Some states, provinces and
jurisdictions do not allow limitations on how long an implied warranty lasts,
so the above limits on may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights, which vary from state to
state or province to province
Note: This limited warranty is extended to the original purchaser for products purchased for home use in the USA. In Alaska and Hawaii, the limited warranty does not include the costs of shipping units
Rapid Service
If you have any problem,
Scan the QR code and contact us
Support@keenstone.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>