OneOdio Pro 50 Over Ear Headphones for Studio Monitoring and Mixing User Manual
- June 14, 2024
- OneOdio
Table of Contents
Pro 50
User Manual
IMPORTANT SAFETY INSTRUCTIONS
Please read and keep all safety and use instructions.
WARNINGS/CAUTIONS
-
Do NOT use the headphones at a high volume for any extended period.
– To avoid hearing damage, use your head -phones at a comfortable, moderate volume level.
– Turn the volume down on your device before placing the headphones in/on your ears, then turn the volume up gradually until you reach a comfortable listening level. -
Do NOT use your headphones while driving for phone calls or any other purpose.
-
Do NOT use the headphones at any time the inability to hear surrounding sounds may present a danger to yourself or others, e.g., while riding a bicycle or walking in or near traffic, a construction site or railroad, etc.
– Remove the headphones, to ensure you can hear surrounding sounds, including alarms and warning signals.
– Be aware of how sounds that you rely on as reminders or warnings may vary in character when using the headphones. -
Do NOT use the headphones if they emit any loud unusual noise. If this happens, turn the headphones off and contact OneOdio customer service.
-
Remove headphones immediately if you experience a warming sensation or loss of audio.
-
Do NOT use mobile phone adapters to connect headphones to airplane seat jacks, as this could result in injury or property damage due to overheating.
-
Do NOT use the headphones as aviation communication headsets except in case of emergency.
– No incoming audio will be heard with a discharged or improperly installed battery. This could result in the potential of missed communications while piloting an aircraft.
– Extremely loud ambient noise levels common to many propeller-driven aircraft may impair your ability to receive incoming audio communications, particularly during takeoff and climb out.
– The headphones are not engineered for noise conditions, altitude, temperature or other environmental conditions common in non-commercial aircraft, resulting in possible interference to critical communications.
Contains small parts which may be a choking hazard. Not suitable for children under age 3.
This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device. -
To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.
-
Do NOT make unauthorized alterations to this product.
-
Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC).
-
Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
REGULATORY INFORMATION
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by YI ZHAO (SHENZHEN)
CO.,LIMITED. could void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC Rules and with Industry Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
This device complies with FCC and Industry Canada radiation exposure limits
set forth for general population. It must not be co-located or operating in
conjunction with any other antenna or transmitter.
Meets IMDA Requirements.
CAN ICES-3 (B)/NMB-3(B)
Management Regulation for Low-power Radio-frequency Devices
Article XIl
According to “Management Regulation for Low-power Radio-frequency Devices”
without permission granted by the NCC, any company, enterprise, or user is not
allowed to change frequency, enhance transmitting power or alter original
characteristic as well as performance to an approved low power radio-frequency
devices.
Article XIV
The low power radio-frequency devices shall not influence aircraft security
and interfere legal communications; If found, the user shall cease operating
immediately until no interference is achieved. The said legal communications
means radio communications operated in compliance with the Telecommunications
Act.
The low power radio-frequency devices must be susceptible with the
interference from legal communications or ISM radio wave radiated devices.
DON’T attempt to remove the rechargeable lithium-ion battery from this
product. Contact your local Oneodio retailer or other qualified professional
for removal.
YI ZHAO (SHENZHEN) CO.,LIMITED. hereby CE declares that this product is in
compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU and all other applicable EU directive requirements. The
complete declaration of
conformity can be found at: www.oneodio.com
For Europe:
Frequency band of operation
2400 to 2483.5 MHz:
Bluetooth: Maximum transmit power less than 20dBm EIRP.
Please dispose of used batteries properly, following local regulations. Do not
incinerate.
Information on electrical and electronic equipment
The following notice is aimed at private end users who use electrical and/or
electronic devices.
-
Separate collection of old devices
Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old devices must collect them separately from unsorted municipal waste. In particular, old devices do not belong in household waste, but in special collection and return systems. -
Batteries and rechargeable batteries
As a rule, owners of old devices must separate old batteries and accumulators that are not enclosed by the old device from it before handing them over to a collection point. This does not apply if the old devices are handed over to public waste disposal authorities and are separated there from other old devices in order to prepare them for reuse. -
Options for returning old devices
If you own old devices, you can hand them over to the options set up and available by public waste disposal authorities for the purpose of proper disposal of old devices. It may also be possible to hand in electrical and electronic equipment there for the purpose of reusing the equipment. You can obtain more detailed information on this from the respective collection or collection point. -
Privacy Notice
Old devices often contain sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for deleting the data on the old devices to be disposed of. -
Meaning of the crossed-out dustbin symbol
The symbol of a crossed-out garbage can, which is regularly shown on electrical and electronic devices, indicates that the device in question must be collected separately from unsorted municipal waste at the end of its service life.
Names and Contents of Toxic or Hazardous Substances or Elements
| Toxic or Hazardous Substances and Elements
Part Name| Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent (CR(VI))|
Polybrominated Biphenyl (PBB)| Polybrominated diphenylether (PBDE)
PCBs| | 0| 0| 0| 0| 0
Metal Parts| | I| | 0| 0| 0
Plastic Parts| | 0| I| 0| 0| 0
Speaker| X| 0| | 0| |
Cables| X| 0| 0| | ()| 0
This table is prepared in accordance with the provisions of SJ/T 11364.|
0: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement of GB/T
26572.
X: Indicates that this toxic or hazardous substance contained in at least one
of the homogeneous materials used for this part is above the limit requirement
of GB/T 26572.
C&E Connection E-Commerce (DE) GmbH
Add.: Zum Linnegraben 20, 65933, Frankfurt am
Main, Germany
Tel. +4906927246648
E-Mail: info@ce-connection.de
APEX CE SPECIALISTS LIMITED
Add.: 89 Princess Street, Manchester, M1 4HT, UK
Tel. +441616371080
E-Mail: info@apex-ce.com
Manufacturer: Yl ZHAO (SHENZHEN) CO,, LIMITED
Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cuitural And
Creative Expo City, No. 5010 Baoan Avenue, Caowei Community, Hangcheng Street,
Baoan District, Shenzhen.
UK Declaration of Conformity
Hereby, YI ZHAO (SHENZHEN) CO., LIMITED declares that the product type Y80B is
in compliance with following Directives: Radio Equipment Regulations 2017,
Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012. The full text of the UK declaration of conformity is
available at the following internet address:
www.oneodio.com
info@oneodio.com
- Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.
- Caution: risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- The device complies with RF specifications when the device used at 0mm form your body.
Manufacturer’s Name: YI ZHAO (SHENZHEN) CO., LIMITED
Product: Wireless headphone
Model number: Pro 50
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Share-Port Function
Ergonomic Design
1.2 m
3.5 mm to 3.5 mm cable with microphone
2 m-3 m
3.5 mm to 6.35 mm audio cable
1.2 m
3.5 mm to 3.5 mm cable with microphone
Specifications
| Driver: | 50 mm |
|---|---|
| Sensitivity: | 110 dB ± 3 dB |
| Plug Type: | 3.5 mm & 6.35 mm Stereo |
| Frequency Response: | 20 Hz – 40 kHz |
| Max input power: | 30 mW |
| Impedance: | 32 Ω |
Accessories
Cable1: 3.5 mm to 3.5 mm cable with microphone (1.2 m)
Cable2: 3.5 mm to 6.35 mm coiled cable (2 m – 3 m)
Portable bag
User manual
Limited Warranty
Our friendly customer service team are ready and waiting to help. Here is how
you can contact us:
Global: info@oneodio.com
India: support@oneodio.in
Global: oneodio.com/pages/support
Japan: oneodio.jp/pages/support
Global: +85269403848 (Mon to Fri 9:00 am-6:30 pm, UTC +8 HKT)
C&E Connection E-Commerce (DE) GmbH
Add.: Zum Linnegraben 20, 65933, Frankfurt am Main, Germany
Tel.: +4906927246648
Email: info@ce-connection.de
APEX CE SPECIALISTS LIMITED
Add.: 89 Princess Street, Manchester, M1 4HT, UK
Tel.: +441616371080
Email: info@apex-ce.com
Manufacturer: YI ZHAO (SHENZHEN) CO., LIMITED
Add.: 6th Floor, T3 Creative Building, Shenzhen Colorful Huiwei Cultural and
Creative Expo City, No. 5010
Baoan Avenue, Caowei Community, Hangcheng Street, Baoan District, Shenzhen
City, Guangdong
Province, China.
Email: info@oneodio.com
Tel.: +85269403848
The power of music!
References
- ce.com
- Connection | Sugata & Freunde: Das Blog fürs Wesentliche
- OneOdio Support/ Warranty
- 保証について – OneOdio
- OneOdio Headphones, Studio & DJ & Bluetooth, oneodio.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>