Govee H6609 Gaming Light Strip Monitor Backlight User Manual

Govee H6609 Gaming Light Strip Monitor Backlight User Manual

Safety Instructions

Read and follow all the safety instructions:

• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip lights during installation, avoid folding the LED components as it may affect the product’s lifespan.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip lights, as it may cause short-circuiting.
• Do not install the strip lights near any heat sources.
• Do not allow children to install the strip lights alone.
• Avoid installing the strip lights near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thanks for choosing the Govee Gaming Light Strip G1! This product can largely improve your experience of using the monitor by picking colors from the screen content and sync to the strip lights installed on the monitor’s back through Govee Desktop, building an immersive lighting atmosphere for you!

What You Get

• LED Strip Lights 1
• Adapter 1
• Control Box 1
• User Manual 1
• Service Card 1

At a Glance

Installing Your Device

1. Preparation Before Installing:
   a. Unbox the strip lights and check all items listed in the packing list.
   b. Power on the strip lights and check whether they light up.

2. Clean the surface with the provided alcohol pad where you plan to install the strip lights.
   

3. Press to ensure the strip lights are fixed firmly on the back of the monitor during the installation. After installation, use the provided cable clips to fix the ends of each strip light and the power cable.
   

4. Connect the adapter with the control box and plug it into the power socket.
   

Pairing Your Device with the Govee Home App

What you need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).

2. Turn on the Bluetooth in your smartphone.
3. Open the app, tap the “+” icon in the top right corner and search “H6609”.
4. Tap the device icon and follow the onscreen instructions to complete pairing.

Connect the device to Govee Desktop to start color picking

1. Download and install Govee Desktop.
   Download here: https://www.govee.com/download/desktop (This software is only applicable to Windows 10 and Windows 11.)

2. Login with your Govee Home account.

3. Make sure your computer and the device has connected to the same internet. The device will be found by Govee Desktop automatically

4. Add the device to the DreamView Group and open the group. The device will then start to pick colors.

Controlling the Device with Your Voice

1. Open the app, then tap the device icon to enter detail page.
2. Tap the setting icon in the top right corner.
3. Select Using Guidance and follow on-screen instructions to control the device using your voice.

Specifications

• Power Input (Adapter) : 100-240VAC 50/60Hz
• Power Input (Control Box): 12VDC 1.5A
• Light Displaying Technology: RGBIC
• Control Method: App, Control Box, Voice Control

Troubleshooting

a. The strip light does not work/is malfunctioning:

• Check if the adapter used is the one provided.
• Power the strip light off then on. Make sure the adapter and the control box have been powered on.
• Long press and hold the power button on the control box and quickly press the middle button four times to restore factory settings.

b. The strip light does not display the full selected color/Some light beads do not light up:

• Please contact Govee Support Team.

c. Cannot connect to Govee Home App:

• Do not skip Bluetooth connection in the app.
• Ensure Bluetooth on your smartphone has been turned on.
• Your smartphone may be incompatible with Govee Home App. Try using a different smartphone.
• Power the strip light and your smartphone Bluetooth off then on, then try again.
• Please ensure your smartphone is within 1m/3.28ft of the strip light when connecting.
• Clear any obstructions that are between the strip light and your smartphone.

d. Cannot connect to Wi-Fi.

• Do not skip the Wi-Fi connecting steps in the app.
• 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
• Connect your smartphone to Wi-Fi and check whether the network works well.
• Make sure that you have entered the correct Wi-Fi name and password.
• Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
• Connect your smartphone hotspot to the strip lights and check whether the router works with the strip lights.

e. Cannot connect to Alexa.

• Unplug every connective part of the strip lights then firmly reconnect them.
• Reset your smartphone Wi-Fi.
• Unplug the adapter port then re-plug it.

Compliance Information

EU Compliance Statement:
Shenzhen Qianyan Technology LTD here by declares that this device is in compliance with the essential requirements and other relevant provisions of the Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.govee.com/

EU contact address:
SUNRISE MOMENTS LIMITED (E-mail:
[email protected]) 1st Floor Newmarket House, Newmarket Square, The Coombe, Dublin 8, DUBLIN, Ireland, D08VAP9

UK Compliance Statement:
Shenzhen Qianyan Technology LTD hereby declares that this device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017 A copy of the UK Declaration of Conformity is available online at www.govee.com/

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting I point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances

For ambiance lighting only. Not for illumination.
This device uses a non-replaceable light source. When the light source reaches the end of its life cycle, this device should be replaced.
The light source or separate control gear is not intended for use in other applications.
Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
Do not use the rope light when covered or recessed into a surface;
Do not open or cut the rope light.
To reduce the risk of strangulation, the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm’s reach.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
   Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

This Class B digital apparatus complies with Canadian ICES-005.

Responsible party (this contact information is only for FCC matters):

Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 2501 Chatham Rd Suite R Springfield IL 62704
Email: [email protected]
Contact information: https://www.govee.com/support

For FAQS and more information, please visit: www.govee.com

Govee Home App

Customer Service

Warranty: 12-Month Limited Warranty

Support: Lifetime Technical Support

Email: [email protected]

@Govee

@govee_official

@govee.official

@Goveeofficial

@Govee.smarthome

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>