Furneet 2 Pack Wireless Lavalier Microphone User Manual
- June 14, 2024
- Furneet
Table of Contents
**Furneet 2 Pack Wireless Lavalier Microphone User Manual
**
Introduction
“Thanks for choosing our product, “This product is a smart wireless microphone
that provides professional-grade recording output. Plug and play, no app
required. Multiple uses: It can be used in online lve broadcast, video Viog
shooting, program interview, recording, video teaching and other occasions.
The wireless Microphone consists of two parts, one is Microphone transmitter ,
the other one is receiver. (See as below picture)
(Microphone transmitter)
(receiver)
ID Diagram
- Windproof net
- Microphone indicator
- Microphone charging port
- Microphone clip
- Switch key
- port to connect phone
- Receiver indicator
- Type-C port of receiver
How to use
Step 1: Connect the receiver to phone with port.
Note: 0ppo /vivo / iqoo / realm brand mobile phones can be used normally
only when they go to the settings. (search “0TG” – turn on DTG pawer supply)
Step 2: press switch key of microphone, the indicator light tumns
green, and then power is tuned on,
Step 3: The indicator red light of receiver keeps always on, then open
the phone camera, live App or other Apps, and then to use the microphone to
receive sound.
Special Note:
For the use of port: there is no battery in receiver, and no need to recharge
during live. If the phone is low power during Live, it can be recharged
directly through port.
About Ul
Microphone Transmitter
Function | How to use | Light |
---|---|---|
Power on | Press switch key about 3seconds | Red and green flash alternately |
Power off | Press switch key about 3seconds | Light off |
Pairing | Red and green flash alternately | |
Paired | Green light keeps on | |
Mute | switch once | Green light flashes |
Press key
Unmute| Press switch key once| Green light keeps on
No connection| No connection for more than 3 minutes, Automatic shutdown|
Light off
Low battery alarm| Power on state| The red and green lights come on
every 10 seconds
Charging| Charging with Type-C cable| The red light goes out when it is fully
charged
Receiver
Function | How to use | Light |
---|---|---|
Power on | Plug in the device | Red light on |
Power off | Plug off the device | Light off |
Pairing | Red light flashes slowly | |
Paired | Red light on |
Note: if one of the two microphones is flashing and not connected, turn off the microphone that has been successfully connected, then unplug the receiver, then turn on the microphone that has not been connected, and then press and hold the switch for 8 seconds until it flashes quickly, and then plug in the receiver. The connection is successful (there is no need to use too much force to switch on and off).
Packing List
Content of packing
- Microphone transmitter
- receiver
- charging cale
- User manual