SZOOMSY VISCA Equipment Interface Camera User Guide
- June 14, 2024
- SZOOMSY
Table of Contents
SZOOMSY VISCA Equipment Interface Camera
Product Information
| Equipment interface | Remote control |
|---|---|
| IR SELECT switch | Camera Power adapter |
| USB interface | Remote control |
| RS232 interface | RS232 Serial Line |
| RS485 interface | USB cable |
| DC interface | 2P terminal |
| Quick entry Instructions | |
| Certificate of Conformity/Quality Assurance Card |
Control Functions
| Number | Name | Brief description of functions |
|---|---|---|
| 1 | Infrared window | Infrared signal emission, do not block when using. |
| 2 | Power switch | Press the camera to enter standby mode. |
| 3 | Mirror | Mirror image |
| 4 | Camera selection buttons | Select the camera to be controlled. |
| 5 | Position buttons | Set preset bit or call preset bit. |
| 6 | PRESET | While holding down the Preset button, press any of the buttons |
to set a preset position.
7| RESET| While holding down the Reset button, press any of the buttons
to reset the camera position.
8| UP| Flips the image upside down.
9| DOWN| Flips the image upside down.
10| PAN/TILT button| Rotates the camera in the indicated direction.
11| HOME| To face the camera back to the front. When entering the menu
state, change the menu value.
12| PT/RESET| Mirror image
13| MENU| Press to enter or exit OSD menu.
14| ZOOM SLOW| Press to zoom in or out slowly.
15| ZOOM FAST| Press to zoom in or out quickly.
16| Focus buttons| Press the MANUAL button, then press either the FAR or the
NEAR
button to focus the camera on the subject.
17| Auto Focus| To focus the camera on a subject automatically.
18| Left/Right setting button| Press the 1 STD/2 REV button while holding down
this
button.
Product Menu Options
You can view and change the parameters of the current camera through the on- screen menu display.
Main Menu
- Video format: factory default value is 1080P30 (unadjustable).
Secondary menu – Exposure
- Brightness: adjust the brightness of the image.
- Language: Chinese/English can be selected.
- Reset: Restore the factory default values of exposure and color.
Secondary menu – Image
- Flip: the image flips up and down.
- Mirror: The image is mirrored left and right.
- Anti-flicker: optional 50Hz/60Hz for anti-flicker of power line.
Secondary menu – Color
- Contrast: dynamically adjust the image contrast.
- Hue: adjust the relative light and dark degree of the pattern, and show it as color on the color image.
- Saturation: adjust the image color effect.
- Sharpness: adjust the sharpness of image edges.
- White balance: manual/automatic white balance selection.
- White balance value: select the corresponding white balance value in manual mode.
Product Usage Instructions
To control the camera:
- Connect the control device to the camera using the RS485 interface.
- Use the camera selection buttons to select the camera you want to control.
- Use the position buttons to set or call preset positions.
- Press and hold the Preset button, then press any of the buttons to set a preset position.
- Press and hold the Reset button, then press any of the buttons to reset the camera position.
- Use the UP and DOWN buttons to flip the image upside down.
- Use the PAN/TILT button to rotate the camera in the indicated direction.
- Press the HOME button to face the camera back to the front and change menu values when in the menu state.
- Press the MENU button to enter or exit the OSD menu.
- Use the ZOOM SLOW and ZOOM FAST buttons to zoom in or out at different speeds.
- Press the MANUAL button, then use the FAR or NEAR button to focus the camera on the subject.
- Use the Auto Focus button to focus the camera on a subject automatically.
- Press the Left/Right setting button while holding down this button to adjust settings.
To view and change camera parameters:
- Press the MENU key on the remote control to enter the main menu of the camera.
- Use the / buttons to navigate through different menu items.
- Press the HOME key to confirm a selection.
- Use the / arrow key to switch between Chinese and English for language selection.
- For parameter modification, select Yes to save the modified parameters or No to discard them.
Equipment interface
| Number | Explain |
|---|---|
| 1 | IR SELECT switch |
| 2 | USB interface |
| 3 | RS232 interface |
| 4 | RS485 interface |
| 5 | DC interface |
Packing list
| Name | Quantity |
|---|---|
| Camera | 1 |
| Power adapter | 1 |
| Remote control | 1 |
| RS232 Serial Line | 1 |
| USB cable | 1 |
| 2P terminal | 1 |
| Quick entry | 1 |
| Instructions | 1 |
Certificate of Conformity/Quality
Assurance Card
| 1
Control
- Factory default of camera: communication protocol VISCA and PELCO-D. address 1, baud rate 9600.
- The control device is connected to the camera through RS485, as shown in the following figure:
Control equipment
Remote control
Number| Name| Brief description of
functions
---|---|---
1
|
Infrared window
| Infrared signal emission, do not block when using.
2| Power switch| Press the camera to enter
standby mode.
3| Mirror| Mirror image
4
| Camera selection buttons| Select the camera to be controlled.
5| Position buttons| Set preset bit or call preset bit.
6
|
PRESET
| While holding down the Preset
button, press any of the Position buttons, 1 – 9.
7
|
RESET
| While holding down the Reset
button, press any of the Position buttons, 1 – 9.
8| UP| Flips the image upside
down.
9| DOWN| Flips the image upside
down.
10
|
PAN/TILT button
| When pressed, the camera
rotates in the direction indicated by the arrow.
11
|
HOME
| To face the camera back to the front. When entering the
menu state, change the menu value.
12| PT/RESET| Mirror image
13| MENU| Press to enter or exit OSD menu.
14| ZOOM SLOW| Slow + Slow –
15| ZOOM FAST| Fast + Fast –
16
|
Focus buttons
| After pressing the MANUAL button, press either the FAR or the NEAR button to
have the camera focus on the subject.
17| Auto Focus| To focus the camera on a subject automatically.
18| Left/Right setting button| Press the 1 STD/2 REV button while holding down
this botton.
Menu
You can view and change the parameters of the current camera through the on- screen menu display； Press the [MENU] key of the remote control to enter the main menu of the camera；
Select different menu items through on the remote control and press the [HOME] key to confirm.
Level 1 Menu ┉ Main Menu
- Language: Chinese/English can be selected. Press the arrow key to switch between Chinese and English.
- Reset: Restore the factory default values of exposure and color. Press the arrow key to select “Yes” or “No”, and press the [HOME] key to confirm.
- Parameter modification: “Yes” to save the modified parameters.
- “No” do not save the modified parameters.
- Press the arrow key to select “Yes” or “No”，Press the [HOME] key to confirm.
Secondary menu ┉ image
- Flip: the image flips up and down. Press the arrow key to switch.
- Mirror: The image is mirrored left and right.
- Press the arrow key to switch.
- Video format: factory default value is 1080P30.
（unadjustable）
Secondary menu ┉ exposure
- Brightness: adjust the brightness of the image;
- Press the arrow key to switch between light and dark values.
- Anti-flicker: optional 50Hz/60Hz for anti-flicker of power line.
Secondary menu ┉ color
- Contrast: dynamically adjust the image contrast.
- Press the arrow key to change the option value, the same below.
- Hue: adjust the relative light and dark degree of the pattern, and show it as color on the color image;
- Saturation: adjust the image color effect;
- Sharpness: adjust the sharpness of image edges;
- White balance: manual/automatic white balance selection;
- White balance value: select the corresponding white balance value in manual mode.