YRU-128 Universal Car Phone Holder Mount User Manual

: June 14, 2024
: YRU

Table of Contents

YRU-128 Universal Car Phone Holder Mount
Product Information
Product Usage Instructions
Product Diagram
Package Contents
Tips for Using the Suction Cup
Clamp the Phone
Using the suction cup
Read User Manual Online (PDF format)
Download This Manual (PDF format)

YRU-128 Universal Car Phone Holder Mount

Product Information

The YRU Car Phone Mount is a product designed to securely hold your phone while driving. It is designed with driver safety, convenience, and elegance in mind. The mount features a silicone support stabilizer to prevent vibration and support the long arm, as well as serve as a cable organizer. The suction cup is upgraded and can be reused after washing without yellowing or melting. The mount is suitable for installation on the dashboard or windshield.

Product Diagram

Car Mount Silicone Pad
Clamp Arm
Release Button
Bottom Tray
Suction Cup Ball Joint
Grip Nut
Angle Adjustment Knob
Telescopic Arm
Length Adjustment Knob
Suction Cup Lock
Rotatable Suction Cup
Silicone Base

Package Contents

Car Mount
Suction Cup
Wet Dry Wipe
Stabilizer with cable organizer (one-time use only)
Cable not included

Product Usage Instructions

Installation

The YRU Car Phone Mount can be installed on the dashboard or windshield of your vehicle.

Practical Tips: The suction cup is suitable for clean, flat, smooth, and non-porous surfaces. If your car has a leather or textile dashboard, it is recommended to install the suction cup on the windshield.

Find a flat and smooth installation spot on the dashboard or windshield.
Clean the surface and wait for it to dry.
Attach the suction cup to the desired spot.
Rotate the suction cup to the desired angle.
Press and hold the suction cup for 5 seconds.
Press the LOCK button to secure the suction cup in place.

If you encounter any problems during installation or have any questions, please contact yrusupport@163.com for assistance.

Removing the Suction Cup

Pull up the lock button to unlock the suction cup.
Pull the tab on the suction cup to allow air to get into it.
Stick a plastic putty knife and floss underneath the suction cup to break the seal.
Once the seal is broken, you will be able to remove the suction cup easier.

Reusing the Suction Cup

If the suction cup becomes loose, wash it and wait for it to dry before reinstalling.
If the dashboard is not clean and the suction cup is easy to shake and loosen, wash the PU gel of the suction cup with water, clean up the dashboard, and then reinstall the suction cup.

If you have any further questions or need support with your YRU Car Phone Mount, please contact yrusupport@163.com.

A Letter from an Engineer

Dear Customer，
As a product engineer, thanks for your detailed suggestions. To live up to your trust, I have been upgrading my products since 2010.

What drives me to be a Car Mount Engineer?

A traffic accident made me realize that the car mount is important for driver safety, cell phone safety, and vehicle safety, especially on the highway. I’ve been reading feedback on Amazon’s car mounts to find inspiration to design a better product for you.

Design priorities: safety first, convenience second, elegance third.

I always design products with driver safety in mind, but it is not easy to match them to hundreds types of cars, and thanks to many users’ suggestions, this product was originally designed with 4 major improvements:

No.1: Without removing the suction cup, our new version can be rotated 360° at any angle when the “LOCK” button is unlocked. (Normal Version: the suction cup can be only adjusted up and down, forward and backward once fixed, but cannot be rotated 360°. )

No.2: The silicone support stabilizer is designed to prevent vibration and support the long arm in case it falls off and also serves as a cable organizer to prevent the car cables from getting messy. (Normal Version: The long telescopic arms vibrate or even fall off during driving.)

No.3: Our upgraded suction cup can be reusable after washing and removed without yellow and melting.

No.4: For better durability (10,000 times) and thermal stability (-45°F~215°F), we adopt healthy refined materials that have been tested hundreds of times.

All the innovation means surprise or risk, but it will work in the long term.

I hope that this new car mount with silicone stabilizer will meet your expectations. If it doesn’t fit your vehicle or any problem, pls contact yrusupport@163.com to get a solution until you have 100% Satisfaction!

Best Regards!

Product Diagram

Package Contents

Installation Spot

Dashboard or windshield.

Practical Tips

The suction cup is suitable for clean, flat, smooth, and non-porous surfaces.

Leather or textile dash surfaces are not suitable for all suction cups, if your car has these dashboards, please install the suction cup on the windshield.

Tips for Using the Suction Cup

Find a flat and smooth dashboard, clean the surface, and wait for it to dry.
After attaching the suction cup, rotate it to a suitable view and then press down the suction cup lock completely to fix it.
Don’t stick the suction cup on a curved surface, plush cloth surface, or uneven surface because it will reduce the adsorbability.
Don’t attach the suction cup to deep texture, leathers, walls, or film-coated surfaces because it will reduce the adsorbability.
In the extreme summer heat: Please install the suction cup on the dashboard, not the windshield, and keep the suction cup away from direct sunlight.
The temperature outside the car is over 104 ℉/40℃ which causes the temperature inside the car to be over 203℉/95 ℃. The adsorption forces would be lower. Please rinse the suction cup to restore the adsorption forces.
You could change the direction of the telescopic arm without removing the suction cup. The suction cup can be rotated 360° after turning on the “LOCK” button. The direction of the telescopic arm will be fixed after pressing the “LOCK” button.
Every time you turn on the suction cup “LOCK” and rotate the suction cup, please press and hold the suction cup for 5s, then press the “LOCK” button again.

Contact yrusupport@163.com to get support if any problems during use.

Tips for Removing the Suction Cup

Pull up the lock button.
Pull the tab on the suction cup to allow air to get into it, and stick a plastic putty knife and floss underneath to break the seal.
Once the seal is broken you will be able to remove it easier.

Tips for Reusing the Suction Cup

If the suction cup is loose, please wash the suction cup and wait for it dry, install it again.
If the dashboard is not clean, and the suction cup is easy to shake and loosen, please wash the PU gel of the suction cup with water, clean up the dashboard, and then reinstall the suction cup.

Clamp the Phone

Press the release buttons on the back of the holder.
Pull down the bottom tray.
Put the phone, and then press the clamp arms

Using the suction cup

Unscrew the nut and remove it.
Insert the ball joint into the back of the holder, and then screw the nut tightly.
Find a flat and smooth surface, and clean it with a wet and dry towel.
Turn on the “LOCK” button of the sucker, then tear off the plastic sealing film on the bottom.
Place the suction cup and rotate it to a suitable view.
Press the base for 5s to make sure it fits the surface, and then press the lock button
Adjust the length and angle of the telescopic arm
Install the stabilizer, and press it firmly to ensure tight adhesion.
Fix the telescopic arm in the notch of the stabilizer to make the bracket more stable Tighten the knob to ensure stability. Leave it for 20mins to ensure the sucker is stable before use.
Place the Phone and plug the cable in the cable organizer hole when not charging.

Rinsing the bottom of the suction cup and then air-drying to restore its adhesion and reuse.

Pull up the lock button and remove the suction cup.

Frequent Q & A:

The correct installation procedure:

How to avoid the mount falling off?
Choose a flat and smooth surface.
Clean the surface and wait for it to dry.
Open the lock button.
Tear off the plastic film on the suction cup.
Place the suction cup and rotate it to a suitable view.
Press the base for 5s and then press the lock button.
Fix the telescopic arm in the notch of the stabilizer to make the bracket more stable.
Wait for 20 minutes, and ensure stability before usage.
It is recommended to install the windshield below these situations:
The surface texture of the dashboard has too deep lines or the slope is too big.
The dashboard is a leather surface, breathable surface, curved surface, plush cloth surface, and uneven surface.
High temperature, strong ultraviolet rays, and dirty surfaces will affect the suction and stickiness, please avoid direct sunlight on the suction cup and clean it to restore vitality.
When the vehicle is regularly maintained, please check the stability of the mount, which depends on:
The local road conditions, temperature, and the severity of ultraviolet rays.
The depth of the texture and slope of the surface.

How to reuse the suction cup?

If the suction cup is loose, simply restore/ clean the sticky gel on your suction cup, rinsing the bottom of the suction cup then air-drying to restore its adhesion and reuse.

We will try our best to deserve your trust. No need to return the items. Replacement, 24-hour response, and 5 years warranty until your 100% satisfaction if any problem: