YRU Universal Car Phone Holder User Manual

: June 6, 2024
: YRU

Table of Contents

Install & Adjust Car Phone Mount
Install the vent clamp
Use the Phone Mount
Kind Reminders & Tips:
Frequent Q & A:
Package Contents
Product Diagram
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

Universal Car Phone Holder
Instruction Manual YRU Universal Car Phone Holder -
fig1

Official Website: yrulife.com
24h Service E-mail: yrusupport@l63.com

Install & Adjust Car Phone Mount

YRU Universal Car Phone Holder -
nut

Unscrew the nut on the bracket.
Put the nut around the ball joint, then insert the ball joint into the socket on the back of the bracket, and screw the nut tightly.
To ensure a clean contact surface, wipe once with a wet and dry towel each.

YRU Universal Car Phone Holder - Suction Cup1

Tear off the plastic film of the suction cup.
Press the suction cup to the surface for 5 seconds, and press the lock button at the 3rd second. Wait for 20 min before usage. After setting up a suitable position, please make sure all knobs we screwed tight! for avoiding shaking.
Reminder: After setting up a suitable position, please make sure all knobs are screwed tightly for avoiding shaking.
Adjust the angle of the mount as you like. Recommended: Make sure the silicone pad is in contact with the dashboard.
Reminder: If the dashboard is not clean, and the suction cup is easy to shake and loosen, please wash the PU gel of the suction cup with water, and clean up the dashboard, then reinstall the suction cup. The suction cup can be used normally.

Install the vent clamp

Unscrew the nut on the bracket, insert the ball head into the socket, and screw the nut.
fix the clip onto the air vent grille, and then tighten the clamp.

Use the Phone Mount

Press the button on the back of the bracket, the clamp arms open automatically.
Pull down the bottom tray to the proper position.
Put the phone in the bracket then press the clamp arms to grasp the phone.

YRU Universal Car Phone Holder - Pul the phone

We are committed to launching high-quality products to customers. if you have any questions, please feel free to contact us. Your question will be answered within 24 hours. Email: yrusupport@163.com

Kind Reminders & Tips:

For Your Driving Safety

Please install the product under the instruction of this manual.
Attention: Please pay attention to maintaining a clear vision after placing the product.
Do not cover the airbag when installing the product.
When checking the car regularly, please also check the stability of the phone holder suction cup.
Please join the YRU CEO (Chief Experience Officer) team to upgrade and experience better products.
The temperature outside the car is 104°F /40 °C. After 30 mins, the temperature inside the car is 203°F /95 °C. Please pay attention to the safety of pets and babies.

Frequent Q & A:

How to avoid the mount falling down?

The correct installation procedure:
1.1 Choose a flat surface
1.2 Wipe the surface and wait for it to dry
1.3 Tear off the plastic film on the suction cup
1.4 Press the suction cup on the dashboard for 4 seconds, then press the suction cup lock at the 3rd second.
is recommended to use the vent clamp holder, below these situations:
2.1 The surface texture of the dashboard has too deep lines or the slope is too big.
2.2 The dashboard is leather surface, breathable surface, curved surface, plush cloth surface, uneven surface.
2.3 The temperature outside the car is over 104°F140 °C, which cause the temperature inside the car to be over 203°F /95 °C.
The weight of your phone and the habit of using the mount, like the arm length you prefer.
High temperature and strong ultraviolet rays will accelerate the aging of the mount, please clean the suction cup to restore vitality.
When the vehicle is regularly maintained, please check the stability of the mount, which depends on:
5.1 The local road conditions, temperature, and the severity of ultraviolet rays.
5.2 The depth of the texture and slope of the surface.

Note: If the suction cup is loose, please wash the suction cup and wait for it dry, install it again. If the vent clamp is loose, please reinstall it.