amazon basics B0B5DHMN7W Portable Air Compressor Pump with Digital Pressure Gauge User Manual

: June 14, 2024
: amazon basics

Table of Contents

amazon basics B0B5DHMN7W Portable Air Compressor Pump with Digital
Product Information
Product Usage Instructions
Important Safeguards
Intended Use
Product Description
Operation
Cleaning and Maintenance
Specifications
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon basics B0B5DHMN7W Portable Air Compressor Pump with Digital

Pressure Gauge

Product Information

The Portable Air Compressor Pump with Digital Pressure Meter B0B5DHMN7W is a compact and convenient device designed to inflate tires, sports equipment, and other inflatable items. It features a digital pressure meter for accurate pressure readings and a built-in LED light for visibility in low-light conditions. The compressor pump operates on a 12V power source and comes with a variety of accessories for versatile use.

Product Usage Instructions

Important Safeguards

```
1.       1. Read and retain the instructions for future reference.
```
1. Only use accessories specified in the instructions or recommended by the manufacturer.
2. Do not inflate any item beyond its maximum specified pressure.

Before First Use

*       1. Inspect the product for any damages.

Intended Use

1.       1. The compressor pump is designed for inflating vehicle and bicycle tires, as well as other inflatable items.

Product Description

```
*       * A – Carrying handle
```
- B – 12V auxiliary cord and plug
- C – Cord storage
- D – Attachment/fuse compartment
- E – 15A replacement fuse
- F – Needle valve adapter
- G – Short air nozzle
- H – Long air nozzle
- I – Light button
- J – Battery/alternator test button
- K – Inflator button
- L – Unit button
- M – Pressure decrease button
- N – Pressure increase button
- O – Pressure level reading
- P – Pressure unit measurement (PSI, BAR, KG/CM2)
- Q – Preset pressure level
- R – LED light/Flashing warning light
- S – Feet
- T – Thread connector
- U – Hose

Switching on/off

```
1.       1.         1. Turn on the vehicle engine.
```
1. Roll out the 12V auxiliary cord and plug (B).
2. Connect the 12V auxiliary cord and plug (B) to the vehicle’s 12V cigarette lighter socket. The display lights up, indicating the product is in standby mode.
3. To switch off the product, disconnect the 12V auxiliary cord and plug (B) from the vehicle’s 12V cigarette lighter socket. The display goes off.
4. Turn off the vehicle engine.

Inflating a vehicle/bicycle tire

```
*       * Turn on the vehicle engine.
```
- Roll out the 12V auxiliary cord and plug (B).
- Connect the 12V auxiliary cord and plug (B) to the vehicle’s 12V cigarette lighter socket. The display lights up, indicating the product is in standby mode.
- Disconnect the tire valve cap.
- Pull out the hose (U) and screw the thread connector (T) ontothe tire’s valve stem.
- Press the button (L) to select the desired pressure unit measurement (PSI, BAR, KG/CM2).
- Set the required pressure by pressing the button (N) or button (M) to increase/decrease the pressure. The displayed figure will keep flashing once the desired pressure is reached.
- Press the button (K) to begin inflating.

Important Safeguards

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using electrical products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:

CAUTION
Only use accessories specified in the instructions, or recommended for use by the manufacturer.

CAUTION Risk of injury!
This product is capable of producing a high pressure. Do not inflate any item beyond its maximum specified pressure.

Do not over inflate tires or inflatable items beyond manufacturer’s recommendations.
Do not allow the compressor or its components to get wet.
Do not leave the product unattended while in operation.
Do not use this product for other than its intended use.
Do not allow children to handle or operate the product.
This product is not a toy. Keep children away.
Do not disassemble or tamper with the compressor.
If the compressor emits abnormal sounds or overheats, switch it off immediately and let it cool off for at least 30 minutes.
Inspect the product before use. If cracked, broken or damaged parts are found, a qualified technician should repair any damaged parts.
Never aim the compressor nozzle at yourself, others or animals.
Do not operate the product when you are tired or under the influence of alcohol, drugs or intoxicating medication.
Do not operate the product if any parts are missing or the product is damaged, as this may cause failure and/or personal injury.
Make sure the cord is not exposed to hot objects, oil or sharp edges.
Disconnect the plug from the cigarette lighter socket after use, and when cleaning or maintaining the product.
Using the product for extended periods of time can completely discharge vehicle battery.
Disconnect the plug whenever engine is turned off for extended periods of time. The power does not turn off after switching off the engine in some vehicle. If the plug is left connected, the battery may become discharged or damaged.
This product contains no user serviceable parts and requires little maintenance. Leave any servicing or repairs to qualified personnel only.
The built-in LED light is not replaceable.
Avoid extended and continuous use. The optimum time for continuous use is 10 minutes.
After extended use, let the pump rest for 10 minutes before using it again.

Work area safety

Keep work area clean, well lighted, well-ventilated and free of combustible materials. Cluttered areas invite injuries.
Never operate the product near flammable substances like gasoline, naphtha, cleaning solvents, etc.
Never expose the product to rain, frost or temperatures above +104°F (+40 °C) or below -22 °F (-30 °C).
Wear eye protection. A loose or unsecured tire connector can project quickly from the tire valve during operation and can cause serious injury or blindness.
Wear heat resistant gloves to protect hands from high temperatures. The thread connector gets hot during operation and can cause burns.

amazon-basics-B0B5DHMN7W-Portable-Air-Compressor-Pump-with-Digital-Pressure-
Gauge-FIG-1

SAVE THESE INSTRUCTIONS

Before First Use
DANGER Risk of suffocation!

Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
Remove all the packing materials.
Check the product for transport damages.
When using in a vehicle or on a boat, connect to a 12 V electrical system only. Some vehicles operate on 24 V or 36 V electrical systems. Refer to the operating instructions of your vehicle or consult your workshop if you have any concerns.

Intended Use

This product is intended for inflating tires on vehicles, bikes, sedans, midsize SUVs (engine size under 0.92 gal (3.5 L)), sporting equipment or other inflatable items. It is designed for occasional use only.
This product is intended for checking tire pressure, car battery condition and alternator condition.
The universal valve connector for schrader valve is ready to use.
The appliance does not support trucks including light trucks or heavy duty trucks.
This product is intended to be used in indoor areas, and it is not water-proof. Keep away from rain.
No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

NOTICE
The pressure gauge is not a calibrated instrument. It is recommended to use a calibrated tire pressure gauge for an accurate final reading.

Product Description

amazon-basics-B0B5DHMN7W-Portable-Air-Compressor-Pump-with-Digital-Pressure-
Gauge-FIG-3

A: Carrying handle
B: 12 V auxiliary cord and plug
C: Cord storage
D: Attachment/fuse compartment
E: 15 A replacement fuse
F: Needle valve adapter
G: Short air nozzle
H: Long air nozzle
I: Light button
J: Battery/alternator test button
K: Inflator button
L: Unit button
M: Pressure decrease button
N: Pressure increase button
O: Pressure level reading
P: Pressure unit measurement PSI, BAR, KG/CM2
Q: Preset pressure level
R: LED light/Flashing warning light
S: Feet
T: Thread connector
U: Hose

Operation

Switching on/off

Turn on the vehicle engine.
Roll out the 12 V auxiliary cord and plug (B).
Connect the 12 V auxiliary cord and plug (B) to the vehicle’s 12 V cigarette lighter socket. The display lights up, the product is in standby mode.
To switch off the product, disconnect the 12 V auxiliary cord and plug (B) from the vehicle’s 12 V cigarette lighter socket. The display goes off.
Turn off the vehicle engine.

Inflating without preset function

The product can be operated without preset function, suitable for inflating balloons, inflatable swimming pools and other similar items.
To operate the product without a preset, press the button (M) to set the pressure gauge to ‘0’ before inflating.
When inflating vehicle/bicycle tires, always follow the manufacturers recommended tire pressure.

NOTICE
The product has an auto shut off function. Once the pre-set pressure is reached, the product shuts off automatically.

Inflating a vehicle/bicycle tire

NOTICE

If the pressure in the tire is higher than the set pressure, the compressor will not start. If this happens, loosen the thread connector (T) to release air from the tire until the pressure is lower than the set pressure or increase the set pressure higher than in the tire.
The product records the last preset pressure. If you preset the pressure gauge to 45 PSI, the product records the preset pressure at 45 PSI for the next use.
This product is equipped with an auto shut-off digital pressure gauge. The digital gauge can be used to monitor air pressure when inflating desired objects, and can automatically shut off once preset desired pressure is reached.
To avoid over-inflation of tires, check the recommended vehicle tire pressure in the vehicles owner’s manual. For bicycle tires, check the tire markings.

Turn on the vehicle engine.
Roll out the 12 V auxiliary cord and plug (B).
Connect the 12 V auxiliary cord and plug (B) to the vehicle’s 12 V cigarette lighter socket. The display lights up, the product is in standby mode (Fig. 1).
Disconnect the tire valve cap.
Pull out the hose (U), then screw the thread connector (T) onto tire’s valve stem (Fig. 2).
Press the button (L) to select the desired pressure unit measurement (PSI, BAR, KG/CM2).
Set the required pressure by pressing the button (N) or button (M) to increase/decrease the pressure. Once the desired pressure is reached, the displayed figure will keep flashing.
Press the button (K) to begin inflating.
Once inflating has finished, disconnect the thread connector (T) from the tire’s valve stem and replace the tire valve cap.
Disconnect the 12 V auxiliary cord and plug (B) from the vehicle’s 12 V cigarette lighter socket. The display goes off.
Turn off the vehicle engine.

NOTICE
The product has an auto shut off function. Once the pre-set pressure is reached, the product shuts off automatically.

When inflating a totally flat tire still fitted on a vehicle, there should not be any weight on it. The vehicle must be jacked up to take the weight off the tire. The time taken to inflate a tire depends upon the volume of air and pressure required.

Inflating sporting equipment and other items

Turn on the vehicle engine.
Roll out the 12 V auxiliary cord and plug (B).
Connect the 12 V auxiliary cord and plug (B) to the vehicle’s 12 V cigarette lighter socket. The display lights up, the product is in standby mode (Fig. 1).
Pull out the hose (U), then screw the required attachment head (F/G/H) to the thread connector (T) (Fig. 3).
Insert the attachment head (F/G/H) into the valve of the item to be inflated.
Press the button (L) to select the desired pressure unit measurement (PSI, BAR, KG/CM2).
Set the required pressure by pressing the button (N) or button (M) to increase/decrease the pressure. Once the desired pressure is reached, the displayed figure will keep flashing.
Press the button (K) to begin inflating.
Once inflating has finished, disconnect the attachment head (F/G/H) from the inflated item’s valve.
Unscrew the attachment head (F/G/H) from the thread connector (T).
Disconnect the 12 V auxiliary cord and plug (B) from the vehicle’s 12 V cigarette lighter socket. The display goes off.
Turn off the vehicle engine.

Typical inflation pressure
Avoid over-inflating. Never exceed recommended pressure. The item being inflated may burst and cause serious injury.

Shock absorber PSI
Normal load 40
Heavy load 90
Bicycle tires 35-40 PSI

Other inflatables	PSI
Football	13
Basketball	9
Volleyball	5
Lawn tractor tire	22
Boat (2 man)	Firm
Mattress	Firm

CAUTION
Soft inflatable material items will not have existing pressure reading. Be careful not to over-inflate.

LED light/flashing warning light

Press the button (I) once to switch on flashing light mode for emergency use.
Press the button (I) twice to switch on LED light mode for use during low light conditions.
Press the button (I) three times to switch off the light.

Testing the car battery

NOTICE
Turn off vehicle’s engine before testing the battery voltage.

Roll out the 12 V auxiliary cord and plug (B).
Connect the 12 V auxiliary cord and plug (B) to the vehicle’s 12 V cigarette lighter socket. The display lights up, the product is in standby mode.
Press the button (J) once. The display shows battery voltage and condition (Fig. 4).

amazon-basics-B0B5DHMN7W-Portable-Air-Compressor-Pump-with-Digital-Pressure-
Gauge-FIG-13

Reading	Condition
LOW:	Battery voltage is low. Consult repair garage for advice and

professional repair.
MID:| Battery voltage is moderate. It is recommend to check batteries condition periodically to make sure the condition does not worsen.
FULL:| Battery condition is normal.

Testing the car alternator

Roll out the 12 V auxiliary cord and plug (B).
Connect the 12 V auxiliary cord and plug (B) to the vehicle’s 12 V cigarette lighter socket. The display lights up, the product is in standby mode.
Press the button (J) twice.
Turn on the vehicle engine and make sure the vehicle is in neutral gear.
Press on the gas to rev the engine at 2000 rpm for 1 minute. The display shows alternator output voltage and condition (Fig. 5).

amazon-basics-B0B5DHMN7W-Portable-Air-Compressor-Pump-with-Digital-Pressure-
Gauge-FIG-13

Reading	Condition

LOW:

| Alternator voltage is low. Consult repair garage for advice and professional repair.
CHARGE:| Alternator voltage is good.

OVER:

| Alternator voltage is too high. Consult repair garage for advice and professional repair.

Cigarette lighter plug fuse replacement

The cigarette lighter plug is equipped with a fuse rated 15 A. Replace blown fuse with one of the same type (Fig. 6).

Open the cap of the plug by loosening it in a anti-clockwise direction.
Remove and replace the fuse with the same type (15 A).
Close the cap in a clockwise direction.

amazon-basics-B0B5DHMN7W-Portable-Air-Compressor-Pump-with-Digital-Pressure-
Gauge-FIG-14

Cleaning and Maintenance

NOTICE

Unplug the product before cleaning.
During cleaning do not immerse the the product in water or other liquids. Never hold the product under running water.

Cleaning

To clean the product, wipe with a soft, slightly damp cloth.
Wipe the product dry after cleaning.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Storage

Wrap the 12 V auxiliary cord and plug (B) around the cord storage (C) and insert the plug in the holder (Fig. 7).

amazon-basics-B0B5DHMN7W-Portable-Air-Compressor-Pump-with-Digital-Pressure-
Gauge-FIG-15

Store the product in its original packaging in a dry area. Keep away from children and pets.

Maintenance

Any other servicing than mentioned in this manual should be performed by a professional repair center.

Frequently Asked Questions

Problem	Possible causes	Solution
Product does not operate.		No power.

connected properly to the cigarette lighter socket. Check if the cigarette lighter socket works.
| | Blown fuse.|

| Check the fuse is inserted correctly. Replace the fuse, refer to ‘Chapter 5.8’.
| | Compressor overheated.| | Allow the product to cool down for 15 minutes before operating again.
| | Preset pressure is lower than the current tire pressure.| | Increase the preset pressure.

Release pressure from the tire to below the preset pressure on the product.

Air leaking.| | Loose connections Damaged hose (U).| | Make sure the thread connector (T) is connected properly to the tire valve. Consult a professional repair centre.
Inconsistent

pressure reading.

| | The pressure gauge is broken or not calibrated.| | Consult a professional repair centre.

Disposal

Dispose of the product according to local regulations. If in doubt, consult your local authorities.

Disposal (for Europe only)

The Waste Electrical and Electronic Equipment (WEEE) laws aims to minimise the impact of electrical and electronic goods on the environment and human health, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centres in order to conserve natural resources. Each country should have its collection centres for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Specifications

Model	B0B5DHMN7W
Input voltage	12 V
Maximum pressure	150 PSI (10.3 bar)
Cylinder diameter	11.8″ (30 mm)
Fuse	15 A
Net weight	approx. 5.04 lbs (2.29 kg)
Dimensions (W x H x D)	9.25 x 9.25 x 4.53″ (23.5 x 23.5 x 11.51 cm)

Feedback and Help
We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader: