BARSKA BC569 Starwatcher 525 Power Instruction Manual
- June 14, 2024
- BARSKA
Table of Contents
BARSKA BC569 Starwatcher 525 Power
CAUTION: DO NOT LOOK DIRECTLY AT THE SUN. VIEWING THE SUN OR ANY LIGHT SOURCE WITH THIS OPTICAL DEVICE CAN CAUSE PERMANENT EYE DAMAGE.
-
A Three Eyepiece Containers
-
B Three Eyepieces
-
C Parts Included
-
D Three Leg to Yolk Screws
-
E Three Tripod Leg Screws
-
F Screwdriver
-
G Moon Filter
-
H Find erscope
-
I Yolk Mount
-
J Three Tripod Screws
-
K Accessory Tray
-
L Barlow Lenses
-
M Slow Motion Control Rod
-
N Control Rod Screw
-
P Three Tripod Legs
-
O Main Telescope Optical Tube
Assembly
Attach (E) tripod leg screw to the extension base on each of the (P) tripod
legs.
Attach each (Q) tripod leg to the (I) yolk mount using the (D) leg to yolk
screw sets.
Use the (J) center leg brace screws on accessory tray (K) on each of the
center leg braces to the three (P) tripod legs.
Line up the (O) main telescope optical tube with the side mount holes on the
(I) yolk mount and secure in place using the two (C) optical tube screws.
Insert the (M) slow motion control rod into the hole on the (I) yolk mount.
Then secure the (M) slow motion control rod with the included (N) control rod
screw by tightening it with the included (F) screwdriver.
Slide (H) finderscope till it locks in place to (O) main telescope optical
tube with the battery compartment and lens facing the front of the telescope.
Insert the chrome barrel of the (L) barlow lens into the focuser tube on the (O) main telescope optical tube and tighten the set screw.
Choose one (B) eyepiece and insert the Barlow Lens of the eyepiece into the
(L) Barlow and tighten the set screw. For detailed usage see included
telescope manual.
Customer Support
© 2018 BARSKA®
Pomona, CA 91767 | (t) 888.666.6769 | (f) 909.445.8169 |
www.barska.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>