amazon basics B0BCW2BGZ3 Standard Elongated Toilet Seat Bidet User Guide

Standard Elongated Toilet Seat Bidet with Automatic Cleaning

Important Safeguards

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

• For domestic use only.
• This product must be installed by an adult.
• Keep children and pets away while installing the product.
• Do not climb on top of the toilet lid. Do not lean back against the toilet lid.
• Do not use this product if any parts are missing, damaged, or worn.
• Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.
• Do not use power tools to assemble the product. Power tools may strip or damage the parts.
• Clean the toilet and surrounding area to maintain hygiene before installing the product.
• Always turn off the water supply before installing or performing maintenance on the product.
• Do not over-tighten any components as this may result in leaks and other damage.
• Check for leaks periodically after installation.
• Connect only to a water supply from a fresh water source. Do not use a hot water supply line.
• Do not use excessive force to open or close the toilet seat and toilet lid.
• Do not use toilet deodorizer on plastic parts. Inmediately wipe off any toilet deodorizer that makes contact with plastic parts.
• Do not expose the toilet to direct sunlight.
• Do not place a heater near the toilet body.
• When the toilet is not to be used for an extended period of time, close the water shut-off valve.
• Perform anti-freezing procedures when there is possibility for freezing to occur.

Toilet Compatibility and Fit

• This product is compatible with a standard two-piece toilet consisting of a toilet bowl and a tank with visible water supply connections.
• Check the toilet measurements to ensure best fit.
• This product is not compatible with rimless toilet bowls where the flush jet is at the back of the bowl.
• This product is not compatible with French curve toilets with the toilet bowl and tank combined in one unit.

Tools Needed

Before First Use

DANGER Risk of suffocation!
Keep any packaging materials away from children and pets — these materials are a potential source of danger, e.g. suffocation.

• Remove all the packing materials.
• Remove and review all components before installation.
• Check the product for transport damages.

Product Description

A Bidet seat
B Paper template
C Fixing plate
D T-shape adapter
E Expanding nuts
F Washers
G Flexible hose with plastic hex wrench| H wing nuts
I Bolts
J Rear wash spray arm/nozzle
K Feminine wash spray arm/nozzle
L Rear wash knob setting
M Wash setting knob
N Feminine wash setting
---|---

Installation

1. Unfasten and remove the existing toilet seat and lid (Fig. 1).
   

2. Place the expanding nuts (E) (Fig. 2) or wing nuts (H) (Fig. 3)
   (depending on your toilet’s design), into the fastening holes on the toilet bowl.
   

3. Place the paper template (B) onto the toilet bowl to match the shape of the bidet over the bowl (Fig. 4).
   

4. Fit the fixing plate (C) onto the bowl and align it with the template (B). Install the washers (F) and bolts (I) into place
   (Fig. 5). Thread the bolts (1) through the holes on the toilet bowl. Do not fully tighten the bolts (1) at this stage.
   

5. Remove the paper template (B). Slide the bidet seat (A) onto the fixing plate (C) until it snaps into place (Fig. 6). Make final adjustment to the seat position and fully tighten the bolts (1).
   

6. Turn off the main water shut-off valve and loosen the existing toilet’s flexible hose from the tank (Fig. 7).
   

7. Connect the T-shape adapter (D) to the water inlet (O) (Fig. 8). Ensure the gasket is present inside the T-shape adapter (D).
   

8. Connect the existing toilet’s flexible hose onto the T-shape adapter (D) (Fig. 9). Tighten the connection using the provided plastic hex wrench.
   

9. Remove the plastic plugs from both ends of the flexible hose (G). Connect the flexible hose (G) to the T-shape adapter (D) first, then to the water inlet (O). Ensure the gasket is present inside each end of the flexible hose (G) (Fig. 10). Tighten the connection  using the provided plastic hex wrench on the flexible hose.
   

10. Slowly turn on the main water shut-off valve.

11. Carefully check all the connections for any leaks.

Use

CAUTION Risk of injury!
Ensure the water pressure is at a comfortable level. High
water pressure may result in minor injury or discomfort.

1. Sit firmly on the bidet toilet seat (A).

2. Turn the wash setting knob (M) to the desired knob setting and pressure level (Fig. 11).
   

3. When finished, turn the wash setting knob (M) to the off position.

Cleaning and Maintenance

8.1 Cleaning

• The nozzles (J, K) self-clean before they spray water.
  However, it is important to periodically check for stains and mold.

• To clean the product, use a mild cleaner suitable for plastic and wipe with a soft, slightly damp cloth. Wipe with a soft, dry cloth to dry the product.

• Do not use bleach or cleaners containing bleach.

• Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product. This may damage the product’s surface.

8.1.1 Cleaning the nozzles

1. Open the toilet lid and seat.
2. Gently pull out the spray arms (J, K) to access the nozzles (Fig. 12). Use a soft cloth, sponge, or toothbrush with soap to  clean as necessary.

8.2 Maintenance

• Check the components regularly to make sure all bolts are tightened.

8.2.1 Removing the bidet seat for detailed cleaning

1. Close the toilet lid and seat.
2. Push the release button on the right-hand side and pull the bidet seat out (Fig. 13).

8.2.2 Removing the regulator

1. Turn the wash setting knob (M) to either the rear wash (L) or feminine wash setting (N).
2. Use a screwdriver to hook onto the inside of the regulator and slide it out to remove it (Fig. 14).
3. Turn the wash setting knob (M) to the off position.

NOTICE   The regulator should be removed if the water supply pressure is less than 0.07 Mpa.

Disposal

Dispose of the product according to local regulations.
If in doubt, consult your local authorities.

Frequently Asked Questions

• Turn the wash setting knob (M) to the maximum pressure level.
•  The water pressure is lower than 0.07 Mpa. Remove the regulator. See chapter  Cleaning and Maintenance.
Water doesnot come out of the nozzle.| • The water shut-off valve is turned off.
Turn it back on.
• The filter screen in the flexible hose (G) is stuck. Clean the filter screen.
• The nozzle (J, K) is clogged. Take out the nozzle and clean it.
• The water supply pressure is too low.
Increase the external water pressure.
Water leaks from the bidet seat base.| • The water supply pressure is too high.
This product can only support up to 0.8 Mpa. Reduce the external water pressure.
• Ensure the regulator is positioned properly in place.
• The gasket inside the flexible hose (G) or T-shape adapter (D) is missing or is worn. Replace gasket(s) with a new one of the same type.

Specifications

(0.35-1.8 L/min)
Water source| Fresh cold tap water
Maximum water temperature| 104 °F (40 °C)

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader:

https://www.amazon.com/
review/review-your- purchases/listing/?ref=HPB_UM_CR

If you need help with your Amazon Basics product, please use the website or number below.

amazon.com/gp/help/customer/contact-us
+1877-485-0385

amazon.com/AmazonBasics
MADE IN CHINA
FABRIQUE EN CHINE
HECHO EN CHINA
V03-10/23

Documents / Resources

| amazon basics B0BCW2BGZ3 Standard Elongated Toilet Seat Bidet [pdf] User Guide
C16ki, GLsVL, B0BCW2BGZ3 Standard Elongated Toilet Seat Bidet, B0BCW2BGZ3, Standard Elongated Toilet Seat Bidet, Elongated Toilet Seat Bidet, Toilet Seat Bidet, Seat Bidet, Bidet, Standard Seat Bidet
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>