OPPO Enco W12 Ture Wireless Earbuds User Guide
- June 14, 2024
- OPPO
Table of Contents
Enco Air
True Wireless Earbuds
Quick start guide
Overview and package contents
This box contains a pair of OPPO Enco Air True Wireless Earbuds, a charging case, a USB-C charging cable, a quick start guide, and a safety guide.
Bluetooth pairing
- If you are using your OPPO Enco Air earbuds for the first time, open the charging case with your earbuds inside. The earbuds will automatically enter pairing mode.
- Turn on Bluetooth on your phone:
• Pairing for the first time: Open the charging case with your earbuds inside, and your earbuds will automatically enter pairing mode. You can begin pairing your phone or any other device by going to the device’s Bluetooth setup page and finding “OPPO Enco ir”.
• Quick pairing: Hold your OPPO Enco Air earbuds near an OPPO phone that has Bluetooth turned on. A popup will appear on your phone. Complete pairing according to the onscreen instructions.
※ Note: Only some OPPO phone models support quick pairing. For details, visit www.oppo.com.
Auto reconnection
When you open the charging case with your OPPO Enco Air earbuds inside, your earbuds will automatically reconnect to the most recently connected device. If they cannot find or fail to connect to the most recently connected device, they will enter pairing mode which will allow them to be connected to another device.
Pairing with other devices
Automatically enter pairing mode: If your OPPO Enco Air earbuds have
automatically reconnected to the last connected device, disconnect the
Bluetooth on that device first, and your earbuds will automatically enter
Bluetooth pairing mode. You can now pair your earbuds with a new device on the
device’s Bluetooth setup page.
Manually enter pairing mode: Wear your earbuds and touch and hold the
control areas on both earbuds for 4 seconds. Your earbuds are ready to be
paired after you hear 4 beeps. You can now pair your earbuds with a new device
on the device’s Bluetooth setup page.
Charging
Battery level
- When your earbuds are inside the charging case, the indicator shows the battery level of the earbuds. When you remove your earbuds from the charging case, the indicator shows the battery level of the charging case itself.
- Different indicator colors are used to show the battery level: red indicates low, yellow indicates medium, and green indicates full or sufficient.
Charging your earbuds
To charge your earbuds, put them inside the charging case and close the case
lid.
Charging the charging case
To charge your charging case, connect it to a power source using the included
USB-C charging cable.
The indicator will light up when charging. Yellow indicates charging in
progress, and green indicates that charging is complete.
※ Charge the charging case and earbuds regularly. Leaving your earbuds or
charging case fully discharged for more than two months may damage the battery
inside.
※ Make sure the charging pins of the earbuds and charging case are dry and
clean before charging.
Otherwise, they can be damaged by corrosion.
Touch controls
| Function | Left | Right |
|---|---|---|
| Next track | Double-tap | Double-tap |
| Answer/End calls | Double-tap | Double-tap |
| Voice Assistant | Triple-tap | Triple-tap |
※ Voice Assistant is available only on some phone brands or models.
Custom settings
You can customize touch control settings for the left and right earbuds on
your phone.
ColorOS
Go to “OPPO Enco Air – EARBUDS FUNCTIONS” on the Bluetooth setup page of your
phone to customize settings.
※ Available on phones running ColorOS 11.0 and later versions.
Android
Find the “HeyMelody” app in your app store and install it. You can customize
touch settings in the app.
※ Available on phones running Android 6.0 and later versions.
※ Go to the product details page on OPPO’s official website to view the list
of app stores where the
“HeyMelody” app is available.
Reset to factory settings
Touch and hold the touch control areas on both earbuds for 15 seconds until
you hear an alert tone. This will reset the earbuds to factory settings.
Specifications
| Earbuds model | ETI61 |
|---|---|
| Charging case model | ETI62 |
| Driver | 12 mm dynamic driver |
| Frequency response range | 20 Hz – 20 kHz |
| Microphone sensitivity | -38 dBV/Pa |
| Bluetooth codec | AAC/SBC |
| Bluetooth version | 5.2 |
| Bluetooth range | 10 m |
| Battery type | Rechargeable Li-ion Battery |
| Battery capacity | 25 mAh (earbuds) 440 mAh (charging case) |
Media playback time
(50% volume)
| 4 h (single charge) 24 h (with charging case)
Charging time*| 1.5 h (earbuds) 1.5 h (earbuds + charging case)
Charging input (charging case)| 5 V 2 A
- All these specifications were obtained based on tests in OPPO laboratories. The battery capacity, media playback time, and charging times were tested in OPPO laboratories at a temperature of 25°C using an OPPO standard charger. The actual results may differ slightly based on environmental factors and the charger used.
- This guide is provided for reference only. Functions and features may differ depending on the product.
52070169
52070169 V1.0 Earbuds model: ETI61 MADE IN CHINA
Copyright © Guangdong OPPO Mobile Telecommunications Corp., Ltd. 2021. All
rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>