CISCO 0401B2757 Room Bar Pro User Manual
- June 14, 2024
- Cisco
Table of Contents
Cisco Room Bar Pro
Installation Guide
0401B2757 Room Bar Pro
What’s in the box
VESA compatibility
Mounting options
- Depending on VESA mount and screen dimensions.
Screen mounting
Use the depth of the screen to determine which way to attach the L-bracket.
Center the mount and tighten the bolts.
You may have more cables.
The socket outlet must be easily accessible after installation.
Make sure the front cover is in place, before turning Room Bar Pro on.
Connector panel
1. Power
2. HDMI out: primary screen
3. HDMI in: content sharing
4. USB 2.0
5. USB-C: passthrough and content sharing
6. Network (Ethernet)| 7. Room Navigator
8. Network (Ethernet PoE)
9. Audio output
10. Audio input
11. Maintenance (micro USB)
12. Factory reset
13. Kensington lock
---|---
Using the privacy cover
Disassembly
More information
Visit these websites to learn more about your device.
| 
---|---
help.webex.com| cs.co/mtrdevice-docs
|
cisco.com/go/room-docs|
cs.co/webexadoption
Information for US and Canada, radio version: To view the FCC and ISED regulatory IDs, open the Control Panel (11) on the Room Navigator, then go to Device settings > Regulatory information.
Wall mounting
Use the distance to the wall to determine which way to attach the L-bracket.
The socket outlet must be easily accessible after installation.
Ttighten the bolts.
You may have more cables.
Make sure the front cover is in place, before turning Room Bar Pro on.
Cisco Systems Inc., Corporate Headquarters, 170 West Tasman Dr., San Jose, CA
95134, USA.
© 2023 Cisco Systems, Inc. All rights reserved.