PUPPY KITTY Doll Automatic Pet Feeder with Wifi User Manual
- June 14, 2024
- PUPPY KITTY
Table of Contents
Automatic Pet Feeder with Wi-Fi
Product Manual
Doll
New Version: With Bluetooth
Warranty
A. Two-year limited warranty, non-transferable.
B. This product is supported by the manufacturer’s limited warranty.
For all information about the warranty and its conditions applicable to this
product, you can contact us 24/7 at Service@puppy-Kitty.shop.
Warning
| 1 | Dispose of all packaging materials properly. |
|---|---|
| 2 | Keep away from children |
| 3 | Do NOT use rechargeable batteries. |
| 4 | Do NOT immerse the base part in water at any time. |
| 5 | Do NOT disassemble the unit other than as instructed in this Manual. |
| 6 | Always unplug when not in use and before cleaning. |
| 7 | Before leaving for extended time, always replace batteries with new ones. |
| 8 | To avoid tripping, always position power cord out of the way of foot |
traffic.
9| Only use attachments recommended or sold by the manufacturer.
Notice
| 1 | Not suitable for wet, canned or moist food. |
|---|---|
| 2 | When using the powerplug and batteries at the same time, batteries get used |
as backup Power.
3| Working temperature: -10°C to 40°C.
4| suitable for dry food only, with size ranging from 2-12 mm in diameter.
Package Contents
1x Puppy Kitty Pet Feeder
1x User Manual
2x Food Tray
5x Quick Connect Guide
1x 5V Power Adapter & Cord
Product Parameter
| APP Name: | Smart Life |
|---|---|
| APP installation requirement: | Android 5.0/10S 7.0 or above |
| Product Size: | 33×21.5×19.5cm |
| Net weight: | 1.88 KG |
| Capacity: | 4L |
| Product Materials: | ABS |
| Wi-Fi Band: | 2.4 Ghz |
| Adapter Parameters: | Input:110-220V,50/60HZ,0.4A Output:5.0V,1000mA |
| Power: | DC 5V power adapter; 3x alkaline D batteries(not included) |
Product Overview
Startup
1.Assemble the Food Tray
- Install the food tank into the base.
- Put the removable stainless steel bowl into the food tray,and install the food tray into base.
Note:
- Please empty and remove the tray before moving the feeder.
- Hold the base instead of any other parts when lifting the feeder.
2.Placing Desiccant Bag
Open the food tank lid and put the desiccant bag (1 Included) into the
desiccant carrier.
Note:
- Recommend to use and replace the desiccant bag once every half month.
- Please remove the desiccant bag before cleaning the food tank lid.
3.Connecting Power
- Insert the 5V power adapter into a wall socket. Plug in the power socket of the feeder and the LCD screen will light up.
- Open the battery compartment at the bottom of the unit, and install 3 allkaline D batteries (not included) in case of outage
Note.
-
Battery NOTincludes.
-
Before connecting to power, make sure all parts are clean and completely dry.
-
The battery should power with an output of 4-5V; the battery level icon on the display blinks on a low battery level(<4V).
-
Change the batteries every 6 months if not in use for a long time.
-
Recommend using both battery and adapter in case any of power cut off.
4. Fill Food Tank
- Fill food tank with dry pet food. Close the lid and it will snap into place due to gravity.
Note:
- Do not use canned, wet or moist pet food.
- Recommend kibble size ranging from 2-12mm/0.07-0.48in in diameter.
Details
Buttons
| Press and hold the button. After the beep, call your dog or cat, then
release the button.
A double beep occurs after successful recording
---|---
| 1.Click once to serve 1 portion of food.
2Hold the Button for 6 seconds to lock or unlock the device.
| Pressing and holding the button resets the device to the factory settings
after the beep.
LED Indicators
| Blue Light | Quick blinking | The device is looking for your phone |
|---|---|---|
| Continously On | Connected to the network | |
| 3 Second Blinking | Booting up | |
| Red Light | Blinks when the food gear is blocked |
on for 6 seconds when switching between AP and WIFI mode
Flashes twice when you are locking or unlocking the pet feeder
Connecting to the feeder
Please use the quick start guide to establish the connection.
Control the feeder via app
Maintenance
- Please clean the feeder once a month.
- Food container, food tray, and the lid can be cleaned with water.
Troubleshooting
| Problems | Solutions |
|---|
The food
does not come out| Dry food size should range from 2-12 mm diameter.
Check the chute and food outlet for foreign objects.
Check whether battery power is low.
The feeder does not respond| Check that the power cable is properly plugged
into the device and power plug.
Check that the batteries are inserted correctly and are not dead.
2.4 Ghz Network configuration issues| If it is a dual-frequency router, please
access the router and turn off the 5 Ghz Wi-Fi signal.
Save and restart the router, and then reconfigure the feeder.
5G WLAN is not supported, Bluetooth must be enabled and the APP password must
not contain special characters (!”#@§$% &/()=?…).
Pet feeder is frequently offline| Restart the router and feeder.
Put the pet feeder within 10m of the router.
Please update to the latest version of the APR
Change the routers IP address to: 192.168.1.1 or 192.168.0.1
For further questions
If problems persist, contact us 24/7 at Service@puppykitty.shop.
Email
Service@puppykitty.shop