amazon basics BRO17427 Rotating Punching Pliers Set For Leather Instruction Manual

: June 14, 2024
: amazon basics

Table of Contents

IMPORTANT SAFEGUARDS
Before First Use
Intended Use
Operation
Cleaning and Maintenance
Disposal
Specifications
Feedback and Help
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

amazon basics BRO17427 Rotating Punching Pliers Set For Leather Instruction Manual

IMPORTANT SAFEGUARDS

Note Icon Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

When using the product, basic safety precautions should always be followed to reduce the risk of injury including the following:

CAUTION Risk of injury!
Always wear impact-resistant eye protection to prevent serious eye injury from flying debris when operating this product.

This product is shipped fully assembled. Before use verify that all the components and hardware are secure.
Do not use this product if any parts are missing, damaged, or worn.
Do not let children play with the product.
Regularly examine the product for wear and tear. Stop using the product at first sign of damage or if parts become detached.

Before First Use

heck the product for transport damages.
Remove all the packing materials.

DANGER Risk of suffocation!
Keep any packaging materials away from children – these materials are a potential source of danger, e.g. suffocation.

Intended Use

This product is intended for punching holes on belts and straps. It can accommodate straps up to 1.02″ (26 mm) wide.
This product is intended for household use only. It is not intended for commercial use.
This product is intended to be used in dry indoor areas only.
No liability will be accepted for damages resulting from improper use or non-compliance with these instructions.

Operation

Press and hold the handles together to unlock the product.
Operation

Rotate the front wheel counter-clockwise to the desired gauge at the hole punching tip. The tip clicks into place. To add new holes that are the same size as the original ones, find the hole punching tip that matches the original holes
Operation

CAUTION Risk of injury!
Do not place body parts near the hole punching tip or the moving joints to avoid pinching.

Align the hole punching tip to the material that needs to be punched. Press the handles together to punch a hole.
Operation

After use, push the latch forward, then press and hold the handles together.
Operation

Still pushing the latch forward, lightly release the handles. The latch should get caught right into the gap.
Operation

Cleaning and Maintenance

Cleaning

To clean the product, wipe with a soft, slightly moist cloth.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the product.

Maintenance

Check the components regularly to make sure all screws and bolts are tightened.
Use only lubricants recommended by the manufacturer.
Store in a cool and dry place away from children and pets, ideally in original packaging.
Avoid any vibrations and shocks.

Disposal

Disposal icon Dispose of the product according to local regulations. If in doubt, consult your local authorities.

Specifications

Net weight:
approx. 0.6 lbs (260 g)
Dimensions (W x H x D):
approx. 8.8 x 3.4 x 0.5″ (22.5 x 8.7 x 1.4 cm)
Suitable materials:
Leather or other desired soft materials
Hole gauges:
3/32″ (2.5 mm)
1/8″ (3 mm)
9/64″ (3.5 mm)
5/32″ (4 mm)
11/64″ (4.5 mm)
3/16″ (5 mm)