Oasser FC810 Electric Air Compressor Instruction Manual

Oasser FC810 Electric Air Compressor

Precautions For Use

1. Keep away from heat sources such as naked flame.

2. The product will not work, if the real-time tire pressure is greater than the preset tire pressure.

3. Before plugging the DC power supply in the car, please remember to start the car engine first; Please keep the engine on until the tire inflation is finished.

4. Due to the high pressure pumping of the compressor, it will generate heat during the pumping process, please prevent scalding. It is recommended to turn off the product and let it cool for 5 to 10 minutes every 15 minutes of use to prolong the lifespan. Otherwise, it may cause damage to the product.

5. Long periods of inactivity of the product may reduce the effectiveness of the battery.
   Please charge the air pump at least every 3 months to maintain the battery performance

6. If the product makes unusual noises or gets too hot during inflation, please turn off the product immediately.

7. Before setting the inflation pressure value, please ensure that the pressure unit is correctly selected. Otherwise, it may cause the danger of over-inflation.

8. Please use a certified 5V/2A adapter and included charging cable to charge.

9. Please do not overinflate to avoid damage to items that cannot preset the tire pressure values due to low air pressure, such as balloons, toy balls, swimming rings, etc.

Technical Specification

Product Details

1. Battery level indicator
2. 4 shortcut modes
3. Real-time pressure value display
4. Pressure units
5. Preset pressure value

1. LED digital pressure display
2. Battery level indicator
3. Power switch/Air pump startup button
4. LED lighting switch
5. Shortcut modes switch
6. Button + (increase value)
7. Button – (decrease value)
8. Type-C charging input
9. USB output
10. 12V DC interface
11. Trachea interface
12. LED light
13. Trachea
14. Type-C charging cable
15. Ball pin
16. Inflatable toy conversion mouth x2
17. Bicycle French conversion mouth
18. 12V DC cigarette lighter wire

Function Introductions

1. Turn On/Off: long press for 3 seconds to turn on (or turn off) the product. After completing the preset pressure setting, short press to start the air pump. When the set value is reached, it will automatically stop pumping.

2. Night Lighting: short press to turn on the light. Press again to switch the lighting mode. There are 3 lighting modes: long bright / flash / SOS

3. Shortcut Modes: short press to switch shortcut modes. There are 4 shortcut modes: car/motorcycle/bicycle/ball/custom.

4. Pressure Units Switch: After selecting the mode, long press and then short press to switch units when the units blink. There are 4 pressure units: PSI, BAR, KPA, KG/CM?.

5. Preset Pressure Value: The preset pressure values in the 4 shortcut modes can be changed, and memory function is also available. After selecting the mode, short press + / – to preset the tire pressure, long press + / – to rapidly increase or decrease. After selecting the pressure value, it will blink 3 times and then stop blinking.
   Preset pressure value setting is complete.

6. View Current Voltage: Press + – at the same time to display the current battery voltage.

7. USB Output: The maximum output is 5V-2A. It can be used as a mobile power supply for emergency charging of mobile phones.

8. 12V DC Cigarette Lighter Power Input Mode: Connect the car charger cable to the car cigarette lighter, start the car engine, and then turn on the air pump. Only for 12V cigarette lighter, not for 24V cigarette lighter.

9. Charging Duration: Support Type-C charging input (A certified charger of 5V-2A or above can charge the product). The charging time is related to the battery capacity, the charging cable and the input current of the power adapter (about 3-5 hours). During charging, the battery level indicator will cycle flashing according to the corresponding voltage of each bars of battery power. The battery power bars will be all displayed until it is charged to 12.5V above, and stop flashing. Only the battery level indicator is displayed when charging in the off state. Do not pump up when charging.

10. Over-temperature Protection: Once the temperature of the cylinder reaches 120°C, the display screen will show “E02”, and the product will automatically stop pumping.

NOTE:
When the battery voltage is lower than 9V in the no-load state, “LO” is displayed when you press the startup button, and then the air compressor will automatically turn off.
After charging the air compressor, it can continue to work.

How to Use?

1. Please connect one end of the trachea to the inflator.
2. Be mete the dust cap on the tire valve, and rotate the air pipe clockwise to the valve core of the tire.

Notes:
Please make sure the air pump is fully charged before use, and charge the tire air pump for 3-5 hours before using it for the first time.

1. Remove the bonnet and connect

2. Press and hold the power button to turn on

3. Select preset mode and preset pressure

4. Press power button to start working

5. Stop inflation
   When the preset pressure value is reached, the air pump will automatically stop pumping. Please remove the trachea and other parts in sequence. (Note: the surface of the trachea will be hot, please be careful when disassembling)

6. Turn off the air pump
   Long press the power switch ( ) to shut down.

Note: The device will automatically shut down after 180 seconds of inactivity.

Note (no-load protection) :
In order to prevent the tire from leaking during the inflation process, the following two situations are overtime protection,

1. If the air pressure is 0.0 and does not increase, it will automatically shut down in 90 seconds.
2. If the air pressure does not increase within 2 minutes, the machine will stop pumping and display “tO” and return to air pressure mode after “tO” flashes 3 times.

If you don’t know the tire pressure you want, please refer to the chart below to find the pressure you want.

The recommended tire pressure is usually written on a sticker inside the door. If not, you can usually find the specs in the owner’s manual.

Troubleshooting

Lack of power

| Check whether the connection between the air tube and the inflator pump is well connected.

Fully charge the air pump and try again.

Can’t inflate

Product not working

| Lack of power

The current air pressure value is higher than the preset air pressure value

| Fully charge the air pump and try again.

Please select the appropriate inflation mode

Unable to preset the air pressure value| The preset air pressure is not within the air pressure range of the current inflation mode| Please switch the appropriate inflation mode to try
The air pressure value reads “O”| Items with low air pressure cannot reach the minimum air pressure that this product can read|
The battery indicator does not light up when charging| Charger or charging cable does not match| Please choose a suitable adapter and charging cable

Safety Precautions

1. Children are prohibited from using this air pump! Keep it in a safe place out of the reach of children! Never insert air tubes into the mouths, ears or eyes of people or animals to inflate, and do not use the air pump as a toy! Keep children a safe distance from the pump when inflating.
2. This product has a built-in battery, do not put the product in fire or reverse the battery.
3. Overheating, damage or water spray may increase the risk of fire or explosion, it is best to keep the product away from the heat source. Do not leave it for a long time, if the air pump becomes very hot, it may explode.
4. Please store the product in a temperature range of -10 degrees to -45 degrees. Extreme hot or cold conditions may damage the battery and shorten the service life of the pump.
5. It is forbidden to use this air pump near flammable and explosive liquids and gases (such as gas stations)!
6. The product should be careful to avoid rain and water intrusion, beating and impact.
7. If the air pump is not used for a long time, it must be stored in a dry place.
8. During the use of the product, if you find any abnormal noise or abnormality, please stop using it immediately and contact our after-sales technical team.
9. For the safety of you and others, please use the air pump and its accessories according to the instructions provided by the manufacturer. Use methods not mentioned in the manual may be dangerous.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>