LG AN-VC22PR Smart Camera Pro User Manual

June 14, 2024
LG

OWNER’S MANUAL
LG Smart Cam Pro

Please read this manual carefully before operating your set and retain it for future reference.
Network Webcam
AN-VC22PR

SAFETY  PRECAUTIONS

For safe use, read the following precautions and use the product as instructed.
WARNING
Indicates a case where serious injury or death may occur if the warnings are violated.
CAUTION
Indicates a case where minor injury or product damage may occur if the precautions are violated.
CAUTION
This product is for indoor use only.

Precautions for Moving the Product

WARNING

  • Make sure the product is turned off, unplugged, and all cables have been removed before the product is moved.
    – You may be electrocuted or the product can be damaged.

  • Do not drop or cause an impact on the product.
    – Product can be damaged.

Precautions for Use

CAUTION
If you install the product in a place that does not meet the recommended conditions, this may cause serious damage to the life cycle, and appearance. Please do not install the product in places such as where there is an abundance used, exposed to direct sunlight, the tempera- ture is very high or low, the humidity is very high.

  • Do not take the product apart arbitrarily. If you suspect a product failure, contact your dealer to have the product repaired. If the product is taken apart arbitrarily, it will not be covered by the warranty.

  • Do not apply excessive force to the button, or use a pointed tool to press it. Doing so may damage the button.

  • If the product plays an unknown sound or emits a strange smell or smoke, disconnect the powercord immediately and contact the service center.

  • Do not moving when the product is in use.

  • Do not allow an impact shock, any objects to fall into the product.

  • Do not press strongly upon the button or lens with a hand or a sharp object such as a nail, pencil, or pen, ormake a scratch on it. It may cause damage to product.

  • If a camera noise occurs, It can be improved by  adjusting the picture mode  of theconnected display.

  • When using the product as a security device, please connect it to the UPS.

  • Recommended HDMI cable types (3 m (9.84 ft) or less)
    Ultra High Speed HDMI/™ cablel

  • How to use ferrite core
    Use the ferrite core to reduce the electromag- netic interference in the power cord. wind the power cord on the ferrite core once. LG AN-VC22PR Smart
Camera Pro - Fig 1

Risk Group 1
  WARNING IR emitted from this Product. Do not stare at operating lamp.
Product tested against fE C624 77

Precautions for Cleaning the Product

CAUTION

  • When cleaning the product, unplug the power cord and wipe it gently with a soft cloth. Do not spray water or other liquids directly on the product. Especially, do not clean your product with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol, etc., which can damage the product or its panel.
    – product damage (deformation, corrosion or breakage).

Precautions for Storage

CAUTION

  • When not in use, turn off the power of the device before storing.
  • If not in use for a prolonged period of time, completely disconnect the adapter and store it.
  • Avoid direct light (sunlight, electric light, etc.), and store it in a dry location at room temperature.
  • Store away from places vulnerable to fire, such as areas where chemicals and gas are generated.

Disposal Method

CAUTION
Do not dispose of the product arbitrarily, but follow your local disposal procedures.

BROWSING OUR PRODUCTS
Due to the version changes of the product after this user manual was published, the illustrations and screenshots in the manual may differ from the screens of the actual product and software.
The information provided in this user manual is subject to change without notice.

Product Composition

LG AN-VC22PR Smart Camera Pro - Product Composition

Recommendations when using Cable Management

1 Adapter
2,7 HDMI
3 LAN
4,5 RS-232C
6 MPI
8 USB C-type

Attaching the Cable Man- agement

  1. Remove the protection paper from the adhesive side of the tpae and attach to the back of the Cable Management as shownLG AN-VC22PR Smart Camera Pro - Attaching the Cable
  2. After removing the other side protection paper from the tape. stick Cable Management to the TV.LG AN-VC22PR Smart Camera Pro - Attaching the Cable 1

Kensington Lock

Connect the Kensington security system cable between the monitor and product.LG AN-VC22PR Smart Camera Pro - Kensington
Lock

NOTE

  • The Kensington lock device is an optional specifications.
  • This is a general illustration of installation and may look different from the product held by the customer.

Name of Individual Parts

Images may differ depending on the model.LG AN-VC22PR Smart Camera Pro -
Name of Individual Parts

  1. Microphone (x4)
  2. Speaker (1.3W)
  • For playing call or alram tones. 3. LED 4. 12MP wide RGB camera 5. Status LED (3 color LED) 6. IR Remote 7. ALS Sensor 8. 12MP NV Camera 9. IR LED (x4) 10. Button

INSTALLING THE PRODUCT

Set Holding

LG AN-VC22PR Smart Camera Pro - Set HoldingLG AN-
VC22PR Smart Camera Pro - Set Holding 1

On The Monitor

  • Right angle gender applied structure
  • Make sure the product does not interfere to the  other cable when installing it.
    1 Unfold the hinge and mount and secure it to the top of the set.LG AN-
VC22PR Smart Camera Pro - On The Monitor

Stand

  • Floor mounting with hinged structure standLG AN-VC22PR Smart Camera Pro - Stand

Accessory Connection

  • When fixing with accessories, use the Bottom Tap Hole.
  • Tap Hole: M6, Depth 5.0 (Max)

Bottom Side

LG AN-VC22PR Smart Camera Pro - Accessory Connection

CONNECTING

LG AN-VC22PR Smart Camera Pro - CONNECTING

Name Connection and Communication Method
1 DC IN Power supply by connecting adapter DC PLUG
2 Hdmi OUT Connect to TV.
3 LAN The Ethernet communication indicator LED using TCP/IP does not light

up.
RS-232cp|
5 MPI|
6 HDMI IN| Connect to TV STB.
7 (USB Type-c 3.1)| For connecting USB devices for use in Pro: Centric Application.

  • Compatiable model
    – USB Camera: AVer MD330UI
    – USB Speaker/MIC: JABRA SPEAK 710

PRODUCT SPECIFICATIONS

The product specifications below are subject to change without t notice in order to improve product functions.LG AN-VC22PR Smart Camera Pro - PRODUCT
SPECIFICATION * Unit: mm (inches)

Model W W1 D D1 H H1 L Weight
LG Smart Cam Pr(AN-VC22PR) 167
(6.5) 153.1
(6.0) 44.3
(1.7) 52.3
(2.0) 13.5
(0.5) 22.3
(0.8) 20
(0.7) 330 g

(0.7 lbs)
Operating Temperature| Product installation height
---|---
-5 °C to 45 °C (23 °F to 113 °F)

  • Recommendation 25 °C (77 °F)| 2 m (78.7 inches) or less
    HW

    Processor| Qualcomm QCS7230
    RAM| 6 GB
    SSD| 64 GB
    Camera| Built-in 12MP (F2.2 / 120° / 1.4um) (4K Camera, 4x Digital Zoom), Night Vision
    Speaker| 0
    WiFi| 0
    Ethernet| 0
    USB| Type-C 3.1
    Power (Rated Voltage)| 12 V 2.5 A
    SW
    OS| WebOS OSE

Wireless LAN (IEEE 802.11b/g/n)
Frequency Range (MHz)
2400 ~ 2483.5
Wireless LAN (IEEE 802.11a/n/ac)
Frequency Range (MHz)
5180 ~ 5825
LICENSE
Supported licenses may differ by model. For morinformation on the license, please visit www.lg.com.

REGULATORY
WARNING: Cancer and Reproductive Harm
www.p65warnings.ca.gov.

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Industry Canada
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

The model and serial number of the product are located on the back and on one side of the product. Record them below in case you ever need service.

MODEL………………………………………
SERIAL NO…………………………………
www.lg.com
Copyright © 2022 LG Electronics Inc. All Rights Reserved.
Printed in MalaysiaLG AN-VC22PR Smart Camera Pro - Bar
Code

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals