ARMATURA EP30CF All weather Outdoor Biometric Multi tech Smart Reader User Guide

June 14, 2024
ARMATURA

ARMATURA EP30CF All weather Outdoor Biometric Multi tech Smart Reader

Explorer Series

Model: EP30CF / 32CF
All Weather Outdoor Biometric Multi-tech Smart Reader

Quick Start Guide
Version 1.0 www.armatura.us

The EP30CF series reader is one of the most versatile biometric (fingerprint)

  • card readers available that supports fingerprint and over 100 RFID card types and both NFC and Bluetooth Low Energy credentials.

Parts Included
Make sure your box contains everything listed. If any pieces are missing, contact your distributor, Please save the original box and packing materials for return shipping in case of any issues.

  • Explorer Series – EP30CF/32CF Reader (1pc)
  • Quick Start Guide (1pc) and Mounting Template (1рс)
  • Screwdriver (1pc)
  • Phillips head screws (4pcs) and Anchors (4pcs) for mounting directly to a wall (no junction box)
  • H0.9 Hex Wrench (1pc)
  • Inner-hexagon screw (4pcs) – for securing the front plate reader

Recommended Parts (not supplied)

  • Cable 4 conductor Twisted Pair Over-All Shield and UL approved, Belden 3107A or equivalent (OSDP)
  • Certified LPS DC power supply
  • Metal or plastic junction box * Drill with various bits for mounting hardware
  • Mounting hardware

Product Overview

ЕРЗОСЕ Construction: Embedded Wall Mounting

ARMATURA-EP30CF-All-weather-Outdoor-Biometric-Multi-tech-Smart-Reader-
\(1\) EP32CARMATURA-
EP30CF-All-weather-Outdoor-Biometric-Multi-tech-Smart-Reader-
\(2\)

  1. LED Indicator
  2. Card Reading Area
  3. Fingerprint Reader
  4. Speaker
  5. Terminal Block
  6. Waterproof Rubber Ring

Reader Connection
The EP30CF series can communicate with the control panel via RS-485 (OSD) .

Pigtail Description
Red +9~24V DC
Black Ground
Red/Green RS-485 A
Brown RS-485 B
Bare I
Green
White
Orange
Pink
Yellow
Violet

Connection via RS-485 (OSDP)

ARMATURA-EP30CF-All-weather-Outdoor-Biometric-Multi-tech-Smart-Reader-
\(3\)

Using And Testing The Reader ARMATURA-EP30CF-All-weather-Outdoor-
Biometric-Multi-tech-Smart-Reader- \(4\)

Frequency Bands And Maximum Output Power

Frequency bands Maximum output power
2402MHz – 2480MHz 6.21dBm
125kHz -24.02dBuA/m@10m
13.56MHz 2.77dBuA/m@10m

Certificate Information

ARMATURA LLC

Copyright © 2022 ARMATURA LLC.
All rights reserved.

FCC+CE

“Hereby, Armatura LLC declares that this Product is in compliance with the essential requirements and other relevant provisions of Directive 2014/ 53/EU.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with

Supplier’s Declaration of Conformity

  • Unique Identifier
  • Trade Name : Smart Reader
  • Model No.: EP30CF
  • Responsible Party- U.S. Contact Information

US Company Name: Armatura LLC
Address: 190 Bluegrass Valley Parkway Alpharetta, GA 3005, USA Internet contact information: www.armatura.us the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

‘This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals