amazon basics B08P4HVCLZ Kids Upright Play Kitchen Set Instruction Manual

: June 14, 2024
: amazon basics

amazon basics B08P4HVCLZ Kids Upright Play Kitchen Set

amazon basics B08P4HVCLZ Kids Upright Play Kitchen Set

Tools

Package Content

Important Safeguards

Read these instructions carefully and retain them for future use. If this toy is passed to a third party, then these instructions must be included.
When using the toy, basic safety precautions should always be followed to reduce the risk of injury including the following:

Risk of injury!
Not suitable for children under 36 months. Small parts.
Choking hazard.

CAUTION!

Unassembled state contains potentially hazardous parts, sharp edges and sharp points.
To be assembled by an adult.
Keep children and pets away while assembling the toy.
Always use the toy on a firm, level ground.
Do not use this toy if any parts are missing, damaged, or worn.
Do not sit or stand on the toy.
Do not over-tighten the fasteners.
Regularly examine the toy for wear and tear. Stop using the toy at first sign of damage or if parts become detached.
The toy shall be periodically examined for potential hazards.
Any potentially hazardous parts shall be repaired or replaced.
Ensure that the toy functions properly before use. Replace batteries when needed.

Battery Warnings

Risk of explosion!
Risk of explosion if the battery is replaced by an incorrect type.

When used correctly, primary batteries provide a safe and dependable source of portable power. However, misuse or abuse may result in leakage, fire, or rupture.
Always take care to install your batteries correctly observing the “+” and “-” marks on the battery and the toy. Batteries that are incorrectly placed into some equipment may be short-circuited, or charged. This can result in a rapid temperature rise causing venting, leakage, rupture and personal injury.
Always replace the whole set of batteries at one time, taking care not to mix old and new ones or batteries of different types. When batteries of different brand or type are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference of voltage or capacity. This can result in venting, leakage, and rupture and may cause personal injury.
Store unused batteries in their original packaging and away from metal objects. Unpacked batteries could be jumbled or get mixed with metal objects. This can cause battery short-circuiting which may result in venting, leakage and rupture and personal injury; one of the best ways to avoid this happening is to store unused batteries in their original packaging.
Remove discharged batteries from toy promptly to avoid possible damage from leakage. When discharged batteries are kept in the toy for a long time, electrolyte leakage may occur causing damage to the toy and/or personal injury.
Never dispose of batteries in fire. When batteries are disposed of in fire, the heat build-up may cause rupture and personal injury. Do not incinerate batteries except for approved disposal in a controlled incinerator.
Never attempt to recharge primary batteries. Attempting to charge a non-rechargeable (primary) battery may cause internal gas and/or heat generation resulting in venting, leakage, rupture and personal injury.
Never short circuit batteries as this may lead to high temperatures, leakage, or rupture. When the positive(+) and negative (-) terminals of a battery are in electrical contact with each other, the battery becomes short-circuited. This may result in venting, leakage, rupture and personal injury.
Never heat batteries in order to revive them. When a battery is exposed to heat, venting, leakage and rupture may occur and cause personal injury.
Remember to switch off the toy after use. A battery that has been partially or completely exhausted may be more prone to leak than one that is unused.
Never attempt to disassemble, crush, puncture or open batteries. Such abuse may result in venting, leakage, and rupture, and cause personal injury.
Keep batteries out of the reach of children, especially small batteries that could be easily ingested.
Immediately seek medical attention if a cell or battery has been swallowed. Also, contact your local poison control center.
Always purchase the correct size and grade of battery most suitable for the intended use.
Clean the battery contacts and also those of the device prior to battery installation.
Ensure the batteries are installed correctly with regard to polarity(+ and -).
Remove batteries from the toy that is not to be used for an extended period of time. Remove used batteries promptly.

Symbols Explanation

This symbol stands for “Conformite Europeenne”, which declares “Conformity with EU directives, regulations and applicable standards”. With the CE- marking, the manufacturer confirms that this product complies with applicable European directives and regulation.
This symbol stands for “United Kingdom Conformity Assessed”. With the UKCA- marking, the manufacturer confirms that this product complies with applicable regulations and standards within Great Britain.

Before First Use

Risk of suffocation!

Keep any packaging materials away from children and pets – these materials are a potential source of danger, e.g. suffocation.
Remove all the packing materials.
Remove and review all components before starting assembly.
Check the toy for transport damages.

Cleaning, Storage and Maintenance

To clean the toy, wipe with a soft, slightly moist cloth.
Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the toy.
Regularly check that all the components and fasteners are tightened.
Remove the batteries before storage. Store the toy in a cool and dry place.

FCC – Supplier’s Declaration of Conformity

Unique Identifier| B08P4HVCLZ – AmazonBasics Kids Upright Play Kitchen Set, Espresso B08P4HB3CY- AmazonBasics Kids Upright Play Kitchen Set, White & Grey
---|---
Responsible Party| Amazon.com Services LLC.
U.S. Contact Information| 410 Terry Ave N. Seattle, WA 98109 USA
Telephone Number| 206-266-1000

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

Canada IC Notice

This Class B digital apparatus complies with Canadian CAN ICES-003(B) / NMB-003(B) standard.

Disposal (for Europe only)

The Waste Electrical and Electronic Equipment (WEEE) laws aim to minimise the impact of electrical and electronic goods on the environment and human health, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centres in order to conserve natural resources. Each country should have its collection centres for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local city office, or your household waste disposal service.

Battery Disposal

Do not dispose of used batteries with your household waste. Take them to an appropriate disposal/collection site.
To learn more about recycling batteries, visit: call2recycle.org/what- can-i-recycle

Specifications

Name and address of the manufacturer/importer| Happy Arts & Crafts (Ningbo) Co., Ltd., 9-27 Nanhai Rd., Ningbo, Zhejiang, China, 315800
---|---
Overall voltage/battery type| 9 V ⎓ 4x 1.5 V AAA (LR03) &

2x 1.5 V AA (LR6

Net weight| approx. 42.9 lbs (19.5 kg)
Dimensions (W x H x D)| approx. 38.9 x 11.81 x 37.99″
(98.8 x 30 x 96.5 cm)
Material| MDF, plywood, solid wood, metal, PP, PET

Importer Information

For EU

Postal:| Amazon EU S.a r.l., 38 avenue John F. Kennedy, L-1855 Luxembourg
Business Reg.:| 134248
For UK

Postal:| Amazon EU SARL, UK Branch, 1 Principal Place, Worship St, London EC2A 2FA, United Kingdom
Business Reg.:| BR017427

Feedback and Help

We would love to hear your feedback. To ensure we are providing the best customer experience possible, please consider writing a customer review.
Scan QR Code below with your phone camera or QR reader:
OR

UK: amazon.co.uk/review/review-your-purchases#
If you need help with your Amazon Basics product, please use the website or number below.
US: amazon.com/gp/help/customer/contact- us
UK: amazon.co.uk/gp/help/customer/contact- us
+1 877-485-0385 (US Phone Number)

Assembly

The barrel nuts have been properly aligned at the factory to allow the screws to fit. If any barrel nuts have loosened or shifted during shipping, use a flat-head screwdriver to push it back in and realign it.

The magnetic catches are pre-assembled to the door panels. Ensure that the screws on the magnetic catches are tightened in order to keep the doors held in place once closed.

Assembly