Optoma ZW350 QSG Laser Projector User Guide

June 4, 2024
Optoma

Optoma ZW350 QSG Laser Projector

Optoma-ZW350-QSG-Laser-Projector-PRODUCT

For access to the setup information, user manual, and product updates please scan the QR Code or visit the following URL: https://www.optoma.com/supportdownload

Note:

INSTALLATION

Optoma-ZW350-QSG-Laser-Projector-FIG-1

Safety information

  • Before operating the projector, it is essetial to read the full safety information in the user manual.
  • Do not look into the projector lens during operation. The bright light may harm your eyes.
  • Do not block projector inlet or outlet air vents. Do not place the projector on an unstable surface as it may damage the projector or injure the personnel.
  • Only use attachments/accessories specified by the manufacturer.
  • Do not let objects or liquids enter the projector as it may cause the fire or electric shock.
  • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Make sure that the operating environment meets the requirements in the user manual
  • Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.
  • Please do not open or disassemble the projector as this may cause electric shock. The unit should only be repaired by authorized service personnel.
  • Turn off the projector and unplug the power cord before you maintain, install the projector.
  • Remove battery/batteries from remote control before storage. If the battery/batteries are left in the remote for long periods, they may leak.
  • Use a power strip and or surge protector. As power outages and brown-outs can KILL devices.

Note:

Address:
Optoma Technology, Inc 47697 Westinghouse Drive Fremont, CA 94539 USA

Telephone:
510-897-8600 1-888-289-6786 (6am – 5pm PST)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Optoma User Manuals

Related Manuals