LG KSTK4 Laundry Stacking Kit Instruction Manual
- June 15, 2024
- LG
Table of Contents
STACKING KIT
INSTALLATION INSTRUCTIONS (2P)
Please read these installation instructions carefully.
And retain them for future reference.
Stacking Kit Installation Instructions
To ensure safe and secure installation, please observe the instructions below.
WARNING
Do not attempt installation with one person.
Incorrect installation procedure can cause serious accidents and physical
injuries.
The weight of the dryer and the height of installation makes the stacking
procedure too risky for one person. This procedure should be performed by 2 or
more experienced service personnel.
-
Place washer firmly on a stable, even and solid floor as product installation instructions describe in owner’s manual.
-
Peel protective paper off the tape from the stacking kit side bracket.
-
Fit the stacking kit side bracket firmly to the side of the washer top plate, pressing to firmly attach the double-sided tape as shown.
-
Attach the stacking kit side bracket to the washer with a screw on the back of the bracket. Repeat steps 2, 3, 4 for the other side.
-
Before stacking the dryer, screw in the leveling legs all the way.
Place the dryer on top of the washer with the legs positioned as shown. Be careful not to get fingers caught between the two appliances. Slide the dryer slowly backwards until it hits the stoppers on the brackets. -
Insert the front bracket with the flat side facing down. Push the bracket in until the holes at the sides align with the holes on the side brackets.
-
Insert screws on both sides of the front bracket.
• Do not use stacking kit with a gas dryer in potentially unstable conditions like a mobile home.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>