Hisense HVC5101BK Stand Vacuum Cleaner Instruction Manual
- June 15, 2024
- Hisense
Table of Contents
Hisense HVC5101BK Stand Vacuum Cleaner
General precautions
When using the vacuum cleaner always observe the following basic safety precautions: Carefully read this instruction manual and only use the appliance in accordance with the instructions herein. Before using the appliance for the first time, remove all protective film or plastics.
- Never leave the appliance unattended during use.
- Before using the appliance, carefully assemble all of its parts.
- Only use the appliance indoors and in dry areas.
- Only use the appliance with the parts recommended by the manufacturer.
- Do not use the appliance if it has been dropped, if it is damaged, if it has been kept outdoors, or if it has been dropped or immersed in a liquid.
- Regular cleaning can extend the appliance’s useful life.
- Make sure your hair, loose parts of your garments, fingers or other parts of the body do not come into contact with the vents or moving parts of the appliance.
- The appliance complies with all required standards regarding electricity, and radio interference regulations.
- The appliance is not intended to be used by children and persons with impaired physical or mental abilities.
- This appliance may be used by children aged 8 years and more, and by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they are supervised during the use of the appliance or if they have been provided relevant instructions regarding the use of the appliance in a safe way, and they understand the hazards involved.
- Keep children under supervision while they are using the appliance and make sure they do not play with it.
- Children should not perform any cleaning or maintenance tasks on the appliance, unless they are older than 8 years, and they do so under supervision.
- Switch off the appliance after use.
Danger
- Do not immerse the main unit/appliance housing or the charging base in water or any other liquid and do not rinse them under running water.
Special warnings
Before connecting the appliance or the charging base with the power cord to the power mains, make sure the indicated voltage matches the voltage of the power mains in your home.
- Do not used a damaged vacuum cleaner or a damaged charging base (or adapter – depending on your vacuum cleaner model).
- If the charging base (or adapter) is damaged, replace it only with an original spare part in order to avoid danger.
- A transformer is integrated into the adapter. Removal and replacement of adapter with another one are not allowed as this may lead to a dangerous situation.
- only charge the vacuum cleaner with the supplied adapter and charging base. The adapter may heat up during charging. This is a normal occurrence. (Depending on your model, if it has an adapter.)
- Switch off the appliance during charging.
- Never use the vacuum cleaner without filters or filtering unit in place.
- The exhaust vents may not be blocked during vacuum cleaning.
- Only use the appliance for household purposes and indoors.
- Keep the suction vents clean and free in order to ensure optimum and unimpeded suction power of the appliance.
- It is highly recommended to regularly clean the open parts of the suction hose, and to remove dust, hair, or anything else that may block the airflow.
- Before cleaning the support or the charging base, unplug it from the power socket.
- Never use the vacuum cleaner to clean up embers or filings, cigarette butts,matches, liquids (e.g. water, carpet cleaning foam), or sharp or pointed objects (broken glass etc.).
- Keep the suction tube or the open part of the appliance away from your face and body.
- Never use the appliance to vacuum construction material (such as fine sand, lime, cement powder, toner dust etc.). This can cause damage to the appliance.
Problems and solution
Problem | Possible reason | Solution |
---|---|---|
Not working. | The battery is dead. |
The handy VC is not assembled correctly.
| Charge.
Assemble the handy VC correctly.
Suction power has decreased.| The dust cup is full. Block in filter.
Block in the air inlet tunnel or on the roller of electrical brush.
| Pour out the dust. Clean or change filter. Clean the electrical
brush.
The VC is not charging.| The charger is not connected on socket.
The connector of charger is not connected to the hole of base body.
The handy VC is not assembled to the body.
| Connect the charger on socket.
Connect the charger with base body of VC. Assemble the handy VC on body.
Use very short time after charging.| Not enough charging time. The battery is aging.| Charge according to instruction. Change the battery.
Environment
Do not throw away the appliance with the normal household waste at the end of
its life. Hand it in at an official collection point for recycling. By doing
this, you help to preserve the environment. This appliance is marked according
to the European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE). This guideline is the frame of a European-wide validity of
return and recycling on Waste Electrical and Electronic Equipment.
Guarantee & service
If you need information or if you have a problem, please contact the Hisense
Customer Care Centre in your country (the phone number is in the worldwide
guarantee leaflet). If there is no Customer Care Centre in your country, go to
your local Hisense dealer or contact the Service department of Hisense
domestic appliances.
Note: The warranty on the battery of vacuum cleaner is 12 months. For
personal use only!For easier transport, some appliance parts are packed
separately and safely placed in the main packaging unit.
Before first use, read and observe the instructions for assembly and safe use.
Due to its design, the appliance is not free-standing. Therefore, we recommend
safe placement on the charging station. The appliance is intended for
household use, for dry vacuum cleaning with an option for wet mopping of the
floor.
Appliance part
- Housing with motor unit, battery, and dust bin 4 2 × Wet floor cleaning mop
- Handle
- Dispenser tray
- Adapter with power cord 6 Extra filter
Appliance assembly
Assemble the appliance handle and the motor unit. The appliance is correctly
assembled with the appliance is firmly attached all the way to the grooves.
When the appliance is stored or during charging, it should be kept at least 1
m away from the closest heat source. Due to its design, the appliance is not
free-standing.
Using and operating the appliance
The appliance can be used as an upright vacuum cleaner that also allows wet
mopping of the floor. The two functions can also be used separately. When you
are only vacuum cleaning and not using the mopping function, we recommend
removing the mopping pad from the bottom of the brush, To open the clean water
tank, proceed as displayed in the figure. Fill the water tank with tap water
(room temperature) up to the max. marking indicating the maximum allowed
amount. Do not exceed the max. marking to prevent spilling. Close the lid.
- The on/off button is located on the front part of the handle. Use the button on the back side of the handle to control the amount of water sprayed on the floor. You may wet the floor as desired or necessary.
- The appliance does not allow wet vacuum cleaning; therefore, be careful not the wet the floor excessively.
- To spray water onto the floor, press the button on the back side of the handle. The appliance sprays water through a nozzle on the front side, above the brush
- The display unit on the front side indicates the following:
- The appliance has a digital battery charge indicator. It indicates the current battery charge during use or during the charging process. Vacuum cleaning indicator Mopping indicator
Charging the appliance
Attach the charging adapter with the power cord to the back side of the vacuum
cleaner. The adapter/charger has a magnetic insert for easier connection and
charging.
The appliance cannot be powered on during charging.
Cleaning the appliance
- Before each use, make sure the appliance is clean and that the dust bin and filter are always clean; only this way can you ensure a long useful life.
- The dust bin is located on the top part of the brush.
- To remove the dust bin, grab the elevated middle part and simply lift it.
- Also, remove the mopping pad attached to the bottom of the brush by means of a hook-and-loop fastener.
- The pad can be reused and is machine washable at up to 40 °C. We advise against machine drying, as excessive temperature may result in deformation.
- When you remove the dust bin from the brush, press the button to open the dust bin and empty it.
- The bin may be washed, but it must be thoroughly dried before it is replaced.
- Remove the dust filter as shown in the figure, and shake it gently. You may also gently wash it, but without any aggressive handling, as it can be easily damaged. If the filter is damaged, replace it since incorrect use could result in damage to the motor unit. For optimum use, we recommend replacing the filter every 6 months.
- When all parts are clean, reassemble the appliance.
ENVIRONMENT
Do not disassemble or open the appliance yourself unnecessarily. Before
discarding the appliance, make sure the battery is completely empty. After the
expiry of the appliance’s useful life, do not discard it with common household
waste. Rather, take it to an authorized recycling centre. This will help
preserve the environment.
Product name: | Vacuum cleaner with floor mopping option |
---|---|
Appliance nominal voltage: | DC 10.8 V / 2000 mAh / lithium-ion batteries |
Appliance nominal power: | 85W |
Adapter voltage: | 18 VDC: 500 mA |
Clean water tank capacity: | 400 ml |
Dust bin capacity: | 300 ml |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>