AOEDI AD920 Wireless FM Transmitter User Manual

AOEDI AD920 Wireless FM Transmitter

Product Structure

1. l.S4 Inch TFT Touch Screen
   U Disk Socket (Maximum Support 64G)/

2. USB-A Charging Port (SV/lA)

3. USB-C PD 20W Fast Charging Port

4.  Microphone Port

5.  TF Card Slot
   (Maximum Support 64G TF Micro SD Card)

Specifications

Power On/Off
Home Page Description

Instruction of FM Tuning/Bluetooth Connection
Important note: When you use the CZ653 for the first time, please adjust its blank FM frequency to be the same as that of your car (Not a frequency of local broadcast/ frequency where the broadcast cannot be heard). For seeking a better sound enjoyment, please make sure that the blank FM frequencies of CZ653 and your car are the same every time you use the product(Not a frequency of local broadcasn

1. Adjust your cars FM radio to a blank frequency( an empty frequency without any broardcast), eg. FM88.8.

2. On the home page, touch the screen and swipe up to the “FM Adjustment” pae:
   There are 2 methods to tune FM frequency:

3.  Quick Tuning:

4. recise Tuning:
   When you adjust the FM frequency to be the same as that of your car( eg. FM 88.8), please click the frequency digital to confirm. it will automatically returns to the home page: Or automatically confirm the current FM frequency and return to the home page after no operation for Ss.

5. Bluetooth Connection: Enable the Bluetooth function on your smart devices, and search
   ” CZ653″ and connect it. You can use it after successfully connection. When you use CZ653 again, it’ll reconnect the last connected device automatically .

6. fter successfully Bluetooth connection, please appropriately turn up the volume of your device.

Hands Free Function

Music Play Function( Please ensure the FM pairing is successful before using this function)

Play Mode Switch
Slide the page up and down to ‘Way of music”, slide left and right to select “U disk El” or “TF card !:ll’J” or “Bluetooth * ” mode, click the mode icon to confirm the playback mode and it will automatically return to the home page; or no operation for Ss, the current selection will be automatically confirmed and return to the home page.

Play Mode

1. Bluetooth Mode: After your smart devices( eg.Phone) is connected to the device’s Bluetooth successfully, if you play music on your device, the music will be synchronized to your car speaker via FM connection. The first use defaults to the Bluetooth mode.
   Note: If it is detected the bluetooth is not connected, the on the home page will flash, and the will be light up when bluetooth is connected.

2. Disk Volume adjustment Mode: You should first insert the U disk into the U disk socket, and then select the “U disk” mode to automatically play the music in the U disk.

3. TF Card Mode: Insert the TF card into the TF card slot first, and then select “TF card” mode to automatically play the music in the TF card.

Music Playing Operation  ( Play music on the home page)

Volume Setting

1. Volume defaults to 30.
2. Slide the page up and down to the ‘Volume” page, there are 2 methods to adjust the volume.
3. Quick adjustment: Touch and slide to the right to increase the volume, and touch and slide to the left to decrease the volume.
4. Precise adjustment: Click “+” or “-” to increase or decrease the volume accordingly.

EQ Sound Selection

1. Support five different sound effects, like normal, pop, jazz, rock, and classical, the default is normal music.
2. Touch and slide up and down to the “Sound Effect” page, touch the screen to slide left and right, click the sound effect icon to confirm the EQ mode, and it will automatically return to the home page; or no operation for Ss, the page automatically confirms the sound effect and returns to the home page.

Loop Mode

1. Support list loop. single loop to play music. the 1. Support list loop. single loop to play music. the (Olny under the U disk model/rF card mode)
2. Touch and slide the page up and down to the “Loop Mode” page, touch the screen to slide left and right, click the icon to confirm the selection of loop mode. and it will automatically return to the home page: or no operation for Ss. the page automatically confirms the mode and returns to the home page.

Note:

1. Do not break or throw the product to prevent surface or unit damage.
2. Do not turn up your radio’s volume too loud in case of its background noise.
3. Although the transmitting power of our FM transmitter is strong. for ensuring the best sound effect, please tr to avoid adjusting to the frequency of local station with strong signal.
4. Do not use the product in too hot/cold, dusty or damp environment.
5.  Do not disassemble the product personally. Please s. Do not disassemble the product personally. Please

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 1S of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>