Govee H705A RGBIC Permanent Outdoor Lights User Manual
- June 15, 2024
- Govee
Table of Contents
Govee H705A RGBIC Permanent Outdoor Lights
Product Information
- Model : H705A
- Product : Govee RGBIC Permanent Outdoor Lights
Package Contents:
- 6 Light strings
- 1 Power Adapter
- 1 User Manual
- 1 Quick Start Guide
At a Glance:
- a. Power Adapter
- b. Control Box
- c. Permanent Lights
- d. Waterproof Connector
Safety Instructions:
- Read and save these instructions.
Product Usage Instructions
Pairing Your Light with Govee Home App
- Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
- Turn on the Bluetooth on your smartphone.
- Open the app, tap the+ icon in the top right corner and search for H705A.
- Tap the device icon and follow the on-screen instructions to complete pairing.
Controlling the Light with Your Voice
- Open the app, then tap the device icon to enter the details page.
- Tap the setting icon in the top right corner.
- Select “Using Guidance” and follow the on-screen instructions to control the device using your voice.
Troubleshooting
If you encounter any issues with the product, refer to the following
troubleshooting steps:
The adhesive tape is not strong enough or LEDs do not light up fully:
- Use the clips to secure the strip lights firmly during installation.
Cannot connect to Bluetooth:
- Do not skip the Bluetooth connection in the app.
- Ensure the Bluetooth on your smartphone has been turned on.
- Your smartphone may be incompatible with Govee Home app. Try using a different smartphone then reconnect.
- Power the light and your smartphone’s Bluetooth off then on, then try again.
- Ensure that your smartphone is within 1m/3.28ft of the light when connecting.
- Clear any obstructions that are between the light and your smartphone.
The light does not display the selected color fully/Some LED beads do not light up: Please contact the Govee support team for rapid product replacement.
Cannot sync the light to the beat of my music:
- Move the control box closer to the music source.
- Clean the mic on the control box then try again.
Cannot connect to Wi-Fi:
- Do not skip the Wi-Fi connecting steps in the app.
- 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
- Connect your smartphone to Wi-Fi and check whether the network works well.
- Make sure you have entered the correct Wi-Fi name and password.
- Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
- Connect hotspot in your phone to the lights and check whether the router works with the lights.
Cannot connect to Alexa:
- Pull out every connective part of the lights and firmly re-connect them.
- Re-connect your smartphone to Wi-Fi.
- Plug out the adapter port and re-plug it in.
Note : For further information or assistance, refer to the user manual or contact Govee support.
Regulatory Compliance
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may
cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Quick Start Guide
Install the string lights under the eaves to create a wall washing lighting
effect. (Recommend)
Installation Steps
- Before installation, connect each string light and plug it into power to make sure every string light can work properly. The string light might not light up if you plug it into power first and then connect the string light sections.
- Prepare a ladder and make sure it is stable enough or used under another person’s assistance. Please do not install the lights on rainy or hot days so as to avoid falling down due to high temperatures or a slippery ladder.
- Figure out the location of the first string light. Make sure the adapter and control box is long enough to connect to the power supply. Fix the adapter to the wall surface to alleviate the burden of the string lights.
- Note : The waterproof connector with the red washer on the first string light should connect with the control box.
- Clean the surface with cloth or tissues where you plan to install the string lights. Make sure the surface is clean and dry. It is recommend ed to vertically install the string lights 5-10 cm away from the wall surface.
- Tear off the VHB gum on the back of a light and firmly press it against the surface for more than 5 seconds. The slight rotation of the power cord will not affect the use
- Use screw clips to fix the string lights firmly on the eave. Each string light needs 4 screw clips. It is recommended to fix the clips before the first, fifth, and ninth light and after the last one on each string light. The joint between the first string light and the control box, and the power cords at the top of the gable needs to be secured with an extra clip.
- Connect two string lights via the waterproof connectors. Make sure the red washer on one of the connectors does not fall. Firmly screw the waterproof connector cap. Repeat steps 4, 5, and 6.
- After connecting all string lights, firmly screw the waterproof connecto cap of the last string light section.
- Plug into power and enjoy your lighting effects.
You have the option to buy the expansion pack of 5m with 12 lights (not including the control box or the adapter) to meet your needs. The string light can extend up to 150ft (9 string light sections).
” Email : Support@govee.com
“Report an issue” in app
Discover Govee Home
-
Advanced Features
Experience in-depth features via Govee Home App including Music & Scene modes, Tap-to-Run, DreamView, and more -
Stunning Light Effects
DIY & share your own effects in Light Studio and also find thousands of user- made effects to use. -
Shop in the App
Enjoy exclusive discounts and customer service on our one-stop Savy User Store. -
Bonus Content
Earn points towards free Govee products and play exciting mini-games.
Join Our Global Community
Connect with Other Smart Home Lovers
The Govee Home Community is where users can discuss making their lives smarter
and better. View exciting new product experiences, interact with Govee
employees and other Govee users, participate in official events, and learn
about upcoming features and products.
Clubs in the Community
You can discover what you are interested in and meet more like-minded friends
by joining clubs and starting discussions!
Discover the Community using the app’s Compass icon.
FROM COMMUNITY MEMBERS
@SecondProfessor
I made one click and entered a world of colour!
@KaiXiPriest
Making life brighter with every design imaginable!
@jaedenC
Amazing products to make any experience more immersive!
Connect with these users?
Search their nicknames in the community.
READ AND SAVE TH ESE INSTRUCTIONS
Safety Instructions
- This product is rated as IP67 Waterproof. It can be used outdoors but be immersed in water is not recommended.
- The control box and power adapter are both rated as I P65. They can be used outdoor but cannot be immersed in water.
- To prevent the light string from falling down, ensure it is installed with both the adhesive tape and the clips.
- Tighten up the waterproof cap before using the light.
- Do not allow children to assemble and install this product.
- Avoid installing this product near major heat sources or other dangerous sources.
- Avoid using other non-standard adapters for this product.
- External dimmer cannot be used with this product.
- Use this product with the provided power adapter only.
What You Get
Item Quantity
- Light string: 6
- Power Adapter: 1
- User Manual: 1
- Quick Start Guide: 1
At a Glance
- Power Adapter
- Control Box
- Permanent Lights
- Waterproof Connector
Pairing Your Light with Govee Home App
What You Need
- A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
- A smartphone or tablet running iOS 8.0 (or above)or Android 4.3 (or above).
- Download Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
- Turn on the Bluetooth on your smartphone.
- Open the app, tap the”+” icon in the top right corner and search for “H705A”.
- Tap the device icon and follow the on-screen instructions to complete pairing.
Controlling the Light with Your Voice
- Open the app, then tap the device icon to enter the details page.
- Tap the setting icon in the top right corner.
- Select Using Guidance and follow the on-screen instructions to control the device using your voice.
Specifications
| Power Input (Adapter) | 100-240VAC 50/60Hz |
|---|---|
| Power Input (Light) | 36VDC 2A |
| Length | 100ft |
| Waterproof | Light string: IP67 Control box: Rainproof Adapter: Rainproof |
| Light Displaying Technology | RGBIC |
| Working Temperture | -20° to 45°C (-4° to 113°F) |
**Troubleshooting
**
- The adhesive tape is not strong enough.
- Use the clips to secure the strip lights firmly during installation.
- Cannot connect to Bluetooth.
- Do not skip the Bluetooth connection in the app.
- Ensure the Bluetooth on your smartphone has been turned on.
- Your smartphone may be incompatible with Govee Home app. Try using a different smartphone then reconnect.
- Power the light and your smartphone’s Bluetooth off then on, then try again.
- Ensure that your smartphone is within 1 m/3.28ft of the light when connecting.
- Clear any obstructions that are between the light and your smartphone.
- The light do not display the selected color fully/Some LED beads do not light up.
- Please contact the Govee support team for rapid product replacement.
- Cannot sync the light to the beat of my music.
- Move the control box closer to the music source.
- Clean the mic on the control box then try again.
- Cannot connect to Wi-Fi.
- Do not skip the Wi-Fi connecting steps in the app.
- 5GHz network is not supported. Please set the router to 2.4GHz and then reset it.
- Connect your smartphone to Wi-Fi and check whether the network works well.
- Make sure you have entered the correct Wi-Fi name and password.
- Change your Wi-Fi password to a brief one. 8 numbers and letters are suggested.
- Connect hotspot in your phone to the lights and check whether the router works with the lights.
- Cannot connect to Alexa.
- Pull out every connective part of the lights and firmly re-connect them.
- Re-connect your smartphone to Wi-Fi.
- Plug out the adapter port and re-plug it in.
FCC and ISED Canada Statement
This device complies with Part 15 of the FCC Rules and Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-005. Cet appareil numerique de la classe B est conforme a la norme NMB-005 du Canada. Govee is a trademark of Shenzhen lntellirocks Tech. Co., Ltd. Copyright ©2021 Shenzhen lntellirocks Tech. Co., Ltd. All Rights Reserved.
FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body. This
device uses a non-replaceable light source. When the light source reaches the
end of its life cycle, this device should be replaced. Not intended for
illumination. Only used for creating ambiance.
- Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
- Do not use the rope light when covered or recessed into a surface;
- Do not open or cut the rope light;
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen lntellirocks Tech. Co., Ltd. is under license.
Responsible party:
- Name : GOVEE MOMENTS(US) TRADING LIMITED
- Address : 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
- Email : support@govee.com
- Contact information : https://www.govee.com/support
Customer Service
- Warranty : 36-Month Limited Warranty
- G Support : Lifetime Technical Support
- Email : support@govee.com
- Official Website: www.govee.com
- @Govee
- @govee_official
- @govee.official
- @Goveeofficial
- @Govee.smarthome
Govee Home App
For FAQs and more information, please visit
www.govee.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>