iRobot RVD-Y1 Roomba Robot Vacuum Owner’s Manual
- June 15, 2024
- iRobot
Table of Contents
- iRobot RVD-Y1 Roomba Robot Vacuum
- Product Information
- Product Usage Instructions
- Safety information
- GENERAL
- CLEANING SOLUTION
- BATTERY
- AUTOMATIC DIRT DISPOSAL
- About Your Roomba® Robot Vacuum
- About your Clean Base Automatic Dirt Disposal
- Using your Roomba Robot Vacuum
- Cleaning
- Roomba Combo™ Bin
- Care and Maintenance
- Cleaning the Full Bin Sensors
- Cleaning the Mopping Pad
- Troubleshooting
- Battery Safety and Postage
- Regulatory Information
- iRobot Customer Care
- Documents / Resources
iRobot RVD-Y1 Roomba Robot Vacuum
Product Information
- The Robot Vacuum is a highly efficient cleaning device designed to autonomously clean floors. It is equipped with advanced features such as automatic dirt disposal and rechargeable batteries.
- The vacuum is suitable for indoor use only and comes with a user manual for regulatory models RVD-Y1 and ADJ-N1. The battery models compatible with this vacuum are ABL-D1, ABL-D1A, ABL-D2Ax, and ABL-D2Bx (x = 1 or 2).
- The vacuum is classified as Class II equipment.
Safety Information
- It is important to follow the safety precautions provided in the user manual when setting up, using, and maintaining the robot vacuum. The appliance can be used by children aged 8 years and above and individuals with reduced physical, sensory, or mental capabilities, provided they receive proper supervision and instruction. Children should not play with the appliance, and user maintenance should always be carried out under supervision.
- The vacuum is equipped with safety features to prevent electric shock and fire hazards. It is essential to read the operator’s manual and keep the appliance out of reach of children. The symbol for recycling indicates that the vacuum is suitable for proper disposal after its end of life.
Battery Safety
- When handling the battery, it is crucial not to charge damaged or leaking battery packs. Avoid skin or eye contact with the battery liquid, and rinse thoroughly with water if contact occurs. Dispose of the battery in accordance with local environmental regulations or return it to an authorized iRobot Service Center.
Automatic Dirt Disposal
- The robot vacuum features automatic dirt disposal functionality. However, using unauthorized accessories or converters may void the warranty. If the vacuum has been dropped, damaged, left outdoors, or submerged in water, it should be returned to a service center. It is also recommended to use a surge protector during severe electrical storms to protect the appliance.
Product Usage Instructions
- Before using the robot vacuum, carefully read the user manual and safety precautions.
- Ensure that the battery is properly inserted and charged before starting the vacuum.
- Place the robot vacuum on a flat surface in the area you want to clean.
- Press the power button to turn on the vacuum.
- The robot vacuum will autonomously navigate and clean the floor. It is equipped with sensors to avoid obstacles and navigate different surfaces.
- If using the automatic dirt disposal feature, ensure that the disposal unit is properly connected and empty before starting the vacuum.
- If the vacuum encounters any issues or if it needs maintenance, consult the user manual or contact an authorized service center.
- After use, store the robot vacuum in a safe and dry place.
- Follow the battery disposal instructions provided in the user manual to dispose of the battery responsibly.
Safety information
- Important safety information
- This owner’s guide includes information for regulatory model(s): RVD-Y1, ADJ-N1 Battery Model(s): ABL-D1, ABL-D1A, ABL-D2Ax, ABL-D2Bx (x = 1 or 2)
SAVE THESE INSTRUCTIONS
- WARNING: When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS
-
WARNING: To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using, and maintaining your robot.
-
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children must not play with the appliance. Cleaning and user maintenance must not be carried out by children without supervision. -
This is the safety alert symbol. It is used to alert you to potential physical injury hazards.
-
Obey all safety messages that follow this symbol to avoid possible injury or death.
-
WARNING: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
-
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
-
NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage.
GENERAL
WARNING
- Your product is not a toy. Small children and pets should be supervised when your robot is operating.
- Do not sit or stand on your robot or Clean Base™
- Do not use unauthorized chargers. The use of an unauthorized charger could cause the battery to generate heat, smoke, catch fire, or explode.
- Your robot comes with a region-approved power supply cord and is designed to be plugged into a standard household AC power socket only. Do not use any other power supply cord.
- For replacement cords, please contact Customer Care to ensure proper selection of country-specific power supply cords.
- Do not open your robot or Clean Base™. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
- Risk of electric shock, use indoors in dry locations only.
- Do not handle your robot or Clean Base™ with wet hands.
- Store and operate your robot in room-temperature environments only.
- If the room to be cleaned contains a balcony, a physical barrier should be used to prevent access to the balcony and ensure safe operation.
- Clean cliff sensors to remove buildup.
- If the room to be cleaned contains equipment, such as a stove, fan, portable heater, or humidifier, remove the equipment before operation.
- There is a risk of injury, accident, or malfunction if the robot comes in contact with and pushes the equipment.
- Do not allow your robot or charging station to become wet.
- Be aware that floors may be slippery after wet cleaning with your robot.
CAUTION
- Do not operate the robot in areas with exposed electrical outlets on the floor.
- Do not use this device to pick up sharp objects, glass, or anything that is burning or smoking.
- Be aware that the robot moves on its own. Take care when walking in the area that the robot is operating in to avoid stepping on it.
- If the device passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf.
- Before using this device, pick up objects such as clothing, loose papers, pull cords for blinds or curtains, power cords, and any fragile objects. Extinguish candles. Shut off portable heaters.
- Perform the required maintenance as per the Owner’s Guide to ensure safe operation of the robot and dirt disposal.
- If the robot is operating on a floor with stairs, please remove any clutter from the top step.
- Perform the required maintenance as per the Owner’s Guide to ensure the safe operation of the robot and charging station.
- If the robot is operating on a floor with stairs, please remove any clutter from the top step.
NOTICE
- Do not allow your robot or CleanBase to become wet.
- Do not place anything on top of your robot.
- Failure to maintain the cleanliness of charger contacts could result in a loss of ability for the robot to charge the battery.
- Before running your robot on hard floors, please test your robot on a small section of the hard floor to ensure that it is compatible.
- Using your robot on a hard floor that is not compatible could result in damage to your floor. Contact your hard floor manufacturer with questions on compatibility.
- The failure to maintain the cleanliness of charger contacts could result in a loss of ability for the robot to charge the battery.
- Before running your robot on hard floors, please test your robot on a small section of the hard floor to ensure that it is compatible. Using your robot on a hard floor that is not compatible could result in damage to your floor. Contact your hard floor manufacturer with questions on compatibility.
- Before running your robot on carpets or rugs, ensure that the carpets or rugs are compatible with the dual multi-surface rubber brushes on your robot, otherwise known as beater bars.
- Using your robot on a carpet or rug that is not compatible could result in damage to your carpet or rug. Contact your carpet or rug manufacturer with questions on compatibility.
CLEANING SOLUTION
WARNING
- Household cleaning products are safe when used and stored according to the instructions on the label. Always be sure to read and follow the directions carefully.
- Only use authorized cleaning solutions found on answers.irobot.com/s/roomba-combo-cleanser.
- For cleaning solution warnings, please refer to the outer box and solution bottle.
- Keep away from children
- Keep away from eyes. If the product gets into the eyes rinse thoroughly with water
- Rinse hands after use
BATTERY
WARNING
- Do not open, crush, or heat above 176°F: 80°C, or incinerate. Follow the manufacturer’s instructions.
- Do not short-circuit the battery by allowing metal objects to contact battery terminals or immerse in liquid. Do not subject batteries to mechanical shock.
- Periodically inspect the battery pack for any sign of damage or leakage. Do not charge damaged or leaking battery packs, do not allow the liquid to come in contact with skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Place the battery in a sealed plastic bag and recycle or dispose of it safely according to local environmental regulations, or return it to your local authorized iRobot Service Center for disposal.
- Lithium-ion batteries and products that contain lithium-ion batteries are subject to stringent transportation regulations. If you need to ship this product (with the battery included) for service, travel, or any other reason, you MUST see the Troubleshooting section of your manual or contact customer care for shipping instructions.
CAUTION
- Battery usage by children should be supervised. Seek medical advice immediately if a cell or a battery has been swallowed.
NOTICE
- The battery pack must be removed from the robot before recycling or disposal.
- For best results, only use the iRobot Lithium Ion Battery that comes with the robot.
- Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product. For replacement, purchase an identical iRobot battery or contact iRobot Customer Care for alternative battery options.
- Always charge and remove the battery from your robot and accessories before long-term storage.
AUTOMATIC DIRT DISPOSAL
WARNING
-
Do not use if the cord or plug is damaged. If the appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
-
Always disconnect your robot from the dirt disposal before cleaning or maintaining it.
-
Do not use the dirt disposal as a step.
-
Do not put any objects into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce
airflow. -
To properly maintain your dirt disposal, do not place foreign objects inside, and ensure that it is clear of debris.
-
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
-
Do not allow liquids to get on or into the dirt disposal.
-
Do not pour any liquids into the device and do not immerse in water.
-
Do not use it outdoors or on wet surfaces.
-
Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
-
Use only as described in this manual.
-
To reduce the risk of electric shock, unplug your dirt disposal before cleaning it.
-
Keep the dirt disposal and power cord away from heated surfaces.
-
To reduce the risk of electric shock, unplug your dirt disposal before cleaning.
-
Keep the dirt disposal and power cord away from heated surfaces.
NOTICE
- The product may not be used with any type of power converter. The use of power converters will immediately void the warranty.
- If you live in an area prone to electrical storms, it is recommended that you use additional surge protection. Your dirt disposal may be protected with a surge protector in the event of severe electrical storms.
- Do not use without a dust bag and/or filters in place.
- This symbol on the battery indicates that the battery must not be disposed of with unsorted common municipal waste. As the end-user, it is your responsibility to dispose of the end-of-life battery in your appliance in an environmentally sensitive manner as follows:
- returning it to the distributor/dealer from whom you purchased the product; or
- depositing it in a designated collection point
- The separate collection and recycling of end-of-life batteries at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information, please contact your local recycling office or the dealer from whom you originally purchased the product. Failure to properly dispose of end-of-life batteries may potentially result in negative effects on the environment and human health due to the substances in the batteries and accumulators.
- Information regarding the effects of problematic substances in the battery waste stream may be found at the following source: http://ec.europa.eu/environment/waste/batteries/
About Your Roomba® Robot Vacuum
Top View
Buttons & Indicators
About your Clean Base Automatic Dirt Disposal
Front view
Back view
Bottom view
For more information, visit global.irobot.com
Using your Roomba Robot Vacuum
Positioning the Clean Base Automatic Dirt Disposal
- Note: Do not place your Clean Base in direct sunlight. Ensure that the area around the dock is free of clutter to improve docking performance.
- WARNING: To prevent the risk of your robot falling downstairs, ensure that the Charging Station is placed at least 1.2 meters (4 feet) away from stairs.
Download the iRobot Home App and connect to Wi-Fi®
- Follow the step-by-step instructions to set up your Roomba Robot Vacuum.
- Set an automatic cleaning schedule and customize cleaning preferences.
- Create smart maps to tell your robot where, when, and how to clean.
Charging
- Place the robot on the Clean Base to activate the battery.
- Note: Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job.
- If your robot needs to recharge mid-clean, it will return to its Clean Base. Once it is sufficiently charged, it will then resume the cleaning job where it left off.
- The robot uses a small amount of power whenever it is on the Clean Base. You can put the robot in a further reduced power state when not in use.
- For instructions and more details on this Reduced Power Standby Mode, refer to the iRobot Home App.
- For long-term storage, turn off the robot by removing it from the Clean Base and holding it down for 10 seconds. Store the robot in a cool, dry place.
Cleaning
- Remove excess clutter from floors before cleaning. Use your robot frequently to maintain well-conditioned floors.
- Your robot will automatically explore and clean your home. It will return to the Clean Base at the end of a cleaning job and whenever it needs to recharge.
- To send the robot back to its Clean Base, tap .
- A blue light ring pattern will indicate that the robot is seeking the Clean Base.
- When your robot detects an especially dirty area, it will go into DirtDetect™ mode, moving over the area multiple times until it senses that the area has been sufficiently cleaned. The light ring indicator will flash blue.
- Tap to spot-clean a designated area. The robot will spiral outwards about 3 feet (1 meter) and then spiral inwards to end where it started. The light ring indicator will show a blue spiral.
About your Automatic Dirt Disposal
- While cleaning, your robot will automatically return to the dirt disposal to empty its bin and recharge as needed.
- The dirt disposal’s LED indicator will turn solid red when a new bag is needed. If a clog is detected, the dirt disposal will trigger additional attempts to automatically clear the clog.
- Note: If you place your robot on the dirt disposal by hand, it will not empty automatically. In this case, use the iRobot Home App or hold the button down for 2–5 seconds.
Roomba Combo™ Bin
Important: You must register your product in the iRobot Home App and complete a mapping run before using your Combo Bin. See the Activate your Combo Bin card for instructions.
- INSTALL THE MOPPING PAD
- Slide the pad down over the track. Press the pad to the plate to attach.
- FILL THE BIN
- Fill the Combo Bin with water. You may also use a compatible cleaning solution. Compatible solutions are listed at answers.irobot.com/s/roomba-combo-cleanser .
- Note: The product starts wicking as soon as water is put into the tank.
- SWAP THE BINS
- Remove the Dust Bin from the robot, and install the Combo Bin.
- Important: Do not flip the robot over with the Combo Bin installed
Care and Maintenance
Care and Maintenance Instructions
To keep your robot running at peak performance, perform the procedures on the following pages.
Part | Care Frequency | **Replacement Frequency*** |
---|---|---|
Bags | – | Bags should be replaced when prompted by the LED indicator/app. |
Charging Contacts Visual Docking Target | Once every month | – |
The blower Cover inside the canister | Once every month (remove debris from | |
blower cover) | – | |
Bin | Wash bin as needed | – |
Filter | Clean once a week (twice a week if you have a pet). Do not wash | Every |
2 months
Full Bin Sensor| Clean every 2 weeks|
Front Caster Wheel| Clean every 2 weeks| Every 12 months
Edge-Sweeping Brushes and Multi-Surface Brushes| Clean once a month (twice a
month if you have a pet)| Every 12 months
Sensors and Charging Contacts| Clean once a month| –
Mopping pad| Clean after a mopping job| After 30 washes
Wick cap| Replace if dirty or shows wear| –
- Note: iRobot manufactures various replacement parts and assemblies. If you think that you need a replacement part, please contact iRobot Customer Care for more information.
- Replacement frequency may vary. Parts should be replaced if visible wear appears.
- For more information, visit global.irobot.com
Emptying the Bin
- Press the bin release button to remove the bin.
- Open the bin door to empty the bin.
- Place bin back in the robot.
Cleaning the Filter
- Remove the bin. Remove the filter by grasping both ends and pulling out.
- Remove debris by tapping the filter against your trash container.
- Reinsert filter with ridged grips facing out. Place bin back in the robot.
- Important: The robot will not run if the filter is not installed correctly. Replace the filter every two months.
Cleaning the Full Bin Sensors
- Remove and empty the bin.
- Wipe the inner sensors with a clean, dry cloth.
- Wipe the bin door with a clean, dry cloth.
Washing the Bin
Important: Do not wash the filter. Remove the filter before washing the bin.
- Release the bin, remove the filter, and open the bin door.
- Rinse the bin using warm water.
- Note: Bin is not dishwasher safe.
- Make sure bin is completely dry. Reinsert filter and place bin back in the robot.
Cleaning the Edge-Sweeping Brush
- Use a small screwdriver to loosen the screw holding the Edge-Sweeping Brush in place.
- Pull to remove the Edge-Sweeping Brush. Remove any hair or debris, then reinstall the brush.
Cleaning the Front Caster Wheel
- Pull firmly on the front wheel module to remove it from the robot.
- Important: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care.
- Pull firmly on the wheel to remove it from its housing
- Remove any debris from inside the wheel cavity.
- Reinstall all parts when finished. Make sure the wheel clicks back into place.
Cleaning the Multi-Surface Brushes
- Pinch the brush frame release tab, lift the tab, and remove any obstructions.
- Remove the brushes from the robot. Remove the brush caps from the ends of the brushes. Remove any hair or debris that has collected beneath the caps. Reinstall the brush caps.
- Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
- Remove the bin from the robot and clear any debris from the vacuum path.
- Reinstall the brushes in the robot. Match the shape of the brush pegs with the shape of the brush icons in the cleaning head module
Cleaning the Visual Docking Target Sensors, IR Window and Charging Contacts
- Wipe sensors and charging contacts with a clean dry cloth. Alternatively, you can use a pad of melamine foam to remove built-up debris on the robot and Clean Base charging contacts.
- Inspect the visual docking target, IR window and charging contacts to make sure that they are clear of debris. Wipe with a clean, dry cloth.
- Important: Do not spray cleaning solution or water onto the sensors or sensor openings.
Removing Debris from Blower Cover
- Inspect blower cover for any lint or debris build-up and wipe with a clean dry cloth to remove.
Replacing the Bag
- Lift up on the canister lid to open.
- Pull up on the plastic card to remove the bag from the canister.
- Note: This will seal the bag so dust and debris cannot escape.
- Discard the used bag.
- Install a new bag, sliding the plastic card into the guide rails
- Press down on the lid making sure it is completely closed.
Note: To achieve optimal performance with your robot and automatic dirt disposal, clean and/or replace your robot’s filter as needed.
Cleaning the Mopping Pad
HAND WASHING
- Thoroughly wash the pad with warm water.
MACHINE WASHING
- Wash using the warm cycle, then air dry. Do not tumble dry. Do not wash with delicates.
Replacing the Wick Cap
- Remove pad plate
- Remove the wick cap by pulling on the side rubber tab.
- Replace with a new wick cap, pressing firmly into place to create a tight seal to prevent leaking.
- Reintall pad plate
Troubleshooting
Automatic Dirt Disposal
Your dirt disposal will tell you if something is wrong via an LED indicator on the front of the canister and through the iRobot Home App.
LED indicator | Common error | How to fix |
---|---|---|
Solid red | Bag full or missing | 1. Replace the bag if it is full or missing. |
2. Make sure that the bag is securely inserted.
3. If problem persists, remove any debris from the port on the bottom of your robot and the dirt disposal.
Blinking red| There is a leak or a clog in the dock evacuation path| 1. Make sure that the canister lid is pushed down and firmly sealed. Hold the CLEAN button on your robot down for 2–5 seconds to manually empty the bin.
2. Remove any debris from the port on the bottom of your robot and dirt disposal.
3. Unplug the dirt disposal from the wall. Place it on its side and inspect the debris evacuation tube for debris. If necessary, remove the tube to clear any debris.
- This product has been equipped with a thermal protector designed to protect against damage due to overheating.
- If the protector operates, the motor will stop running. If this happens, unplug the unit, allow it to cool for 30 minutes, clear any obstructions from the evacuation port and evacuation tube, then plug the unit back in.
Robot
- Your robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press CLEAN for details. Further support and instructional videos are available in the iRobot Home App.
- If you are unsure if the robot is finished or paused, consult the iRobot Home App to check on its status.
Battery Safety and Postage
- WARNING: Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transportation regulations. If you need to post this product for service, travel or any other reason, you MUST follow the postage instructions below.
- Battery MUST be turned off before postage.
- Turn off the battery by removing the robot from the Clean Base and holding down for 10 seconds. All indicators will turn off.
- Package the robot securely for postage.
- If you need further assistance, contact our Customer Care team or visit global.irobot.com.
Regulatory Information
- Hereby, iRobot Corporation declares that this robot vacuum cleaner model RVD-Y1 is in compliance with the EU Radio Equipment Directive 2014/53/EU.
- The full text of the EU Declaration of Conformity is available at the following internet address: www.irobot.com/compliance.
- Hereby, iRobot Corporation declares that this robot vacuum cleaner model RVD-Y1 is in compliance with the Radio Equipment Regulations 2017.
- The full text of the UKCA Declaration of Conformity is available at the following internet address: www.irobot.com/compliance.
- Chemical information report listing SVHC (substances of very high concern) per EU Regulation EU 1907/2006 can be found here: www.irobot.com/compliance.
- This vacuum cleaning robot, model RVD-Y1, incorporates the Sundial radio module model: AXF-Y1. This vacuum cleaning robot, model RVD-Y1 operates in the WLAN 2.4 GHz band. The 2.4 GHz band is limited to operate between 2412 MHz and 2472 MHz with a maximum EIRP output power of 19.1 dBm (81.28 mW) at 2442 MHz.
- This symbol on the product indicates that the appliance must not be disposed of with unsorted common municipal waste. As the end-user, it is your responsibility to dispose of the end-of-life appliance in an environmentally sensitive manner as follows:
- returning it to the distributor/dealer from whom you purchased the product; or
- depositing it in a designated collection point.
-
Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise
from inappropriate waste handling. Please contact your local authority for further details or your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation. More information may be found at the following source: https://ec.europa.eu/environment/topics/waste-and-recycling/waste- electrical-and-electronic-equipment- weee -
Recycle your end-of-life iRobot product responsibly as per local regulations. The following is a list of the WEEE recycling organisations contracted by iRobot at the time of product sale.
Location | Organisation | URL |
---|---|---|
Austria | UFH | [ **http://www.elektro-ade.at/elektrogeraete-sammeln/liste- |
dersammelstoesterreich/](http://www.elektro-ade.at/elektrogeraete-sammeln
/liste-dersammelstoesterreich/)
Belgium| Recupel| [ https://www.recupel.be/en/where-to-go/?search
collectionPoints= &categories=1%2C2%2C3%2C4#](https://www.recupel.be/en
/where-to-go/?searchcollectionPoints=&categories=1%2C2%2C3%2C4#)
Germany| Zentek| [ https://www.ear-system.de/earverzeichnis/sammel-und-
ruecknahmestback](https://www.ear-system.de/earverzeichnis/sammel-und-
ruecknahmestback)
Denmark| Elretul| https://www.dpa-
system.dk/DPAApplications/DPADB.aspx?wf=CollectionPointSearch.as
Spain| Ecotic| [ https://punto-limpio.info/**](https://punto-limpio.info/)
France| Eco-systemes| https://www.eco-systemes.fr/france
Ireland| WEEE Ireland| http://www.weeeireland.ie/household-recycling
/where-can-i-recycle/
Netherlands| Wecycle|
https://www.watismijnapparaatwaard.nl/
Sweden| El-Kretsen| https://www.sopor.nu/sortera-
återvinn/
United Kingdom| Repic| http://www.responsible-recycling.co.uk/contact-us
/find-your-local-recy
- Manufacturer Address: iRobot Corporation, 8 Crosby Drive,
- Bedford MA 01730, USA
- ©2023 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730, USA. All rights reserved. iRobot is a registered trademark of iRobot Corporation. Roomba Robot Vacuum, Clean Base and Dirt Detect are trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance. Apple and App Store are trademarks of Apple Inc., registered in the US and other countries. Google Play is a trademark of Google LLC.
iRobot Customer Care
USA & Canada
- If you have questions or comments about your dirt disposal, please contact iRobot before contacting a retailer.
- You can start by visiting global.irobot.com for support tips, frequently asked questions, and information about accessories. This information can also be found in the iRobot HOME App.
- If you need further assistance, call the US Customer Care team at 877-855-8593.
- iRobot USA Customer Care Hours
- Monday to Friday, 9AM — 9PM Eastern Time
- Saturday and Sunday 9AM — 6PM Eastern Time
- Outside USA & Canada Visitglobal.irobot.com to: Learn more about iRobot in your country
- Get hints and tips to improve your product performance
- Get answers to questions
- Contact your local support center
- The complete owner’s guide is available at about.irobot.com/manual#comboi5plus
- For more information, visit global.irobot.com
Documents / Resources
|
iRobot RVD-Y1 Roomba Robot
Vacuum
[pdf] Owner's Manual
RVD-Y1 Roomba Robot Vacuum, RVD-Y1, Roomba Robot Vacuum, Robot Vacuum
---|---
References
- Manuals | iRobot
- Welcome to LWC Communities!
- Global.iRobot.com
- Elektrogeräte sammeln | Elektro ade
- iRobot®: Robot Vacuums and Mops
- irobot.com/compliance
- iRobot Italia | Scopri lo Shop Online Ufficiale
- Contact Us - Electrical Recycling | REPIC | Responsible Recycling
- Buscador de puntos-limpios | Buscador de Puntos Limpios
- stiftung elektro-altgeräte register
- Donner une seconde vie à mes équipements électriques | ecosystem
- Find a collection point - Recupel
- Wat is mijn apparaat waard? | Wat is mijn apparaat waard?
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>