ADXMIC24 FIRECAST Pro 24 Microphone Instruction Manual

: June 15, 2024
: adx

Table of Contents

Safety Warnings
Unpacking
Product Overview
Installation with the stand
Connections
Software Installation
User Interface
User Interface- Light
User Interface – Light Effect
Hints and Tips
System Requirements
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FIRECAST **Pro. 24
MICROPHONE
INSTRUCTION MANUAL
ADXMIC24

**

Safety Warnings

Damage

Please inspect the unit for damage after unpacking.
Do not continue to operate the unit if you are in any doubt about it working normally, or if it is damaged in any way.
Temperature
Avoid extreme degrees of temperature, either hot or cold. Place the unit well away from heat sources such as radiators or gas / electric fires.
Avoid exposure to direct sunlight and other sources of heat.
Naked Flames
Never place any type of candle or naked flame on the top of or near the unit.
Interference
Do not place the unit on or near appliances which may cause electromagnetic interference. If you do, it may adversely affect the working performance of the unit, and cause a distorted sound.

Thank you for purchasing your new product.
We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.
Read all the safety instructions carefully before use and keep this instruction manual for future reference.

Unpacking

Remove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.
The following items are included:

Microphone
Metal Tripod
USB Cable

Product Overview

Microphone
Microphone Volume Knob
• Turn to + position to maximize the microphone’s volume.
• Turn to – position to mute the microphone’s volume. The knob will light up red.
• Turn to the position to enter Cardioid microphone mode.
• Turn to the O position to enter Omnidirectional microphone mode.
– + Headphone Knob
Turn clockwise/anticlockwise to increase/decrease
headphone’s volume.
Microphone Stand
Headphone Socket
Mute Button
Press to mute the microphone, and press again to unmute.
USB-C Socket
Connect the USB-C plug of the USB cable to the UBS-C socket and the other end of the cable to the USB socket of your PC.

Installation with the stand

Place the microphone onto the tripod, and then secure it by turning clockwise.

Purchase ADXMCARM24 for the mounting arm, and ADXPFLT24 for the microphone filter.

Connections

Connecting to the computer
Connect the microphone to your computer (not included) with the provided USB-C cable.

Using Earphones
Turn down the volume before connecting earphones (not included). Slowly raise the volume with the earphones on until you reach your desired volume.

Long-term exposure to loud music may cause hearing damage. It is best to avoid extreme volume when using headphones, especially for extended periods.

Software Installation

Plug the unit into the USB port of your computer.
Download the latest gaming software from https://downloads.adxgaming.com (under ADX HUB 2) Run the software (ADX HUB 2 Setup.exe) installer.
Follow the installation instruction to complete the installation.
Choose ADX HUB 2.exe from the desktop to start the software.

User Interface

Choose ADX HUB.exe from the desktop to launch the software.
Select “Microphone“ and then “ADXMIC24“ at the bottom of the connected device list to enter the interface.

User Interface- Light

Select Light to enter the Light Settings page.
Choose your preference among the below:
• Mode
• Brightness
• Speed
Select “Apply“ to implement your settings, or “Reset“ to reset all settings.

User Interface – Light Effect

If one more ADX gaming device is connected, you may synchronize their light effect.

Select Light Effect, and the devices you want to apply the light effect.
Select your preferred
Lighting Settings (Mode, Brightness and Speed).
Select “Apply“ to implement your settings.

To reset the setting of a particular device, select a connected device shown in the menu, and then select Reset.

Hints and Tips

Make sure the USB plug is fully plugged into a USB port and the computer is on or try to use a different USB port.
If the unit is not working properly, re-insert the USB plug into the USB port.
While using the microphone, make sure that

you are facing to the front of the unit;

The microphone is in a stand-straight position (when it is connected with mounting arm ADXMCARM24, not included).

System Requirements

Operating Systems: Microsoft® Windows® 10 / 11
Hardware: PC with available USB 2.0 port

Specifications

Model	ADXMIC24
Frequency Response	20 Hz – 20 KHz
Sensitivity	-43dB for cardioid

Features and specifications are subject to change without prior notice.

Currys.co.uk
All the support you need.
Whether it’s a tech emergency or you need plain good advice, we’re always on hand to help.
UK: 0344 561 1234 IRE: 0818 810575

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories.
With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste.
Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Windows is either trademark or registered trademark of Microsoft Corporation in the United States and/or other countries.
All trademarks are the property of their respective owners and all rights are acknowledged.

Currys Group Limited (co. no. 504877)
1 Portal Way, London, W3 6RS, UK
EU Representative
Currys Ireland Limited (259460)
3rd Floor Office Suite
Omni Park SC, Santry, Dublin 9, Republic of Ireland
IB-ADXMIC24-230720V1