Q Plus H6 Quad TV Box Android 9.0 User Manual

Q Plus H6 Quad TV Box Android 9.0

PRODUCT INFORMATION

MODEL NO.: Q Plus H6 Quad TV Box Android 9.0

Basic Operations

Power On/ Off and Sleep

1. Connect the box to the TV with HD cable, connect box to the power adaptor, Connect mouse, air mouse or other input devices with USB port
2. After the device and cable connected ,power led turn to blue
3. After the device and cable disconnected, Power LED turns off
4. Under power on mode, press remote control’s power button, device is entering into sleep mode.
5. Under sleep mode, device will be wake when you press remote control’s power button,

**Open applications

**

Use remote control’s arrow keys to choose the wanted program, click OK button to open the selected program

Switch in the applications
Click “My Apps” to view recently used programs, click program icon to switch application arbitrarily

Close Applications
Click icon to view recently used programs, choose one of them by click and hold, drag it to blank area to close the application

This function only operated in the condition of Mouse mode

Back To Home Screen

• Click icon to return to home screen
• Click icon on remote control to return to home screen

Read External Storage Data

• Read U Disk
  Insert U flash disk or removable hard disk into USB port in the status of power on, icon USB appears in top left corner of the desktop, open “FileBrowser”, the identified USB(A:) will annear under “ocal Disk” U dick’s oneration is available now

• Read TF card
  Insert TF card into the device in the status of power on, when icon appears in top left corner of the desktop, open “FileBrowser”, the identified External Storage Card will appear under “focal Dick” TE card’s oneration is availahle now

• WIFI Function
  Home Screen → Settings Network Select “Wi-Fi” to open WIFI function Choose hotspot Input Password → Connect to the network

• Ethernet Function
  Home Screen → Settings Network Select ‘Ethernet” to open Ethernet function Insert network cable, network will be connected automatically

• WLAN Hotspot
  Operations on the box :
  

  • Home Screen > Settings > Other >More Setting Portable hotspot > Select “Portable Wi-Fi hotspot”
  • Select “Set up Wi-Fi hotspot” to set up “Network SSID”. “Security” “Password” parameters
  • Ensure connected to the wired network, the box can be used as wireless AP to support more wireless devices access in the familv

The Step that how to reflash the box

1. Uncompress the downloaded firmware(ROM) to the root of and SD/TF card(format your card first).
2. Insert the SD Card into powered-off Box (power cable not plugged in) with no external USB storage attached.
3. Using a toothpick, insert into the AV port of Box, press and hold the hidden button while plugging power in.Do not release until you see the screen of Robert Logo.
4. Update will run automatically. When it is done then choose “Reboot”. You can disregard any errors that display after the update, they are not relevant to your device.
5. When system has rebooted then you should first check to ensure wift is working by going to Settings->Wi-Fi. Turn on the wifi if it’s off and you should be able to connect.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>