SECO-LARM SS-077Q Latching Hold Up Button User Manual

: June 13, 2024
: SECO-LARM

Table of Contents

SECO-LARM SS-077Q Latching Hold Up Button
Product Information
Product Usage Instructions
Important Information
Specifications
Overview
WARRANTY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SECO-LARM SS-077Q Latching Hold Up Button

Product Information

Product Name: SS-077Q / SS-078Q Hold-up Button

Product Usage Instructions

Please read the manual before you begin the installation.
Remove the screw on top of the unit to drop out the base.
Connect wires to the 2 terminals inside the back to the control unit.
Mount the base in the desired location.
Place the top back on and screw it down.

Important Information

Users and installers of this product are responsible for ensuring that the installation and configuration comply with all national, state, and local laws and codes. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes.
California Proposition 65 Warning: These products may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Warranty: This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for 1 (one) year from the date of sale to the original customer.

Features

```
* Highly reliable switch mechanism
```
- Attractive, durable stainless steel housing
- Compact size
- High-security key reset
- Use with either N.C. or N.O. input
- Includes 2 keys. Spare keys are also available (SS-078-KEY)

Specifications

```
*  **Model:** SS-077Q, SS-078Q
```
- Contact: N.C., push-to-open; N.O., push-to-close
- Switch type: SPST
- Switch rating: 1A@12VDC
- Terminal Type: Screws x2
- Mounting Type: Surface
- Dimensions: 2 3/4″ x 2 3/16″ x 11/16″ (70mm x 56mm x 27mm)
- Housing: Stainless steel

Installation
Please read the manual before you begin the installation

Remove screw on top of unit, so that the base drops out.
Connect wires to the 2 terminals inside back to the control unit.
Mount the base in the location needed.
Place top back on and screw down.

Overview

IMPORTANT: Users and installers of this product are responsible for ensuring that the installation and configuration of this product complies with all national, state, and local laws and codes. SECO-LARM will not be held responsible for the use of this product in violation of any current laws or codes. SECO-LARM-SS-077Q-Latching-Hold-UpButton-fig-1

California Proposition 65 Warning: These products may contain chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

WARRANTY

This SECO-LARM product is warranted against defects in material and workmanship while used in normal service for 1 (one) year from the date of sale to the original customer.

NOTICE: The SECO-LARM policy is one of continual development and improvement. For that reason, SECO-LARM reserves the right to change specifications without notice. SECO-LARM is also not responsible for misprints. All trademarks are the property of SECO-LARM U.S.A., Inc. or their respective owners. Copyright © 2023 SECO-LARM U.S.A., Inc. All rights reserved.

SECO-LARM ® U.S.A., Inc.