BUONO BUO-265701 Coffee Machine With Grinder User Manual

BUONO BUO-265701 Coffee Machine With Grinder User Manual

Dear Customer,
Thank you and congratulations for choosing our product. Please read this instruction manual carefully before using the product, as it contains important information that you may find helpful. Keep this instruction manual for future reference. Connection to the mains supply. The appliance should only be connected to an earthed socket and make sure that the supply voltage corresponds with the voltage marked on the rating label.

Important Safety Instructions

Before using the electrical appliance, the following basic precautions should always be followed including the following

1. Before the appliance is used, the main body as well as any attachment fitted should be checked thoroughly for any defects. Should the appliance, for instance, have been dropped onto a hard surface, it must not be used any longer: even invisible damage may have adverse effects on the operational safety of the appliance.
2. The appliance must always be under supervision when in use.
3. Connect plug to wall outlet before using and turn any switch off before plug is removed from wall outlet
4. Children should be supervised to ensure that they do not play with the appliance.
5. Do not use the appliance with wet hands, on a damp floor or when the appliance itself is wet.
6. To protect against a risk of electric shock and personal injury, do not immerse cord plugs or coffee maker housing in water or other liquids.
7. The machine gets extremely hot when it’s boiling. Be careful of hot steam coming out from the machine.
8. Do not use the appliance with a damaged plug or cord. Contact an authorized service center for checking or replacement of the damaged part.
9. When using the appliance ensure that you use original accessories provided by the manufacturer.
10. Do not use outdoors
11. Place the machine on a heat-resistant surface clear of any obstructions.
12. Do not position or operate the machine close to or underneath any wall- cupboards or hanging objects such as curtains or any inflammable materials.
13. Do not place on or near a hot gas or electric burner or in a heated oven.
14. Do not let the cord to hang over the edge of the table or counter, nor touch hot the parts of the appliance.
15. When removing the plug from the wall socket, never pull on the power cord: always grip the plug itself.
16. Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned. Use only pure water when filling the container.
17. Do not let the machine operate without water.
18. DO NOT remove the metal filter holder while brewing coffee or when steam.
19. Caution should also be taken while removing the metal filter holder since the metal parts will be hot.
20. Do not switch on the machine when the tank is empty.
21. Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely. Detailed information on cleaning the appliance can be found in the section Cleaning and care.
22. This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
23. This product is guaranteed against defects in materials and workmanship for a period of one year from the date of purchase. This guarantee is only valid if the appliance has been used in accordance with the instruction, and provided that it has not been modified, repaired or interfered with by any unauthorized person, or damaged through misuse..
24. This appliance is intended for domestic use only and not for commercial applications.

Description of Parts

A. ON/OFF Switch
B. Pressure Gauge
C. Coffee Bean Box
D. Water Tank
E. Cupwarmer
F. Steam Knob
G. Control Panel
H. Body
1. Steam Tube
J. Two Cup Filter
K. Single Cup Filter
L. Metal Filter Holder
M. Drip Tray
N. Drip Plate
O. Grinder Adjustable Knob
P. Portable Funnel Holder for Coffee Powder
Q. Hot Water Switch

Control Panel

Indicators:
Each button has a light indicator around, and there is a triangular light indicator on the fixing ring of steam knob.

Preheating:
Press the Power button once, the machine enters the preheating state, and the four indicators flash white in the form of a breathing lamp. The machine need around 50S to preheat.

Standby:
After the machine is preheated, it enters the standby state. The four indicators and steam indicator are illuminated constant white.

Make hot water:
In the standby state, press the Hot water button once to enter the hot water function. At this time, the Power button indicator becomes constant white, the hot water indicator flashes white in the form of a breathing lamp, Single cup and Double cup indicators extinguish. Press the Hot water button again, the hot water function stops, and the machine enters the standby state.

Brew single cup coffee:
In the standby state, press the Single cup button once to enter the function of brewing a single cup of coffee. At this time, the Power button indicator is always white, and the single cup indicator flashes white in the form of a breathing lamp, hot water indicator and double cup indicator go out. Pressing the Single cup button once again or waiting for the ending of single cup function, the machine enters the standby state.

Brew double cup coffee:
In the standby state, press the Double cup button once to enter the function of brewing double cup coffee. At this time, the Power button indicator is always white, the double cup indicator light flashes white in the form of breathing lamp. hot water indicator and single cup indicator go out. Pressing the Double cup button again or waiting for the ending of double cup coffee function, and the machine enters the standby state.

Steam preheating:
In the standby state, turn the steam knob to the preheating position. At this time, the Power indicator is always white, the hot water, single cup and double cup indicators are off, and the steam indicator (triangle) flashes white. At this time, the steam function is preheating, and the steam indicator is always white, and the steam function is preheated.

Make steam:
When the steam is preheated, turn steam knob to the Max position, at this time, the Power indicator is always white, the hot water, single cup and double cup indicators are off, and the steam indicator flashes white in the form of a breathing lamp, at this time the steam function is in progress, turn the steam knob to the preheating position again, the steam indicator returns to the normal white, the steam function is finished, select the steam knob to the “off” position, the machine enters cooling state, at this time the steam indicator is extinguished. Until the machine is cooled down completely, the machine enters the standby state.

Grinding coffee beans:
Press power button, grinding indicator is lighted white, indicating unit enters grinding beans preparation state, at this time attach pressurized filter holder into filter holder bracket and push it forwards to grind coffee beans, during grinding the grinding indicator flashes white; when grinder is not fit in place, grinding indicator flashes red, at this time coffee beans can not be ground until grinder is fit in place.

Sleep mode:
When the machine is not operating for 30 minutes in the standby state, it will automatically enter the sleep state. At this time, three indicators except the Power button indicator are off, the Power button indicator flashes twice red, the buzzer rings two times. Pressing any button in sleep mode activates the machine to re-enter the preheating state.

BEFORE THE FIRST USE

1. Check and ensure all accessories no broken.

2. Fill appropriate water into water tank.

3. Insert pressurized filter holder into filter holder snap position of the machine, turn it anticlockwise to lock tightly
   

4. Place a container on the drip plate, connect the machine into power source, steam knob shall be in off position, press the Power button, the machine enters the preheating state, after finishing preheating, the machine enters the standby state.

5. Press the Hot water button to dispense proper hot water, then press Hot water button to stop hot water function, press Single or Double cup button to clean tubing system of machine.

6. Clean all detachable parts by warm water

Choose appropriate ground coffee
The coffee should be freshly ground and subjected to deep roasting. You may need to use French or Italian roasted coffee powder for espresso. Pre-ground coffee powder can only remain scented for 7 to 8 days unless it is stored in a sealed container and placed in a cool place. Do not store coffee in the refrigerator or freezer. It is recommended to grind all coffee beans into powder before use. The fragrance of the coffee beans stored in the sealed container can be maintained for 4 weeks.

If you are grinding coffee beans for yourself, this step is a key step in the espresso making process and requires more practice. The coffee beans must be finely ground, and the adjustment knob can adjust the coarseness&fineness of ground coffee. The preset intermediate grind setting is optimal when the machine leaves the factory. When coffee ground by cutting blade becomes coarser during use, the adjustment knob can be properly rotated to make the ground coffee finer

• The ground coffee should look like salt.
• If the powder is too fine, even if it is tamped it may cause the coffee to flow out intermittently. These ground coffee feels like flour
• If the powder is too thick, the water will flow too fast, which will hinder the extraction of its rich aroma.

In order to get a uniform, consistent coffee, be sure to use a high quality coffee grinder

Operation instruction

1. Fill appropriate water into water tank, water level can’t exceed MAX.

2. Connect the machine into power source, press the Power button (steam knob needs to be turned off), the machine starts to preheat, the indicator flashes until the machine finishes preheating, the power indicator becomes always on, and it enters the standby state.

3. Grinding coffee beans: Press power button, attach grinder to unit, grinding indicator is lighted white, fill bean container with appropriate coffee beans, turn adjustment knob to the proper setting, then attach pressurized filter holder into filter holder bracket and slightly push it forwards to grind coffee beans until desired amount of ground coffee is reached.
   Tip:

4. it is recommended to make delicious coffee at grind settings 8-10 and the continuous working time of grinder should not be more than 1min each time.

5. If pressure gauge indicates too low pressure during brewing, you can turn the grind knob to a finer setting and then try to grind the beans to brew the coffee. (see below figure)

6. If pressure gauge indicates too high pressure during brewing so that coffee can’t be brewed or coffee is over-extracted, you can turn the grind knob to a coarser setting, and try to grind beans to brew coffee. (see below figure)
   

7. Make hot water: Press Hot water button, the Hot water button indicator flashes in the form of a breathing light; hot water flows out from hot water pipe, after dispensing 175ml hot water, the machine automatically stops and returns to standby mode. To stop the hot water function anytime, press the Hot water button again.

8. Brew single cup of coffee: Attach 1-cup filter to the filter holder, load 13-15 grams of coffee powder into filter using a tamper and press the coffee powder with a force of 10-15Kg, then align the filter holder assembly with the filter holder bracket buckle position and turn it counterclockwise into the filter holder bracket, put a coffee cup on the drip plate under the filter holder. Press the Single cup button in the standby state, the Single cup button indicator flashes in the form of a breathing light; the machine starts to brew coffee, and the pressure gauge will display pressure parameters in brewing process, when the coffee is finished, the pressure gauge is reset, all indicators on the panel are solid on, and machine restores to the standby mode.

9. Brew double cup of coffee: Attach 2-cup filter to the filter holder, load 20-22 grams of coffee powder into filter using a tamper and press the coffee powder with a force of 10-15Kg, then align the filter holder assembly with the filter holder bracket buckle position and turn it counterclockwise into the filter holder bracket, put a coffee cup on the drip plate under the filter holder. Press the Double cup button in the standby state, the Double cup button indicator flashes in the form of a breathing light; the machine starts to brew coffee, and the pressure gauge will display pressure parameters in brewing process, when the coffee is finished, the pressure gauge is reset, all indicators on the panel are solid on, and machine restores to the standby mode.
   Recommendation: To make a delicious hot espresso, we recommend that you preheat the appliance before making the coffee, including the filter holder, filter and cup, so that the coffee will not be affected by the cold appliance

10. Produce steam to froth milk: In standby mode, turn steam knob from Off to Max position, the machine starts making steam, the steam indicator flashes white in the form of a breathing light during making steam. To stop steam function, turn the steam knob from Max to Off position and steam indicator becomes constant on.
    Note: it is recommended to allow the machine to have 1 minute rest after performing steam function for continuous 10 minutes, so as to prevent the machine from overheating.

11. Cup volume adjustment: Press and hold Single cup button and Double cup button at the same time, the machine enters customized cup volume status (single indicator and double indicator flash at the same time), press single button at this time (single indicator flashes, double indicator illuminates) to memorize single cup volume while start to dispense hot water, press Single cup button again (single indicator illuminates) to stop dispensing water and finish memorizing. After the memorization is completed, the machine resumes customized cup volume status; Set double cup volume in same method as above. (For single cup amount of water is 20-60ml, double cup is 60-100ml)
    Note:

12. Steam knob shall be in off position during preheating when brewing coffee or Making hot water.

13. Single cup or double cup coffee can be brewed only after finishing
    preheating.

14. You can press single button or double button to stop during coffee
    brewing.

15. When water tank lacks of water(less than MIN level), the unit will alarm, Indicator flashes, after refilling water, it will turn to normal condition,

16. If you want to return cup volume to the defaulted factory setting, just press and hold the corresponding cup button for 55 while button indicator flashes twice.

17. After finish frothing milk, the steam pipe should be wiped with a moist cloth in time, and steam shall be produced for a length of time to prevent the milk from clogging the steam nozzle. In case of steam pipe blockage, clean needle can be used to dredge steam pipe hole.

18. After finish making steam, hot water and brewing coffee functions cannot be performed during machine cooling stage until machine enters standby mode.

19. When the red float of the drip tray rises above the drip plate, it means that the drip tray is near full water, please pour water in time

CLEANING AND MAINTENANCE

Tip: The grinder of this coffee machine is detachable. The detailed dis- assembly method is shown below:
Dis-assembly method: Press release button as shown, turn the adjustment knob to the maximum setting, and then turn it in the dis-assembly direction shown in the figure to remove the grinder vertically.

Assembly method: Align the bump position of grinder with the slot position of unit, attach grinder into unit vertically. Turn the adjustment knob to the finest setting and turn the grinder in the assembly direction until a click sound is heard.

Each time the grinder is used, the remaining coffee beans can be removed and the residual coffee powder in the grinder can be cleaned with the brush.

1. Cut off power source and let the coffee maker cool down completely before cleaning.

2. Clean housing of coffee maker with moisture-proof sponge often and clean water tank, drip tray and removable shelf regularly then dry them.
   Note: Do not clean with alcohol or solvent cleanser. Never immerse the housing in water for cleaning.

3. Detach the metal filter holder by turning it clockwise, get rid of coffee residue inside, then you can clean it with cleanser, but at last you must rinse with clear water. Do not wash the metal filter holder in a dishwasher.

4. Clean all the attachments in the water and dry thoroughly.
   Note: Removable water tanks, bean box, grinder, and filter holder bracket cannot be washed in the dishwasher.
   

CLEANING MINERAL DEPOSITS

To keep your coffee maker operating efficiently, you should clean away the mineral deposits left by the water regularly according to the water quality in your area and the frequency use the appliance, the detail is as follows:

1. Fill the water tank with water and descaler to the MAX level in the gauge of coffee maker (the scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please use “household descaler, you can use the citric acid instead of the descaler (the one hundred parts of water and three parts of citric acid).
2. Press the power button, the unit enters preheating, after finish preheating, the indicator becomes solid on
3. Make sure the filter holder locks in place.
4. Place a large enough container (approx. 2L) to receive water under the filter holder outlet, hot water pipe nozzle and steam nozzle
5. Press and hold the Hot water button for 5s, the machine will enter the automatic cleaning function, then turn the steam knob to the Max position. During the automatic cleaning process, the descaler solution will flow out from the filter holder, hot water pipe and steam pipe respectively, after 10-15 minutes, the cleaning function is completed, the machine enters the power-off state,
6. After removing scale, fill clear water into water tank, repeat step 4 until descaler solution is cleaned up.
7. After cleaning, clean water tank and drip tray.

Note:

1. During automatic cleaning process, a suitable container (about 2L) shall be placed at the filter holder outlet and hot water outlet to receive water.
2. During cleaning, the pump will start and stop intermittently. This is a normal phenomenon.
3. During cleaning, the steam knob must be turned on. If the automatic cleaning function is switched to clean steam tube, the machine will alarm once the steam knob is turned off. At this time, the steam knob shall be turned on and the water will flow out of the steam tube.
4. It is recommended that the user shall perform descaling operation after 1000 working cycles. If the total working cycle of the machine reaches 1000 cycles, there will be a reminder signal once the machine is turned on (four indicators on the panel will flash red twice), which reminds user to perform descaling.

TROUBLESHOOTING

facility for repairing.
Water leaks out of outer side of filter.| There is some coffee powder on filter edge.| Get rid of them.
Acid (vinegar) taste exists in Espresso coffee.| No clean correctly after cleaning mineral deposits.| Clean coffee maker per the content in “before the first use”for several times.
The coffee powder is stored in a hot, wet place for a long time. The coffee powder turns bad.| Please use fresh coffee powder, or store unused coffee powder in a cool, dry place. After opening a package of coffee powder, reseal it tightly and store it in a refr gerator to maintain its freshness.
The coffee maker cannot work any more.| The power outlet is not plugged well.| Plug the power cord into a wall outlet correctly,if the appliance still does not work, please contact with the authorized service facility for repairing.
The steam cannot froth.| The container is too big or the shape ist *!| Use high and narrow cup.
You have used skimmed milk| Use whole milk or half-skimmed milk
During brewing, both indicators of the single and double cups flash red in the form of a breathing light, and no coffee flows out of the filter holder or only flows out drop by drop| Check if the coffee filter holder is clogged| Coffee powder should not be too fine, and the amount of coffee powder exceeds the standard.
All the indicators ofthe machine flash red| Check if the water inside the water tank is short| Fill water to the water tank until the alarm condition disappears
Grinding indicator flashed red| If the grinder can work properly and grinding indicator flashes red, this is the high temperature alarm of the grinder;| The grinder is allowed to rest for a while until grinding indicator cancels the alarm;
| If the grinder can not work properly when grinding indicator flashes red, it is the grinder is attached improperly| Need to re-attach grinder.
grinder can not dispense coffee powder at finest setting| This is normal, but coffee powder can be dispensed if it is used for a long time, you can adjust to the coarser grind setting.| Adjust grind setting properly

Disposal

Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points

Technical specifications

Product: BUONO Espresso Maker with Grinder
Model: BUO-265701
Power: 2,560-3,050 Watt
Frequency: 50-60 Hz
Voltage: 220-240 Voltage
Water tank capacity: 2.7 Liter
Bean box capacity: 350g
Pressure pump: 20 Bar

Made in China

Imported & Distributed by:

VERASU GROUP CO., LTD.
83/7 Wireless Rd., Lumpini, Patumwan, Bangkok 10330
Tel. +66 (0) 2254 8100
Fax: +66 (0) 2254 8109
email: askverasu@verasu.com
www.verasu.com

THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!
Please read the Instruction manual detail before use.
DO NOT IMMERSE THE APPLIANCE IN ANY LIQUID.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>