TELBIX OVERTON PE Overton CTC Pendant Light 6Lt in Brass Instructions
- June 13, 2024
- Telbix
Table of Contents
TELBIX OVERTON PE Overton CTC Pendant Light 6Lt in Brass
Product Information
The product is an OVERTON PE lighting fixture, identified by item number
L3124. It is available in two options: Option 1 and
Option 2. The fixture operates on a voltage of 240V with a frequency of
50Hz. It uses E27 type bulbs with a maximum power rating of 25W. Please note
that the bulbs are not included with the product.
Product Usage Instructions
- Before installation, ensure that you have a qualified electrical contractor to perform the installation.
- Follow the installation guidelines provided in the AS/NZS3000 standard.
- Select the desired option (Option 1 or Option 2) for the lighting fixture.
- If using Option 1, follow steps 3, 4, and 5:
- Connect the lighting fixture to a power source with a voltage of 240V and a frequency of 50Hz.
- Insert up to six E27 bulbs into the fixture, ensuring their power rating does not exceed 25W each.
- Securely fasten the bulbs in place.
- If using Option 2, follow steps 3 and 6:
- Connect the lighting fixture to a power source with a voltage of 240V and a frequency of 50Hz.
- Insert a single E27 bulb into the fixture, ensuring its power rating does not exceed 25W.
Please ensure that you strictly adhere to the installation guidelines and safety precautions mentioned in the user manual. Failure to do so may result in electrical hazards or damage to the product.
INSTALLATION INSTRUCTION
Option 1
Option 2
IMPORTANT
- Must be installed by a qualified electrical contractor.
- Install in accordance with AS/NZS3000
DISCLAIMER
PRODUCT SPECIFICATION
- 240V～50Hz
- E27
- Max.25W
- x6
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>