Hisense 40 Inch Class A4 Series LED 4K UHD Smart Android TV User Manual
- June 13, 2024
- Hisense
Table of Contents
Hisense 40 Inch Class A4 Series LED 4K UHD Smart Android TV
Figures and illustrations in this manual are provided for reference only and
may differ from mactual product appearance.
Parts of the software function changes with the system upgrade.
Find what you want
This TV is equipped with a user manual and embedded E-Manual (Settings> Support> E-Manual).
E-Manual support functions
Search Find the help you are looking for.
TryNow Go directly to the function page and try it.
QR Code Scan to open the E-Manual on your mobile device.
Accessories List
The following accessories are included with TV:
- User Manual × 1
- Screw × 4
- AA or AAA Battery × 2
- Remote Control × 1
- RCA jack to AV Cable × 1(65″)
- Warranty Card × 1
- Base Stand × 2
- Power Cord × 1
- Nut × 2
NOTE
The accessories may be different from the list above due to different models, countries / regions. Please refer to the actual accessory bag.
Important Notice
Paragraphs beginning with the symbol indicate important instructions, tips or
conditions for the following settings.
For you sael safety and the betire priming any installation sure to read the
safety instructions before performing any installation.
Compatibility with 3rd party products, software and services are not
guaranteed.
We cannot be held liable for any damage or loss suffered whilst operating,
using or connecting to incompatible devices or apps.
The recording and playback of content on this or any other device may require
permission from the owner of the copyright or other such rights in that
content. It is your responsibility to ensure that your use of this or any
other device complies with applicable copyright legislation in your country.
Please refer to that legislation for more information on the relevant laws and
regulations involved or contact the owner of the rights of the content you
wish to record or playback.
Read these instructions
Follow all instructions
Heed all warnings
Keep these instructions
All rights reserved.
Safety Instructions
To ensure safe and correct use of this product, always comply with the following precautions to avoid dangerous situations and damage to your unit:
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.
Class II product : This symbol indicates that it does not require a safety
connection of protective earthing (ground).
The intended use and ambient conditions for this TV
This TV is intended for the rendering of video and audio signals, on a table-
top or wall-mounted, in a home or office environment. It must not be used in
rooms with a high level of humidity or dust concentration. The warranty is
only valid if used as intended by the manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device.
To reduce the risk of fire or electrical shock:
- Do not expose this unit to rain, moisture, dripping or splashing water, and do not place objects filled with liquids, such as vases, cups, etc. on or over the unit.
- Do not touch the TV with wet hands.
- Do not expose to direct air-conditioning and keep candles or other naked flames away from the TV at all times.
If the TV is moved from a cold environment to a hot environment, leave it
switched off for at least an hour to avoid condensation. If used outside, make
sure it is protected from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of fire, use preferably a CO2 gas or powder fire extinguisher. If such
extinguishers are not accessible, try to isolate the electrical supply before
using a water fire extinguisher.
WARNING
Stability Hazard
- A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
- ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set
- ALWAYS use furniture that can safely support the television set.
- ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
- ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
- ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
- NEVER place a television set in an unstable location.
- NEVER place the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and television set to a suitable support.
- NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
- NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
- If your existing television set is being retained and relocated, the same considerations as above should be applied.
• Moving/Transportation
Before moving this TV, disconnect all cables and move in the vertical position only. Grasp the device on the upper and lower edges of the frame.
- Do not press or put stress on the front panel of the TV. It may take two or more people to carry larger TVs.
If you have to briefly lay down the TV. place the unit with its entire front
surface lying flat on soft material.
The LED screen is made of glass and can break if is not handled properly.
Always wear rubber gloves to carry the unit. If the LED screen is damaged,
liquid crystal might leak out. In case of skin contact, immediately rinse
thoroughly with water.
Power Supply
Incorrect voltages can damage the TV. Only connect this unit to a power supply
with the correct voltage and frequency noted on the type plate, using the
supplied power cable.
The power plug must be easily accessible so that the device can be
disconnected at all time. The unit is live, even if in standby mode, as long
as the unit is connected to a power outlet.
It is recommended that this unit is placed on a dedicated circuit.
- Do not overload the power outlets by connect too many appliances to the same outlet. Overloaded wall outlets,
extension cords, etc. are dangerous and can result in electric shock and fire. After power off, don’t turn it on again in 5 seconds. Frequent switching power supply in a short period of time can cause abnormal TV.
Power plug and power cable
- Do not touch the power plug with wet hands.
- Do not place heavy objects on the power cable. Route the cable so that it is not kinked or laid over sharp edges, walked on or exposed to chemicals. A power cable with damaged insulation can cause electric shock and fire.
- Pull the power plug, NOT on the cable when disconnecting. The cable can become damaged and cause a short circuit if pulled on.
- Do not place the power cable near a high temperature object.
- Do not move the TV with the power cable plugged into a socket.
- Do not use a damaged or loose power cable, or a damaged socket outlet.
- Do not use any power cords other than the one supplied with this unit.
- MAIN plug on the power cord is used as the disconnect device, the disconnect device and socket-outlet shall be easily accessible.
Set-up
Check that the location is suitable to bear the load of the TV. Place on a level, sturdy and horizontal base. Ensure that the unit does not hang over the edge of the base when placed in or on furniture. If placed on a cart, use caution when moving to avoid the unit from tipping over.
- Place the unit in a normal upright horizontal position. It must never be operated vertically, lying flat or hanging overhead from the ceiling.
- Place the unit where it is not exposed to direct sunlight or other sources of heat.
- When mounting the TV on a wall, follow the instructions supplied with the wall-mount, make sure not to install the TV by hanging the power and signal cables on the back of the TV.
Air ventilation and high temperatures
Install your TV only where there is proper ventilation, and ensure that there is at least 10 cm free space on the sides and 20 cm above the unit for air circulation. Excessive heat and obstruction of ventilation could lead to fire or early failure of some electric components.
- Do not block any ventilation openings with newspapers, tablecloths, curtains, etc.
- Do not dry clothing etc. on top of the unit.
- Take care not to touch the ventilation openings since they may become hot.
- Do not insert foreign objects into the TV through the vents.
The Stand
- Do not use any stand other than the one supplied with this unit.
- Do not modify or use the stand if it becomes warped of physically damaged.
- During setup, make sure that all the screws are securely tightened.
- Ensure that the TV does not suffer any impact during the attachment of the stand.
- Ensure that children do not climb onto the stand.
- Attach or remove the stand with at least two people.
Prevent small items from getting into the interior of the device through the
ventilation slots. Such objects may cause short circuits, which may cause
fire.
If something should get inside the unit, immediately unplug the power plug of
the device and contact service support.
The LED screen
Despite thorough care when manufacturing this display, it cannot be 100%
guaranteed that no sub-pixel defects will occur due to technical reasons.
These cannot be considered as a device defect in terms of the guarantee. They
will not affect the performance and reliability of the TV.
To prevent “image burn”, avoid displaying still images for long periods of
time, there is a possibility that a copy of the image may remain. If the
aspect ratio is set to 4:3 for a long period of time, image burn may occur on
the black areas. Image burn is not covered by the warranty.
- Do not apply strong force or impact on the display panel.
Avoid touching the LED screen or touching it for long periods of time. Doing so may produce some temporary distortion effects on the screen.
Radio waves
- Do not use the TV in any medical institutions or locations with medical equipment. Radio waves may interfere with medical equipment and cause malfunction.
- Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves may interfere with automatic control equipment and cause malfunction. If you have a cardiac pacemaker, keep a distance of at least 22 cm from the TV. Radio waves may interfere with the operation of a pacemaker.
Built-in wireless LAN
- Do not connect to wireless networks that you do not have the usage rights for. Data transmitted and received over radio waves may be intercepted and monitored.
The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency band. To avoid malfunctions or slow response caused by radio wave interference, keep the TV away from devices such as other wireless LAN devices, microwaves, mobile phones, and other devices that use 2.4 GHz and 5 GHz signal.
Warning about off-gassing
New furniture, carpet, paint, building materials and electronics can release chemicals into the air through evaporation. After you set your TV up and turn it on for the first time, you may notice a slight smell within a couple of hours. This is because some components of TV are heating up for the first time. The materials that we use fully meet the environmental requirements and regulations. Your TV is working just fine and the fumes from the off-gassing will diminish eventually.
Supervision
- Do not let children play unsupervised close to the TV. It could tip over, be pushed off or pulled down from the stand surface and injure someone.
- Do not allow a switched-on TV to run unattended.
Volume
Loud music and noises can lead to irreversible damage to your ears. Avoid extreme volume, especially over long periods and when using headphones. If you hear a drumming noise in your ears, turn down the volume or temporarily stop using headphones.
Thunder Storms
Pull out the power plug and all connected antenna cables from the TV during a thunderstorm. Overvoltage caused by lightning strikes can damage the TV via the antenna system, as well as the wall socket.
Long periods of absence
As long as the power plug is connected to a live socket outlet, the TV will consume power even in standby mode. The power plug and all connected antenna cables should be disconnected out during long periods of absence.
Cleaning and care
CAUTION:
Unplug the power cord prior to cleaning the TV.
Clean the TV, the screen, and the remote
control with a soft, moist, clean and colour-
natural cloth only. Do not use any chemicals.
- Do not subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade the surface quality.
- Do not spray water or other liquids directly on the TV. Liquid inside the TV could lead to product failure.
- – The surface of the display panel is
treated and may be easily damaged.
Take care not to scratch it with fingernails
or other hard objects.
– Also wipe the power plug with a dry cloth
at regular intervals.
Service/Repair
Never remove the cover/back of the TV; there are no user serviceable parts inside. Refer all service to qualified service personnel.
Packaging
Keep the anti-moisture materials and plastic bags out of reach of children.
Plastic bags can cause suffocation and the anti-moisture material is harmful
if swallowed. If swallowed by mistake, force the patient to vomit and visit
the nearest hospital.
Modification
Do not attempt to modify this product in any way. Unauthorised modification could void the warranty of this unit, cause electric shock and fires.
Remote Control batteries
- Incorrect installation may cause battery leakage, corrosion and explosion.
- Replace only with the same or equivalent type.
- Do not mix old and new batteries.
- Do not mix different battery types.
- Do no use rechargeable batteries.
- Do not burn or break up batteries.
- Be sure to dispose of batteries correctly.
- Do not expose batteries to excessive heat such as sunshine, fire or the like.
Outdoor Antenna Grounding
If an outdoor antenna used, be sure the antenna system is protected against
voltage surges and built-up static charges.
Disposal
Refer to the recycling section of this manual.
INSTALLATION
CAUTION
- Be sure to disconnect the AC power cord before installing a stand or wall mount orackets.
- The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure.
- After the installation is completed, make sure the TV is steady on a table or firmly attached to a wall mount, before removing all protective film, if any.
Installing the stand
Follow the illustrations and textual instructions below to complete the
installation steps:
- Carefully place your TV face-down on a soft, flat surface to prevent damage to the TV or scratching to the screen.
- Take out the 2 stands from the accessory bag and then insert the stands into the bottom slots of the TV.
- Secure the stands to the TV with the 4 screws in accessory tightly.
Installing the wall mount bracket
Before you follow the third-party manufacturer instructions to attach the wall
mount, be sure to do the following things:
- Place the TV face down on a clean, safe and cushioned surface.
- Remove the TV stands if you have already attached them.
- Take the nuts out of the accessory bag and tighten the nuts into the holes of the back cover (See Fig. 1).
- Place spacers (not included) between the TV and the bracket (See Fig. 2).
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall
mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or
personal injury.
- Place spacers between the TV and bracket.
- Standard dimensions are shown below.
- We do not recommend hanging the TV on a slanted wall, and when wall mounting make sure your television remains parallel to the wall and does not lean forward.
NOTE
- The diameter and length of the screws differ depending on the wall mount bracket model.
- Wall mount bracket is optional. Your TV may not have wall mount bracket. Please refer to the actual accessories.
TV Front and Rear
Item | Description |
---|
Power indicator
| The light is red in standby mode. (50″/55″)
The light is white in standby mode. (65″)
Power button (Standby/Source)
| Press the power button when in standby mode, and the TV will be turned on.
Press the power button to call up the menu. When the focus is on “Power Off’, wait for 3 seconds, and then the TV will go into standby mode automatically.
Press the power button to call up the menu, and then select among the different input signal sources.
NOTE
- ANT2 Jack supports power supply for satellite antenna (13/18V, 0.5A max.)
- Check the jacks for position and type before making any connections. Loose connections can result in image or colour problems. Make sure that all connections are tight and secure.
- Not all A devices have the ability to connect to a TV, please refer to the user’s manual of your AN device for compatibility and connection procedures.
- Before connecting external equipment, remove the mains plug from the wall socket. Otherwise, it may cause electric shock.
- Powering on the TV requires several seconds to load programmes. Do not rapidly tum the TV off as it may cause the TV work abnormally.
- The Picture is Only for Reference.
Connection
Terminals
NOTE
Excesses and head pressure ause hearing loss.
NOTE
- Do not repeatedly insert or remove the Common Access Module as this may damage the interface and cause a malfunction.
- You must obtain a Cl+ module and card from the service provider of the channels you want to watch.
- CI+ is not supported in some countries and regions.
NOTE
- Exceeding a total current consumption may result in damage. The USB 1.1 and maximum eire consumption is 14 ony or some modes,. The US 3.0 device
- For individual non-standard high-capacity mobile hard disk, if its impulse current is greater than or equal 1A, it may cause TV-rebooting or self-locking. So the TV does not support it.
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the illustration below.
- It is recommended to use a modem or router that supports Dynamic Host Configuration Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS, so you don’t have to enter them manually. Most home networks already have DHCP.
Wireless setup
To connect your TV to your network wirelessly, you need a wireless router or
modem. See the illustration below.
- The built-in Wireless LAN Adapter supports the IEEE 802.11a/b/g/n/ac communication protocols. It is recommended to use IEEE 802.11ac router. Low transfer rates for b/g may have the influence on the quality of streamed videos and other media.
NOTES
- You must use the built-in Wireless LAN Adapter to use a wireless network because the set doesn’t support external USB network adapters.
- If the wireless router supports DHCP, your TV can connect more easily to the wireless network.
- If you apply a security system other than the systems listed below, it will not work with the TV. Security system: WPA, WEP, WPA2.
- In order to guarantee smooth network, the distance between router and TV should be less than 10 metres.
Remote Control
NOTE: The included remote control will vary depending on model, country/region. Check information according to the actual remote control in the accessory bag.
Buttons of remote control
Installing Batteries in the Remote Control
NOTE
- Product image is only for reference, actual product may vary in appearance.
- Dispose of your batteries in a designated disposal area.
- Do not mix battery types or combine used batteries with new ones.
- Remove depleted batteries immediately to prevent battery acid from leaking into the battery compartment.
- If you do not intend to use the remote control for a long time, remove the batteries.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
- Risk of fire or explosion if the battery is replaced by an incorrect type. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
- battery, that can result in an explosion.
- A battery subjected to extremely low air pressure that may result in an explosion or\ the leakage of flammable liquid or gas.
Pairing the Remote Control (only for Bluetooth remote control)
Pair the remote to the TV after you power it on. Keep the remote control within 3 metres from the TV. Press any button (except power and mic button) to pair.
NOTE
- In special cases, press and hold [ ] button to pair. in arence Try to remove aris using the interfere not and pari agaaused by interference.
- If an unknown error occurred in the remote control while the battery power is normal, you can take out the batteries, press any key for 1~2 seconds, and insert them back. Then the remote control will work normally.
- The remote cannot be paired to the TV while the TV is in standby mode.
Remote Control Operation Range
- The remote control can work at a distance of up to 8 meters in front of the TV set.
- The remote control angle: taking the remote sensor as an apex, 6 meters away, its controlled horizontal angle is within ‡30°, while the vertical angle is within #15°.
- The operating distance may vary depending on the brightness of the room.
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste.It should be packed and handed over to authorised re-cycler.
Specifications
Features, appearance and specifications are subject to change without notice.
Item | 50″ | 55″ |
---|
Dimension
CH x H x D)
| Without Stand| 44.1 x 25.6 x 3.1 inches (1119 x 649 x 80 mm)| 48.5 x
28.1 x 3.1 inches (1233 x 715 x 80 mm)
With Stand| 44.1 x 27.6 x 10.8 inches (1119 x 702 x 274 mm)| 48.5 x 30.2
x 10.8 inches (1233 x 767 x 274 mm)
Weight
| Without Stand| 20.9 lbs (9.5 kg)| 24.0 lbs (10.9 kg)
With Stand| 22.0 lbs (10.0 kg)| 24.3 lbs (11.0 kg)
Active Screen Size (Diagonal)| 126cm| 139cm
Screen resolution| 3840 X 2160| 3840 X 2160
Audio power| 8W+8W| 8W+8W
Operating mode power density| 0.018 Watts/cm2| 0.016
Watts/cm2
Power consumption when turned off| N.A.| N.A.
Power consumption in standby mode| 0.5W| 0.5W
Power consumption| Please refer to the rating label.
Power supply| Please refer to the rating label.
Receiving systems| Analog| PAL-D/K, B/G, I, SECAM-D/K, B/G
Dlgltal| DVB-T/T2, DVB-C, DVB-S/S2
Wireless LAN Module
specifications
| Frequency Range| 2.4-2.4835GHz
5.15-5.85GHz
Output Power (Max.)
| 2.4-2.4835GHz 17dBm
5.15-5.25GHz 14dBm
5.25-5.35GHz(DFS Band) 14dBm
5.49-5.71GHz(DFS/TPC Band) 14dBm
5.725-5.85GHz(for Non EU) 14dBm
Bluetooth Module specifications| Frequency Range| 2.4-2.4835GHz
Output Power (Max.)| 2.4-2.4835GHz,Class1,6dBm
Envlronmental conditions
| Temperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RH
Atmospheric pressure: 86 kPa – 106 kPa
HDMI Input
| RGB / 60Hz (640×480, 800×600, 1024×768) YUV / 60Hz (480i, 480p, 720p, 1080i, 1080p) YUV / 50Hz (576i, 576p, 720p, 1080i, 1080p) 3840×2160 / 24Hz, 3840×2160 / 25Hz,
3840×2160 / 30Hz, 3840×2160 / 50Hz,
3840×2160 / 60Hz
Item | 65″ |
---|
Dimension (W x H x D)
|
Without Stand
| 57.2 x 33.1 x 3.0 inches (1453 x 840 x 76 mm)
With Stand
| 57.2 x 35.3 x 11.8 inches (1453 x 897 x 299 mm)
Weight
| Without Stand| 33.1 lbs (15.0 kg)
With Stand| 33.5 lbs (15.2 kg)
Active Screen Size (Diagonal)| 164cm
Screen resolution| 3840 X 2160
Audio power| 10W+ 10W
Operating mode power density| 0.014 Watts/cm2
Power consumption when turned off| N.A.
Power consumption in standby mode| 0.5W
Power consumption| Please refer to the rating label.
Power supply| Please refer to the rating label.
Receiving systems| Analog| PAL-D/K, B/G, I, SECAM-D/K, B/G
Dlgltal| DVB-T/T2, DVB-C, DVB-S/S2
Wireless LAN Module
specifications
| Frequency Range| 2.4-2.4835GHz
5.15-5.85GHz
Output Power (Max.)
| 2.4-2.4835GHz 17dBm
5.15-5.25GHz 14dBm
5.25-5.35GHz(DFS Band) 14dBm
5.49-5.71GHz(DFS/TPC Band) 14dBm
5.725-5.85GHz(for Non EU) 14dBm
Bluetooth Module specifications| Frequency Range| 2.4-2.4835GHz
Output Power (Max.)| 2.4-2.4835GHz,Class1,6dBm
Envlronmental conditions
| Temperature: 41°F – 95°F (5°C – 35°C) Humidity: 20% – 80% RH
Atmospheric pressure: 86 kPa – 106 kPa
HDMI Input
| RGB / 60Hz (640×480, 800×600, 1024×768) YUV / 60Hz (480i, 480p, 720p, 1080i, 1080p) YUV / 50Hz (576i, 576p, 720p, 1080i, 1080p) 3840×2160 / 24Hz, 3840×2160 / 25Hz,
3840×2160 / 30Hz, 3840×2160 / 50Hz,
3840×2160 / 60Hz
Other Information
Recycling/Licenses
WEEE (Waste Electronic Electric Equipment) European Directive 2012/19/EU This
symbol on the product or on its packaging indicates that this product must not
be disposed of with your household waste. Instead, it is your responsibility
to dispose of your waste equipment by handing it over to a designated
collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural resources and ensure that
it is recycled in a manner that protects human health and the environment. For
more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Batteries In accordance with the Battery Directive, used batteries should not be disposed of in the domestic waste. Dispose your batteries in the collection containers specific for this purpose in retail stores.
ROHS (Restriction of Hazardous Substance) European Directive 2011/65/EU
This European directive limits the use of dangerous and hazardous substances
which are difficult to recycle.
This allows recycling easily the EEE and contributes to the safeguard of the
environment.
Substances included in this product match to the RoHS directive.
The terms HDMI and HDMI High-Definition Multimedia Interface, and Licensing Achinst main the unted stres and oter counties. Dolby, Dolby Vision, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 1992-2022 Dolby Laboratories. All rights reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, DTS:X, Virtual:X, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2021 DTS, Inc. ALL RIGHTS RESERVED.
EPREL Registration Information
Model identifier
50A6K
| Eprel registration number
1440880
| Model identifier
55A6K
| Eprel registration number
1436975
---|---|---|---
50A67K| 1440902| 55A67K| 1436978
50A68K| 1440906| 55A68K| 1436980
50A69K| 1440908| 55A69K| 1436983
50E6KT| 1440915| 55E6KT| 1436984
50E61KT| 1440918| 55E61KT| 1436985
50E62KT| 1440922| 55E62KT| 1436987
50E63KT| 1440928| 55E63KT| 1436991
50A6KTUK| 1440930| 55A6KTUK| 1437000
50A67KTUK| 1440935| 55A67KTUK| 1437003
50A68KTUK| 1440938| 55A68KTUK| 1437005
50A69KTUK| 1440942| 55A69KTUK| 1437010
50E6KTUK| 1440945| 55E6KTUK| 1437011
50E61KTUK| 1440950| 55E61KTUK| 1437015
65A6K| 1435092| 65E63KT| 1435336
65A67K| 1435310| 65A6KTUK| 1435341
65A68K| 1435312| 65A67KTUK| 1435343
65A69K| 1435317| 65A68KTUK| 1435346
65E6KT| 1435320| 65A69KTUK| 1435350
65E61KT| 1435325| 65E6KTUK| 1435352
65E62KT| 1435333| 65E61KTUK| 1435356
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ERF2F36H / ERF2J36H / ERF2K36H / ERF2L36H / ERF2M36H / ERF2N36H / ERF2036H / ERF2P36H / ERF2S36H / ERF3N80H / 50A6K / 50A67K / 50A68K / 50A69K / 50E6KT / 5061KT / 5062KT / 5063KT / 50A6KTUK / 50A67KTUK / 50A68KTUK / 50A69KTUK / 50E6KTUK / 50E61KTUK / 55A6K / 55A67K / 55A68K / 55A69K / 55E6KT / 55E61KT / 55E62KT / 55E63KT / 55A6KTUK / 55A67KTUK / 55A68KTUK / 55A69KTUK / 55E6KTUK / 55E61KTUK / 65A6K / 65A67K / 65A68K / 65A69K / 65E6KT / 6561KT / 65E62KT / 65E63KT / 65A6KTUK / 65A67KTUK / 65A68KTUK / 65A69KTUK / 65E6KTUK / 6561KTUK] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://global.hisense.com/support/certificate-download/.
For Great Britain:
SIMPLIFIED UK DECLARATION OF CONFORMITY
Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ERF2F36H / ERF2J36H / ERF2K36H / ERF2L36H / ERF2M36H / ERF2N36H / ERF2036H / ERF2P36H / ERF2S36H / ERF3N80H / 50A6K / 50A67K / 50A68K / 50A69K / 506KT / 50E61KT / 50E62KT / 50E63KT / 50A6KTUK / 50A67KTUK / 50A68KTUK / 50A69KTUK / 50E6KTUK / 50E61KTUK / 55A6K / 55A67K / 55A68K / 55A69K / 556KT / 5561KT / 55E62KT / 55E63KT / 55A6KTUK / 55A67KTUK / 55A68KTUK / 55A69KTUK / 55E6KTUK / 55E61KTUK/ 65A6K / 65A67K / 65A68K / 65A69K / 65E6KT / 65E61KT / 65E62KT / 65E63KT / 65A6KTUK / 65A67KTUK / 65A68KTUK / 65A69KTUK / 656KTUK / 6561KTUK] is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://global.hisense.com/support/certificate- download/.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>