PIMA RXN-400 Keypad Hunter-Pro Security System User Manual
- June 13, 2024
- PIMA
Table of Contents
PIMA RXN-400 Keypad Hunter-Pro Security System
Product Information
The RXN-400/410 Hunter-Pro keypads are silicon-rubber keys LCD keypads designed specifically for the Hunter-Pro security system. They are part of the product package and come with a limited warranty. For complete information on the installation and usage of the keypads, please refer to the Hunter-Pro’s Installation Guide.
Technical Specifications
- Keypad Type: Silicon-rubber keys LCD keypad
- Compatibility: Designed for use with the Hunter-Pro security system
Content of the Product Package
- RXN-400/410 Keypads
Ordering Information
- RXN-400: [Insert specific ordering information]
- RXN-410: [Insert specific ordering information]
Limited Warranty
Please read the enti e guide before attempting to program or operate your system. If you have any misunderstandings or questions regarding any part of the guide, please contact the supplier or installer of this system.
Manufactured by PIMA Electronic Systems Ltd.
Website: www.pima-alarms.com
Addres 5 Hatzoref Street, Holon 5885633, Israel
Tel +972.3.6506411
Email support@pima-alarms.com
Product Usage Instructions
- Insert a slotted screwdriver into the notches on the bottom of the keypad, press gently, and remove the backplate.
- Pass the BUS wires through the opening at the backplate.
- Using the mounting holes, mount the backplate on a flat surface.
- Connect four wires (not supplied) between the keypad 1-4 terminals and the control panel’s SecuBus BUS terminals. Each wire should connect between terminals with the same number (1 1, 2-2, etc.).
- Attach the keypad to the mounted backplate, starting with the top side, and press until it clicks into place.
RXN-400/410 Keypads
- RXN-400/410 are silicon-rubber keys LCD keypads, designed for the Hunter-Pro security system.
- The only difference between RXN-400 and RXN-410 is the LCD size – RXN-410 has larger LCD display. In the following paragraphs the term RXN-400 refers to RXN-410 also.
- The two keypads connect over the bus. Up to 16 keypads can be connected to the Hunter-Pro.
- The RXN-400 has a modern and sleek design that fits every indoor decoration.
- The keypad has two LEDs – Arm and Fault – and a buzzer for various panel status indications.
- The keypad has settings for backlight, buzzer on/off and ID No., and a tamper switch for detecting the opening of the enclosure. For complete information, see the Hunter-Pro’s Installation Guide.
Technical specifications
- Screen size: 2X16 lines
- Data Voltage levels: 0, +12V
- Operating Voltage Range: 9-14 VDC
- Current Consumption: 50mA idle, 90mA max.
- Sizes: 15 x 12 x 3cm
- Weight: 235gr
- CE compliance
- Operating Temperature: °C -10 to +55
Content of the product package
• RXN-400/410 keypad • Installation guide
How to install the RXN400/410 keypad Follow the next steps to connect the keypads.
- Insert a slotted screwdriver to the notches on the keypad’s bottom, press gently and remove the backplate.
- Pass the BUS wires through the opening at the backplate.
- Use the mounting holes and mount the backplate on a flat surface.
- Use the supplied terminal block and connect four wires (not supplied) between the keypad 1-4 terminals and the control panel’s SecuBus BUS terminals: each wire connects between terminals with the same number (1-1, 2-2, etc.).
- Attach the keypad to the mounted backplate, top side first, and press until clicked.
Ordering Information
RXN-400
- Spanish P/N 8410022
- English P/N 8410019
RXN-410
- P/N 8410027
- P/N 8410024
Limited Warranty
PIMA Electronic Systems Ltd. does not represent that its product may not be
compromised and/or circumvented, or that the Product will prevent any death,
personal and/or bodily injury and/or damage to property resulting from
burglary, robbery, fire or otherwise, or that the Product will in all cases
provide adequate warning or protection. The User understands that a properly
installed and maintained equipment may only reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a
guarantee that such will not occur or that there will be no death, personal
damage and/or damage to property as a result. Read this guide in its entirety
before attempting to program or operate your system. Should you misunderstand
any part of this guide, please contact the supplier or installer of this
system. Copyright © 2023 PIMA Electronic Systems Ltd. All rights reserved.
E&OE
Manufactured by
PIMA Electronic Systems Ltd.
WWW.PIMA-ALARMS.COM
5 Hatzoref Street, Holon 5885633, Israel.
Tel +972.3.6506411
Email support@pima-alarms.com
References
- Alarms.com
- Pima Electronic Systems | Residential & Commercial Security Systems
- Pima Electronic Systems | Residential & Commercial Security Systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>