TRAPINATOR DOC150 Strangford DOC 150 Trap and Tunnel Combi Instruction Manual

Table of Contents

Housing: The housing is a component of the Mustelid Trap that provides a structure for the trap and holds all the other parts together.
Kill Trap: The kill trap is a part of the Mustelid Trap that is designed to effectively catch and kill mustelids, such as weasels or stoats.
Nuts, Bolts, and Screw: These are provided as fastening materials to assemble the Mustelid Trap.
Bait Cover: The bait cover is an optional component of the Mustelid Trap that can be used to hold bait for attracting mustelids.
Housing Base: The housing base is the bottom part of the housing that provides stability to the Mustelid Trap.
Screw Driver (not included): A screwdriver is required for assembly but is not included with the product.
Different Mesh Screens: The Mustelid Trap comes with three different mesh screens that can be used to cover various openings of the trap for effective trapping.
Clips: There are six clips provided with the Mustelid Trap that are used to secure the mesh screens in place.
Safety Clip: The safety clip is an additional component provided for extra safety while using the Mustelid Trap.

Select the mesh screen with a 5 x 5 square cut-out window and position it to match the cut-out of the tunnel top front entrance.
Continue fitting the remaining mesh screens.
Insert the 6 x 5 square cut-out screen to the center position on the opposite side of the front entrance.
Use the provided screen clips to secure the screens in place. The end screens should be located in the outer clip positions, while the center screen should be located in the middle clip position.
Insert the nuts into the correct holes to match either a Doc150 or a Doc200.
Use the provided screws to secure the tunnel cover over the hinge of the trap to the base.
Warning: The Mustelid Trap is dangerous and should be used at your own risk.
The base of the trap has options for either an egg holder or a bait cover. Choose the appropriate option based on your trapping needs.

For more information, please visit www.trapinator.com.

Select the screen with a 5 x 5 square cut out window, and position it to match the cut-out of the tunnel top front entrance. Continue to fit remaining screens.
Insert 6 x 5 square cut out screen to the center position, opposite side of front entrance. Screen clips have 3 location points. Both end screens locate to the outer clip position with the center screen to the middle clip position.
With the nuts provided insert into correct holes to match either a Doc150 or a Doc200.
Use the screws provided and secure the trap to the base.
Fit tunnel cover over hinge
Base has either egg holder or bait cover options.

Warning: Trap is dangerous. Use at your own risk.

Read User Manual Online (PDF format)