FRESH N REBEL 6ATAG3 GPS Smart Finder User Manual

: June 13, 2024
: FRESH N REBEL

Table of Contents

Specifications
Overview (Image A)
Getting Started
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

FRESH N REBEL 6ATAG3 GPS Smart Finder User Manual

Specifications

Fresh ‘n Rebel Smart Finder 6ATAG3 v1 001

Find My-enabled Smart Finder, accelerometer, speaker for beeping sounds, replaceable battery, battery life up to 10 months, working voltage 1.9 V ~ 3.6 V

System requirements and compatibility: Apple ID, iPhone models with iOS 14.5 or later, iPad models with iPadOS 14.5 or later To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.

Contents: Smart Finder, pre-installed CR-2032 battery, keychain, Quick Start Guide

Overview (Image A)

Product Overview

Function button
Speaker
Battery cover groove
Keychain connection hole

Getting Started

IMPORTANT: Update to the latest version of iOS or iPadOS and turn Bluetooth on

Remove the Smart Finder’s battery film by pulling it out to connect the battery.
Press the function button once to power on your Smart Finder. You will hear a chime.
Open the Apple Find My app on your supported iPhone or iPad.
Tap +, then “Add Other ltem”.
Once your 6ATAG3 is located, tap “Connect”.
Enter a name, select an emoji for your Smart Finder and tap “Continue’’.
Tap “Agree” to add the Smart Finder to your Apple ID.
Tap “Finish” and your Smart Finder will be set up and ready to be used.

If the Smart Finder is not added to an Apple ID within 10 minutes after powering it on, it will automatically power off again. Repeat step 2 to 8 if that happens

Locate your Smart Finder when it is nearby

Open the Apple Find My app and select the “Items” tab.
Tap on your Smart Finder from the list.
Tap “Play Sound” to make your Smart Finder beep.
Tap “Stop Sound” to stop the beeps.

Locate your Smart Finder on a map

Open the Apple Find My app and select the “Items” tab.
Tap on your Smart Finder from the list.
Your Smart Finder’s location will appear on the map with a time stamp.
To navigate to the location, tap “Directions” to open Apple Maps.

Notify When Left Behind

Open the Apple Find My app and select the “Items” tab.
Tap on your Smart Finder from the list.
Under “Notifications” enable the “Notify When Left Behind” toggle.
You will receive a notification when you leave your Smart Finder behind and it is no longer in range of your device.

Notify When Found

Under “Notifications”, enable the “Notify When Found” toggle.
When your Smart Finder is seen by another Find My network device, you will receive a notification of its location.
Note : Notify When Found can only be activated when your Smart Finder is out of range.

Lost Mode

Open the Apple Find My app and select the “Items” tab.
Tap on your Smart Finder from the list.
Under “Lost Mode” tap “Enable”.
A screen detailing Lost Mode will pop up, tap “Continue”.
Enter your phone number or email address and tap “Next”.
You may enter a message that will be shared with the person that finds your item.
Tap “Activate” to enable “Lost Mode”.
Note: When Lost Mode is enabled, Notify When Found is automatically enabled. When Lost Mode is enabled, your Smart Finder is locked and cannot be paired to a new device.

**** The Apple Find My network uses advanced encryption to ensure that no one else, not even Apple or Sitecom Europe B.V., can view the location of your Smart Finder. If any Apple Find My network accessory separated from its owner is seen moving with you over time, you will be notified.

Reset

Remove the Smart Finder from the Apple Find My app:

Open the Apple Find My app and select the “Items” tab.
Tap on your Smart Finder from the list.
Ensure “Lost Mode” is disabled.
Scroll to the bottom of the screen and tap “Remove ltem”.
A summary will open, tap “Remove” to confirm. Reset your Smart Finder: After removing the Smart Finder from the Apple Find My app, press the Smart Finder’s function button four times rapidly and then hold it a fifth time until you hear a ringing chime. The Smart Finder is now reset and ready to be paired to a new Apple ID. To turn your Smart Finder off, hold the function button for at least three seconds. You will hear two beeps to indicate that your Smart FInder is powered of.

Replacing the battery (Images B)

Installation Instruction

Carefully open the battery cover groove with two hands or a small tool.
Replace the battery with a new CR2032 with positive side (+ symbol) up.
Put the cover back in its place, press the bottom and top together on each side to close the Smart Finder.

WARNING Always follow all instructions and warnings closely. Do not expose to liquids. Do not use or store in damp, humid or wet environments. Do not expose to excessive heat or open fire. Avoid abrupt changes in temperature. Do not burn or incinerate.
CAUTION: This product contains a button cell battery. Do not swallow or disassemble the battery. Swallowing the battery can result in severe internal burns within just 2 hours and death in severe cases. Keep batteries away from infants and children. If the battery compartment does not close securely, stop using the product and keep it away from infants and children. If you think the batteries might have been swallowed or inserted inside any part of the body, seek immediate medical attention.

The packaging materials have been selected for their environmental friendliness and are recyclable Dispose of packaging materials which are longer needed in accordance with applicable local regulations.

PACKAGING RECYCLING

Covers| Blister
Paperboard| Plastic
|
PAPER COLLECTION| PLASTIC COLLECTION

Copyright 2023 Sitecom Europe B.V. All rights reserved. The Fresh ‘n Rebel word mark and logo are registered trademarks owned by Sitecom Europe B.V. The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find Items app on Apple Watch.

Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.

Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.

Symbol