iKEON i-Series Smart Gang Light Switches With Dimmer Owner’s Manual
- June 13, 2024
- iKEON
Table of Contents
iKEON i-Series Smart Gang Light Switches With Dimmer
Wiring your
iKEON Smart Accessory
The above diagram depicts the i-Series QUARTET (Four-button) Dimmer.
Use the same wiring order for SOLO, DUO & TRIO Dimmers.
Installing your
Installation
Mount the unit with the provided mounting screws.
After installation, insert the silicone screw caps included in the packaging
and press firmly until they are level with the frame. Lastly, attach the front
magnetic cover.
Get to know your
Features
Advanced features & functionality
Prerequisites
Before you begin
- Connect your iPhone or iPad to your home 2.4G WiFi.
- Log in to your iCloud account.
- Enable iCloud Keychain.
- Download the iKEON app from the AppStore.
Need help with creating your iKEON home?
You can find a comprehensive guide at:
https://ikeon.com.au in the support section.
Alternatively, you can call us on 1800 900 990
iPhone and iPad are trademarks of Apple Inc, registered in the U.S and other countries. App Store and iCloud are service marks of Apple Inc., registered in the U.S. and other countries.
Note: For security reasons, you have 10 minutes after powering your iKEON accessory for the first time to add it to your home. After the 10 minutes have elapsed, you must reset your iKEON accessory to set it up. (See Resetting your iKEON Smart Accessory)
Warning : All electrical installations must be performed by a licensed electrician.
Resetting your iKEON Smart Accessory
Steps
- Remove the front cover.
- Locate the Reset pinhole.
- Get a small pin.
- Press and hold for 5 seconds.
Upon successful reset, your accessory will flash a few times.
Unique features
First time added in light switches
Water resistant
Making sure everyone stays safe.
Your iKEON dimmer is the safest light switch available.
Wet hands? No problem.
We design the front cover in such a way as to make it water-resistant, the
perfect companion in the kitchen,bathroom or wet areas.
Hardware Lock System
Safety x2.
We believe that safety is peace of mind. That is why we have added another layer of safety. The iKEON App provides several intuitive ways to achieve that.
Locking a device is as easy as tapping the ‘Safety Lock’ button and entering a 4-digit key. Your iKEON accessory locks to its current state.
At a glance, you can check the lock state of your iKEON accessory by a small
red LED indicator on the top left corner.
Hardware Timer
Every second counts.
Set a timer to turn On or Off any iKEON accessory.
You can set a timer from 1 minute to 24 hours.
A small red LED indicator on the top left corner will start flashing when a timer is active, indicating that a timer has been set.
Temperature & Humidity Sensors
Effortless comfort.
Automatically adjust the conditions in every room or trigger an automation
based on temperature and humidity.
For example, turn on a ceiling fan when the temperature exceeds 26°C or turn
on a humidifier when the humidity is below 45%.
Other features
Last but not least
Power Consumption Monitor
Knowing your energy footprint.
With power consumption sensing capabilities, it’s easy to monitor how much power each device consumes through comprehensive charts. Check the power consumption of each accessory, each room, the whole house or multiple locations.
With a tap of your finger, you can switch from power consumption to temperature or humidity charts for the current day, week, month or year. You can also get statistics for a specific day or a custom range.
Knowing is never enough. You should be able to export the collected data from
your iKEON accessories for further processing. Export your home data to Excel
or CSV format to analyse them further.
Multicolour LED Buttons
Get into the mood.
Select from a virtually unlimited palette of colours, the one that expresses your mood or personality.
Change the colour of all iKEON accessories at once or individual accessories
to create a seamless or playful home environment.
Single Button Dimmer
Do more with less.
All iKEON light switches provide dimming functionality through a simple yet intuitive gesture. Tap once to turn your lights on or off, and tap & hold to increase or decrease the brightness.
Another technological achievement of the iKEON light switches is that you can retrofit them in any existing installation without the need for a neutral wire*.
- There is a minimum load requirement for operation without a neutral wire. Please refer to the iKEON website for details.
Thank you..
For choosing iKEON Smart Accessories.
We endeavour to create the most reliable, innovative and long-lasting smart
products.
To achieve the required manufacturing quality and precision, we designed all
iKEON products in Australia and manufactured them using premium electronic
components.
Tell us what you think.
Send your feedback through the iKEON App or the iKEON website. We’d love to
hear from you.
Need help?
Try our support pages on https://ikeon.com.au
If you prefer, give us a call on 1800 900 990, we are here to help