MIPRO MP-10 Booster Relay Power Supply User Guide
- June 13, 2024
- MIPRO
Table of Contents
MIPRO MP-10 Booster Relay Power Supply User Guide
I. Parts Name
- RF Input: Connect to antenna and provide 8 VDC bias to antenna booster.
- RF Output: Connect to receiver or extended cable and antenna booster. No bias at this point.
- DC IN Socket: Connect to 12 VDC. Center pin of socket is positive (+) voltage.
II. Application
Power Supply for Antenna Combiner
All rights reserved. Do not copy or forward without prior approvals of MIPRO.
Specifications and design subject to change without notice. YM 023/03
III. DC Power Cable Connection
Insert and wrap cable according to the diagram for a firm and secure connection to a MP-10.
Note: Refer to the actual product in the event of product description discrepancy.
Disposal
Dispose of any unusable devices or batteries responsibly and in accordance
with any applicable regulations.
Disposing of used batteries with domestic waste is to be avoided!
Batteries / NiCad cells often contain heavy metals such as cadmium(Cd),
mercury(Hg) and lead(Pb) that makes them unsuitable for disposal with domestic
waste. You may return spent batteries/ accumulators free of charge to
recycling centres or anywhere else batteries/accumulators are sold.
By doing so, you contribute to the conservation of our environment!
www.mipro.com.tw
mipro@mipro.com.tw
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>