CARSON KL-20 LED Flashlight with Hook and Stand Instruction Manual
- June 13, 2024
- Carson
Table of Contents
KL-20
LEDFlashlight
LED Lighted Flashlight with Hook and Stand 
Congratulations on selecting your new LED Lighted Flashlight! In order to achieve optimum performance, please follow instructions for proper use.
PRODUCT SPECIFICATION
| Weight: | 0.05 lbs | Batteries: 3 AAA (not included) |
|---|---|---|
| Dimensions: | 1.9″ x 0.6″ x 3.3″ |
INSERTING BATTERIES
- Use small slot to lift and remove battery door.
- Insert three AAA battery following the polarity indicator marked inside the battery compartment, then reattach door.
WARNING
Use only alkaline batteries. Mixing old and new, different brands or types
within brands may cause batteries to leak, overheat or explode. Keep away from
fire or excessive heat. Inspect batteries for corrosion or leakage. Insert in
direction indicated. Rechargeable batteries not recommended.
USING FLASHLIGHT
- Press button to turn ON.
- Press again to switch to high mode.
- Press a third time to switch to strobe, which can be used in emergency situations.
- Press again to turn light off.
- Press and hold button for 2 seconds to activate red light at any point in mode cycle.
- Press button to turn red light OFF.
Customer Service: If you experience any difficulties, please contact us and we will be happy to help you. For warranty information, visit www.carson.com/warranty
info@carson.com
uksupport@carson.com
eusupport@carson.com
www.carson.com
Carson Optical 2070 5th Avenue,
Ronkonkoma, NY 11779
631-963-5000
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>