GALAXIA 6×6 DUAL V QUATTRO Giant Retractable Umbrella Instruction Manual

GALAXIA
QUATTRO 6×6
DUAL V 3×6
DUAL T 3×6 – 3,5×7https://www.youtube.com/watch?v=-eCkoVl_AqQ

ASSEMBLING INSTRUCTION

BEFORE USING, DIRECTIONS FOR USE HAS TO BE READ CAREFULLY

We thank you for choosing our products. You have purchased an article that is the result of over 40 years’ experience in the production of umbrellas and a 100% Made in Italy production process, that is entirely performed in the company Scolaro. This model represents the most advanced product on the market, which allows the opening / closing assisted by gas spring. Our products are sold in more than 70 countries all over the world and are suitable to resist in the most different weather and climatic conditions such as rain, humidity, wind, sun, etc. Below the instructions for a correct assembly and some tips for a correct use and maintenance to ensure a long life and a better functionality of the umbrella.

Fig. 1

1. Open all the cartons, place the base (2) on the ground and load it with the concrete plates (1) 50×50 cm (not included).
   Fig. 2

2.  Position the parasol pole (3) incl. the square iron tube into the base (2). Fasten with foreseen screws (4).
   Fig. 3A – 3B

3. Hook the final part of the upper arm of one of the parasol, as shown in the picture, on the upper connection (7) already provided on the column (3) by inserting the two gasket washers in the foreseen position, then fasten using a bushing with the screws (6).

Fig. 4 – Fig. 5

4.  Lift the sunshade up to the horizontal position (operation to be carried out in 2 persons), insert the gas spring attachment (8)  into the proper centering hole and tighten the  screws (9) provided.
   Fig. 6

5. Hook the lower arm (10) to the fixing point on the sliding carriage (11) and fix using the other bushing with the screws (6).

6. Repeat the same operations for the other sunshades where the upper connections (7) of the column (3) are already provided.
   

INSTRUCTIONS FOR USE

Fig. 9
Opening fixing / unfixing Opening locking / unlocking

DIRECTIONS FOR USE
1. Take the parasol string away, move the ribs to make easier the opening.
2. For this parasol a ballast of 260 kg is required. The cement plates or pots can be found easily or are available in our range of optional items. See items:
BC5050 – BC5151 – BC5151G – BV5050G – BV5050B.
In case of particular environments or special atmospheric condition it could be necessary to increase the ballast. ADDITIONAL INFORMATION IN THE DEDICATED BROCHURE SECTION.
The company Scolaro, its staff and all retailers are at your disposal for any further information and technical assistance.

• Before use, directions and assembling instructions, which are inside the package, have to be kept and read carefully.
• The base has to be ballasted. An insufficient weight will seri- ously compromise the stability of the parasol.
• To avoid damage or personal injury, parasol must be closed and removed from the support when unattended and/or in windy conditions. Remember always that the parasol is not a fixed construction.

The company Scolaro cannot be held responsible for damage to goods supplied, persons or property resulting from misuse and failure to follow instructions and guidelines on indications.

MAINTENANCE

FABRIC

• The fabric is waterproof and anti mould treated to reject water, spots and grant transpiration. Please follow our maintenance instruction to grant the long lasting of the fabric:
  – Remove often dust deposits, spots and any type of dirt in order to avoid trails after cleaning.
  – It’s very important to close the parasol only when it is perfectly dry. During the winter and when the parasol is not employed, it has to be stored in dry environment.

COMPONENTS

• The steel components, screws and accessories are anti rust treated. Anyway for a long lasting of the parasol, during the winter and when the it is not employed, the parasol has to be stored in dry environment.
• During ever y season it is necessar y to check the functionality of all components, especially after a long period of non-employ.

ASSISTANCE + WARRANTY

• During the warranty period, in case of damages caused by production faults, the company Scolaro grants as sistance, supplies spare parts without any charge, or, if necessary, replaces the complete parasol.
• After the warranty period, the company Scolaro can grant assistance through its resellers or also directly for many years after the sale, by supplying spare parts or repairing the parasol.
• For further information about warranty or materials, please visit our website (www.scolaro-parasol.it) or consult our catalog.

www.scolaro-parasol.it · info@scolaro- parasol.it

References

• Parasol
• Ombrelloni da giardino | Produzione Vendita Ombrelloni | Bar | Dehor

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>