thdstatic W-13 YF Thermostatic Shower Installation Guide
- June 13, 2024
- thdstatic
Table of Contents
- Warranty Duration
- Installation Condition
- Three-Function Water Separation Shower Set Model: A
- Three-Function Water Separation Shower Set Model: B
- Three-Function Water Separation Shower Set Model: C
- Installation Depth Of Main Body (Model: A&B&C)
- Piping Instructions Before Tiling(Model: A&B&C)
- Main Body Valve Installation(Model: A&B&C)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Thermostatic shower series
Installation guide
W-13(YF)
Warranty Duration
Ail parts of this faucet system are warranted to the original purchaser to be free from defects in material and workmanship for a lifetime.
Repair and Replacement
If the product has defects in material and workmanship within the warranty period, we will repair or replace the product free of charge. However, you may be required to provide the invoice when requesting repairs or replacement from us.
Exclusions
We shall not be responsible for the following cases:
- Damage to the product caused by improper installation, misuse, unauthorized repair or replacement, or abuse(including damage during shipment).
- Damage to the product caused by improper dismantlement after installation.
- Damage resulting from abnormal water pressure and impurities in water pipes is not covered under this warranty.
- Rust on the product due to insufficient care and maintenance is not covered under this warranty.
- Damage caused by natural disasters such as fire, flood, earthquake, electric storms, etc., is not covered under this warranty.
| hope this helps! If you have any further questions or concerns, please let me know.
Having Trouble? Contact us.
Email: [email protected]
Toll Free: 1-888-969-6880
Installation Condition
- Check the accessories list to verify that all parts are complete in this package.
- Do not disassemble the main body by yourself.
- Connect inlet pipes to supply valves.
- Make sure inlet pipes and supply valves have no impurities and are cleaned, with no impurities in the pipeline.
- After installation, check all joints for leakages.
- Do not leave the rain shower system exposed to a severely corrosive environment.
Three-Function Water Separation Shower Set Model: A
Accessories List
| No. | Part name | Qty | No. | Part name | Qty |
|---|---|---|---|---|---|
| 1 | Shower head | 1 | 12 | Water diverter | 2 |
| 2 | Shower arm | 1 | 13 | Deck plate | 1 |
| 3 | Shower arm cup | 1 | 14 | Handle | 1 |
| 4 | 6in Shower head | 1 | 15 | Water diverter screw | 2 |
| 5 | Shower arm | 1 | 16 | Water diverter cap | 2 |
| 6 | Shower arm cover | 1 | 17 | Handle screw | 1 |
| 7 | Body jet cover | 3 | 18 | Handle cap | 1 |
| 8 | Body jet | 3 | 19 | Main body spare parts | 8 |
| 9 | Main body | 1 | 20 | Instruction manual | 1 |
| 10 | Water diversion main body 1 | 1 | 21 | Gloves | 2 |
| 11 | Water diversion main body panel | 2 | 22 | Handle wrench | 1 |
Essential dimensions & water pipe line
The installation depth of shower holder and body jet
The thickness of the tile must be calculated for installation.
Connector size of male thread: USA: 1/2″-14NPT, Canada: 1/2″-14NPT, Europe:
G1/2″
Body Jets Installation
Step 1.Wrap the threaded pipe of NPT 1/2 with Teflon tape and screw it into
the wall.
Step 2.Cut off any excess parts using a saw.
Step 3.Screw the massage body jet onto the wall.
Installation of the Hand Shower Holder
- Connect shower arm with the cover before screwing arm into riser connection to prevent damage.
- Fix shower head onto shower arm and apply tape to pipe threads on both ends.
- Do not overtighten shower head.it is 360°swivel connection
Three-Function Water Separation Shower Set Model: B
Accessories List
| No. | Part name | Qty | No. | Part name | Qty |
|---|---|---|---|---|---|
| 1 | Shower head | 1 | 13 | Water diverter | 2 |
| 2 | Shower arm | 1 | 14 | Deck plate | 1 |
| 3 | Shower arm cup | 1 | 15 | Handle | 1 |
| 4 | 6in Shower head | 1 | 16 | Water diverter screw | 2 |
| 5 | Shower arm | 1 | 17 | Water diverter cap | 2 |
| 6 | Shower arm cover | 1 | 18 | Handle screw | 1 |
| 7 | Showe hand | 1 | 19 | Handle cap | 1 |
| 8 | Hand shower holder | 1 | 20 | Main body spare parts | 8 |
| 9 | Shower hose | 1 | 21 | Instruction manual | 1 |
| 10 | Main body | 1 | 22 | Gloves | 2 |
| 11 | Water diversion main body 1 | 1 | 23 | Handle wrench | 1 |
| 12 | Water diversion main body panel | 2 |
Essential dimensions & water pipe line
The installation depth of shower holder and body jet
The thickness of the tile must be calculated for installation.
Connector size of male thread: USA: 1/2″-14NPT, Canada: 1/2″-14NPT, Europe:
G1/2″.
Installation of the Hand Shower Holder
- Connect shower arm with the cover before screwing arm into riser connection to prevent damage.
- Fix shower head onto shower arm and apply tape to pipe threads on both ends.
- Do not overtighten shower head.it is 360°swivel connection
Installation The Hand Show Holder
Step1. Screw the thread into the water pipe inside the wall
Step2. Screw the main body into the thread
Step3. Rotate and fix the body with the special-shaped wrench
Step4. Connect hand shower and the hose.
Three-Function Water Separation Shower Set Model: C
Accessories List
| No. | Part name | Qty | No. | Part name | Qty |
|---|---|---|---|---|---|
| 1 | Shower head | 1 | 12 | Water diverter | 2 |
| 2 | Shower arm | 1 | 13 | Deck plate | 1 |
| 3 | Shower arm cup | 1 | 14 | Handle | 1 |
| 4 | Body jet cover | 6 | 15 | Water diverter screw | 2 |
| 5 | Body jet | 6 | 16 | Water diverter cap | 2 |
| 6 | Showe hand | 1 | 17 | Handle screw | 1 |
| 7 | Hand shower holder | 1 | 18 | Handle cap | 1 |
| 8 | Shower hose | 1 | 19 | Main body spare parts | 8 |
| 9 | Main body | 1 | 20 | Instruction manual | 1 |
| 10 | Water diversion main body 1 | 1 | 21 | Gloves | 2 |
| 11 | Water diversion main body panel | 2 | 22 | Handle wrench | 1 |
Essential dimensions & water pipe line
The installation depth of shower holder and body jet
The thickness of the tile must be calculated for installation.
Connector size of male thread: USA: 1/2″-14NPT, Canada: 1/2″-14NPT, Europe:
G1/2″.
Installation Depth Of Main Body (Model: A&B&C)
Notice:
- The installation depth of the main body should be no less than 3 1/8″ (80mm) and no more than 327/28″ (98mm), including the thickness of the tile. Otherwise, the deck plate cannot be installed.
- The installation depth of the dividing water handwheel should be no less than 1 31/32″ (50mm) and no more than 3 3/4″ (95mm), including the thickness of the tile. Otherwise the deck plate cannot be installed.
- The opening size of ceramic tile shall be smaller than the deck plate size.
Piping Instructions Before Tiling(Model: A&B&C)
- As shown in the figure, the inlet and outlet pipes are pre-buried Pleas epayattention to the correct direction of installing the pre-buried main body.
- Install the hot and cold water inlet pipes and three mixed water outlet pipes connected to shower head, hand shower holder ‘and body jet pipes seperately.
- Before tiling, turn on the water to test whether the left and right inlet pipes are tightly connected without leakage. Then, adjust the flow switch to be on to check the mixed outlet pipes for leak ges.
- The handwheel can be installed according to the customer preference. and the DIY arrangement shape.
Main Body Valve Installation(Model: A&B&C)
- Make marks according to the size of the main body valve, and then drill anchors into the wall (concrete wall).
- Lock the main body to wood directly with screws (wood wall).
- When installing the main body, please mark the UP side up and do not install it upside down.
Please note that the level meter should be parallel to the wall; otherwise, the deck plate cannot be installed
Do not remove the white wear ring; otherwise, the handwheel will be damaged.
Water flow control: clockwise Turn-down and stop anti-clockwise Turn-up to max
Precautions for Handwheel Installation
※1.The line can’t be misplaced; it should be kept in line. Otherwise, the
water temperature of 100°F or 38°C will not be correct.
※2. Please ensure that the plastic locating ring (A) and hand wheal locating pin (B) are kept in the same line with 100°F or 38°C. Otherwise. the water temperature will be incorrect.
- Please install the deck plate, water diverters, and water diverter rods step by step.
- Install the handle with the screw and handle cap.
Body Jets Installation
Step 1. Wrap the threaded pipe of NPT1/2 with Teflon tape and screw it into
the wall.
Step 2. Cut off any excess parts using a saw.
Step 3. Screw the massage body jet onto the wall.
Installation of the Hand Shower Holder
- Connect shower arm with the cover before screwing arm into riser connection to prevent damage.
- Fix shower head onto shower arm and apply tape to pipe threads on both ends.
- Do not overtighten shower head.it is 360°swivel connection
Installation The Hand Show Holder
Step1. Screw the thread into the water pipe inside the wall
Step2. Screw the main body into the thread.
Step3. Rotate and fix the body with the special-shaped wrench
Step4. Connect hand shower and the hose.
Do’s
- In order to keep the mixer surface bright, please clean the mixer regularly.
- Rinse the faucet with clean water and wipe it with a soft cotton cloth.
- Use one of the following cleaners to remove dirt from the surface:
a. Mild liquid cleaner.
b. Colorless glass cleaner and powder cleaner that do not cause abrasion and can be dissolved completely.
c. Polish liquid that does not cause abrasion.
Don’ts
a. Avoid using cleaning powder, harsh cleaning chemicals, brushes and coarse
cloth to prevent scratching and friction.
b. Do not use acid cleaners to clean the faucet as they may cause surface
corrosion of the faucet. If the faucet is exposed to harmful acid substances,
please rinse it immediately with water.