Black Decker BDXBWBO2 Bottle Warmer Instruction Manual
- June 13, 2024
- Black Decker
Table of Contents
- Black Decker BDXBWBO2 Bottle Warmer
- Definitions: Safety Alert Symbols and Words
- IMPORTANT SAFETY INSTRUCTIONS
- COMPLIANCE
- CUSTOMER ASSISTANCE
- Getting to know your Bottle Warmer
- PRODUCT VIEW
- OPERATING INSTRUCTIONS
- SETUP AND USE
- CLEANING & MAINTENANCE
- DESCALING
- TROUBLESHOOTING
- WARRANTY & TRADEMARK ACKNOWLEDGMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Black Decker BDXBWBO2 Bottle Warmer
Before operating the appliance, please read all safety and operating instructions. Save all instructions in a safe place for future reference.
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to
alert you to hazardous situations and your risk of personal injury or property
damage.
DANGER: Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not
avoided, may result in property damage.
WARNING: Read all safety warnings and all instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/ or
serious injury.
WARNING: To reduce the risk of injury, read the instruction manual.
PROP 65 WARNING :
This product can expose you to chemicals including Di(2-ethylhexyl)phthalate
(DEHP), which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliances, basic precautions should always be
followed, including the following:
A WARNING: To reduce the risk of fire, electrical shock or injury:
- Shock Hazard. To protect against risk of electrical shock, do not put the base, the electrical cord or the electrical plug in water or other liquid.
- Use only as described in this manual. Use only manufacturer’s recommended attachments. Never modify the product or any part of it. Damage or personal injury could result.
- Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord. Keep cord away from heated surfaces.
- Do not operate outdoors.
- This appliance is intended for household use only and not for commercial or industrial use.
- Plug the plug directly into an electrical outlet.
- Do not handle plug with wet hands.
- Use the plug only in a standard electrical outlet (720V/60Hz).
- Do not leave appliance when plugged in.
- Turn off the switch before unplugging.
- Turn off the appliance if you need to remove.
- Don’t burn yourself when removing the bottles.
- Close supervision is necessary when any appliance is used by or near children.
- The heating element surface is subject to residual heat after use. Do not put any flammable or explosive articles around the appliance in order to avoid danger.
- Place the appliance on a still and stable surface while in use.
- Pull the plug out of the socket when not in use, avoid touching the water.
- The appliance becomes extremely hot during fast heat and warming and may cause burns if it is touched.
- Beware of hot steam that comes out during heating.
- Do not touch the appliance after heating.
- Never move or touch the appliance when it is in use or when water is still hot.
- Never place items on top of the appliance when in use.
- Only use water without any additives.
- Do not put bleach or other chemicals in the appliance.
- Always let the appliance cool down before moving or storing it.
- Never place items directly on the heating element especially when the appliance is switched on. Always pour any remaining water out of the appliance after use and when the appliance has cooled down.
- Not for space heating purposes.
- Do not store or use the product in locations where the temperature may reach or exceed 86°F (30°C) (such as outside sheds or metal buildings in summer). Please store the product in a cool and dry location.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- If the SUPPLY CORD is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- The device should be used only for heating children’s food.
- Improper use may damage the warmer and cause burns to the user.
- Do not use the product contrary to its intended use. Other uses violate the terms of the warranty. NEVER turn on the device when there is no water in it.
- Before switching on the warmer, make sure that the correct amount of water specified in the instructions has been added to its container. The warmer should be emptied of any residual water before each subsequent use.
- The attached measuring cup should not be used to measure food.
- DO NOT place any oil or flammable liquids in the container as it may cause a fire.
- During operation, there is hot water in the warmer and/or hot vapour will escape from it. Be ve,y careful as it can cause severe burns. Avoid contact with the skin. Keep your face and hands at a safe distance and do not place them above the device while it is in use.
- Do not move or lift the warmer while it’s turned on, or when it is filled with hot water.
- DO NOT touch the body of the device when it is turned on.
- The surface of the device may become hot during operation, and some areas may remain hot after it is finished.
- Misuse of appliance may cause injury.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
- Before serving, unplug cord from wall outlet and dish. Do not leave cord within child’s reach.
- Children being supervised not to play with the appliance.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions, or has been damaged in any manner. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to “off”. then remove plug from wall outlet.
- Do not touch hot surfaces. Use handles or knobs.
- A short power-supply cord (or detachable power-supply cord) is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
- To ensure continued protection against risk of electric shock, connect to properly grounded outlets only.
WARNING:
- Prevent unintentional starting. Ensure the power is off before picking up or carrying the appliance. Carrying the appliance with your finger on power button invites accidents.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Do not store or use the appliance near high temperature areas and keep away from direct sunlight.
- Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock or electrocution.
- An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety. The smaller the gauge number of the wire, the greater the capacity of the cable, that is, 76 gauge has more capacity than 78 gauge. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. When using more than one extension to make up the total length, be sure each individual extension contains at least the minimum wire size. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord.
Volts| Total Length of Cord in Feet (meters)
---|---
120V| 25 (7.6)| 50 (15.2) 100 (30.5)| 150 (45.7)
Ampere Rating| American Wire Gauge
More Than| Not More Than
0| 6| 18| 16| 16| 14
6| 10| 18| 16| 14| 12
10| 12| 16| 16| 14| 12
12| 16| 14| 12| Not Recommended - Do not place any object on top of the product or place the product on a soft surface that might block the ventilation slots and result in excessive internal heat. Place the product in a position away from any heat source. The product is ventilated through slots at the bottom.
- Do not operate the product if it has received a sharp blow, been dropped or otherwise damaged in any way. Take it to an authorized service center.
- Do not disassemble the product; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.
- Disconnect the plug from the outlet before attempting any cleaning. This will reduce the risk of electric shock.
COMPLIANCE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
CUSTOMER ASSISTANCE
Product Service & Support
For any questions about operating this new BLACK+DECKER branded product,
PLEASE CONTACT US FIRST … do not return this product to the retail store. The
contact information for support will vary depending on the country in which
you purchased and utilize the product.
To obtain warranty service or other information for products purchased from CT
Nova itself or through its authorized reseller or agent and utilized in the
U.S.A., please visit www.ctnovatech.com. You will receive instructions on how
to ship the products at your expense to an our Authorized Service Center. To
obtain service, you must include: (a) a copy of your receipt, bill of sale or
other comparable proof of purchase; (b) a written description of the problem;
and, most importantly; (c) your address and telephone number.
For further information needed on its features, please visit
www.blackanddecker.com for frequently asked
questions and the electronic manual.
©2022 CT Nova US LLC
4700 Duke Drive Suite 200, Mason, OH 45040, USA
Getting to know your Bottle Warmer
- Product Rating: AC120V- 60Hz 300W
- Design Features:
- Fast heat
- Thermostat temperature safety to keep milk and baby food warm
PRODUCT VIEW
- Milk bottle basket
- Adapter ring
- Basket
- Heating chamber
- LED panel
MAJOR COMPONENTS AND ATTACHMENTS
OPERATING INSTRUCTIONS
WARNING:
- Wipe the heating chamber of the warmer and the body with a damp cloth, and dry with a towel. Wash the adapter ring and the bottle/jar basket in warm water, using a mild detergent, and rinse with warm water.
- Turn off and unplug appliance before cleaning. To avoid scaling, always use pre-boiled/demineralised water on heating plate for operation. When cleaning, as well as after every use, clean the heating plate and wipe dry with a soft damp cloth.
- Do not alter the plug in any way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet.
- Never turn on the warmer when there is no water in it.
- Hot vapor is emitted while the warmer is operating. Be very careful as it can cause severe burns. Avoid contact with the skin. Keep your face and hands at a safe distance and do not place them above the device while it is in use. To avoid the possibility of burns, never move or carry the warmer while it is working.
- For the safety of your child, always check the temperature of the food before feeding. Be sure food is at safe temperature. Place a small amount of food on the inner part of your wrist as the skin is delicate and sensitive at this spot.
- For microbiological and hygiene reasons, milk or food that has already been heated and cooled down should not be reheated. If it has not been used, it should be disposed of.
- The food should not be heated for too long a period.
SETUP AND USE
WARNING:
- Place appliance indoors on a flat surface in a secure spot that will not be knocked or moved and out of reach of children during operation.
- Rapid heating of food frozen in glass bottles and jars directly taken out from fridge is NOT recommended.
-
Add the appropriate amount of water into the heating chamber, according to the volume suggested in the table to follow.
NOTE: There are many factors that have an influence on heating time and temperature of the food after heating. The main ones are: current temperature of the food, its volume, type and type of material of the container (glass, plastic) in which the food is heated, and the amount of water used for heating. The indicated amounts of water are approximate. Due to the above factors, it is not possible to give the exact amount of water needed for heating. Optimal amounts of water can be easily determined experimentally. Add less water if the food is too hot. Add more water if the food is too cold. -
Place the bottle/jar basket in the heating chamber.
-
Put an adapter ring onto the warmer’s body to limit the amount of escaping vapour.
-
Place the bottle prepared for feeding or an open container/jar in the basket. Place the bottle/container/jar in the middle of warmer to ensure even heating.
NOTE: Make sure that the bottle/container you choose is suitable for boiling according to the manufacturer’s instructions. -
Plug the power cord into the power socket and you will hear a beep sound. It is now powered on and ready to operate in one of the heating or warming modes that follow.
NOTE: To stop any cycle, press the 6 button to turn off the warmer, and then disconnect it from the power socket.
Fast Heating
WARNING: Always use a cloth when removing bottles, containers or jars from the warmer to avoid burns. Do not touch the body of the heating chamber.
- Add about 0.3-0.802 of water to the empty heating chamber.
- Press the button “000” will display on the screen.
- Press the button and select
- The warmer switches off automatically after operating the fast heating mode for 8 minutes or when the water in the heating chamber dries out, signalling the end of the cycle with a “Beep-Beep-Beep” sound.
- Shake the bottle well to get an evenly warmed milk and baby food. Stir food heated in an open container or jar with a spoon to ensure an even temperature distribution.
Target temperature: 99° F / 37° C (reference only)
NOTE: The time to warm milk / food depends on the volume, initial
temperature, milk bottle / food jar material, and environmental temperature
.
Milk Bottle Warming
- Add about 6.5oz of water to the empty heating chamber.
- Press the button and select
- The temperature is pre-set to 99° F (37° C). Press Aorv button to set the temperature, 95° F – 105° F (35° C – 41° C).
- After 3 hours, the warmer will automatically end the cycle, signalling it with a
“Beep-Beep-Beep”sound.
Food Defrosting
-
Add about 6.5oz of water to the empty heating chamber.
-
Press the button and select –
-
Press A or v button and set the temperature 95° F (35° C).
-
After 3 hours, the warmer will automatically end the cycle, signalling it with a “Beep-Beep-Beep” sound.
NOTE:- As in the case of heating food in a bottle/container, the defrosting time depends on the same factors (refer to NOTE on P.6) and its exact determination is not possible.
- NEVER refreeze previously defrosted milk.
- Dispose of any milk that has not been used.
Food Warming
- Add about 6.5oz of water to the-empty heating chamber.
- Press the button and select
- The temperature is pre-set to 165° F (7 4 ° C). Press A or v button to set the temperature, 125° F – 180° F (52° C – 82° C).
- After 3 hours, the warmer will automatically end the cycle, signalling it with a “Beep-Beep-Beep” sound.
CLEANING & MAINTENANCE
WARNING:
- Always unplug the appliance before cleaning.
- Do Not clean the base by tap water or immerse base in water.
- Tap water easily produces scale on hot heating plate. Wipe the plate after each use to avoid scale build up.
- Do not use abrasives or solvents for cleaning.
- Maintenance of the warmer, other than cleaning or limescale removing, is not required.
- Do not put bottles or other objects inside the heating chamber if the warmer is not used.
- Clean the body and the inside of the warmer with a soft cloth or sponge, then dry it with a clean cloth or a paper towel.
- Do not place the appliance in the dishwasher.
DESCALING
WARNING:
- The limescale should be removed regularly to ensure proper operation of the warmer. The heating and steaming time will be prolonged if limescale piles up on the heating chamber.
- Never turn the warmer on while removing limescale.
- Failure to follow the descaling instructions can cause irreparable damage to the product.
- The presence of limescale on the heating chamber is not subject to the warranty.
Add 3.4oz of warm water and 1.6oz of vinegar to the heating chamber and left inside the warmer for not more than 30 minutes. Any longer time may cause damage to the device. When the limescale dissolves, pour out the solution and rinse the heating chamber with clean water.
TROUBLESHOOTING
Review this table to find do-it-yourself solutions for minor performance
problems. Any other service needed should be performed by qualified service
agent.
WARNING: Always turn off and unplug appliance before performing
maintenance to the appliance. Failure to do so could result in electrical
shock or personal injury.
WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by a CT Nova factory service center or a CT
Nova authorized service center. Always use identical replacement parts
.
WARRANTY & TRADEMARK ACKNOWLEDGMENT
Three-Year Limited Warranty
CT Nova warrants to the original consumer purchaser only that this product and
the component parts thereof, will be free from defects in workmanship and
materials. CT Nova will, repair or replace, at its sole option and discretion,
this product or any defective parts. CT Nova’s liability hereunder shall be
limited to repair or replacement of the defective part or parts, and such
correction shall constitute a fulfillment of all of CT Nova’s warranties
hereunder.
This limited 3-year warranty is only valid for the original consumer purchaser
in limited jurisdictions and is not transferrable. This limited 3-year
warranty will automatically terminate if this product is sold or otherwise
transferred to another party. The product must be purchased from CT Nova or an
authorized dealer or the warranty is void. This limited 3-year warranty is
valid only for products purchased and utilized in specific jurisdictions.
Please visit our website at www.ctnovatech.com for a list of jurisdictions
wherein this 3-year limited warranty is valid.
This limited 3-year warranty does not apply to accessories and consumables and
does not cover damage due to misuse, abuse, negligence, acts of God, accident,
commercial use or modification of, or to any part of this product. This
warranty does not cover damage due to improper operation, maintenance or
installation; ordinary wear and tear; or attempted alterations or repairs by
anyone other than CT Nova or someone authorized by CT Nova to do warranty
work. Any unauthorized alterations or repairs will void this warranty. This
limited 3-year warranty does not cover product sold AS IS or WITH ALL FAULTS.
This limited 3-year warranty is invalid if the factory applied serial number
or date stamp has been altered, defaced or removed from this product. This
limited 3-year warranty does not cover product purchased or utilized in a
jurisdiction not covered.
The procedure for obtaining service and support, and the applicability of this
warranty, will vary depending on the country or jurisdiction in which you
purchase and utilize the product. For details onobtaining product service,
support and other warranty information please visit
www.ctnovatech.com. This warranty gives you
specific legal rights, and you may also have other rights which vary from
state to state and country to country.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, CT NOVA MAKES NO OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. CT NOVA EXPRESSLY
DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED
WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS
EXPRESSED WARRANTY.
LIMITATION OF REMEDIES AND DAMAGES. REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. CT NOVA SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED
TO ATTORNEYS’ FEES AND/OR COSTS OF LITIGATION, FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. CT NOVA IS NOT LIABLE FOR ANY DAMAGES CAUSED
BY THE PRODUCT OR BY THE PRODUCT TO PERFORM, INCLUDING ANY LOST PROFITS, LOST
SAVINGS, INCIDENTAL DAMAGES, OR CONSEQUENTIAL DAMAGES. CT NOVA IS NOT LIABLE
FOR ANY CLAIM MADE BY A THIRD PARTY OR MADE BY YOU FOR A THIRD PARTY. THIS
LIMITATION APPLIES WHETHER DAMAGES ARE SOUGHT, OR A CLAIM MADE, UNDER THIS
WARRANTY OR AS A TORT CLAIM (INCLUDING NEGLIGENCE OR STRICT PRODUCT
LIABILITY), A CONTRACT CLAIM,OR ANY OTHER CLAIM. THIS LIMITATION CANNOT BE
WAIVED OR AMENDED BY ANY PERSON. THIS LIMITATION OF LIABILITY WILL BE
EFFECTIVE EVEN IF CT NOVA OR AN AUTHORIZED REPRESENTATIVE OF CT NOVA HAS BEEN
ADVISED BY YOU OF THE POSSIBILITY OF ANY SUCH DAMAGES.
THIS LIMITATION OF LIABILITY WILL BE EFFECTIVE EVEN IF CT NOVA OR AN
AUTHORIZED REPRESENTATIVE OF CT NOVA HAS BEEN ADVISED BY YOU OF THE
POSSIBILITY OF ANY SUCH DAMAGES.
Some states and countries do not allow limitations on how long an implied
warranty lasts and do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This
warranty gives you specific legal rights, and you may also have other rights
which vary from state to state and country to country.
Provided that the product was purchased from CT Nova itself or through its
authorized reseller or agent and utilized in the U.S.A., CT Nova will, without
charge, repair or replace, at its option, defective products, products or
component parts upon delivery to the authorized CT Nova Authorized Service
Center, accompanied by proof of the date of first customer purchase, such as a
duplicated copy of a sales receipt.
Provided that the product was purchased from CT Nova itself or through its
authorized reseller or agent and utilized in the U.S.A., CT Nova will, without
charge, repair or replace, at its option, defective products, products or
component parts upon delivery to the authorized CT Nova Authorized Service
Center, accompanied by proof of the date of first customer purchase, such as a
duplicated copy of a sales receipt.
You must rays no in til this in reus, wine i the rouse of ma pantse sin, but
the
For Products Purchased Outside the U.S.A.
Please contact your authorized local reseller or agent for warranty
information.
Trademark Acknowledgment
BLACK+DECKER® and the BLACK+DECKER Logo are trademarks of the BLACK+DECKER
Industrial Tool
Co., or an affiliate thereof and are used under license.
The color scheme is a trademark for BLACK+DECKER power tools & accessories.
© 2022 BLACK+DECKER
U.S. & Canada Only
Made in CHINA
Product Distributed by:
CT Nova US LLC
4700 Duke Drive Suite 200, Mason, OH 45040, USA
For product, service or warranty information contact us
at:www.blackanddecker.com
1-855-207-3922.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>