autoscript FC-IP Foot Controller User Guide
- June 13, 2024
- Autoscript
Table of Contents
User Guide
Foot Controller FC-IP
FC-IP Foot Controller
Part No.
A9009-0003
www.autoscript.tv
Copyright © 2018
All rights reserved.
Original Instructions:
All rights reserved throughout the world. No part of this publication may be
stored in a retrieval system, transmitted, copied or reproduced in any way,
including, but not limited to, photocopy, photograph, magnetic or other record
without the prior agreement and permission in writing of the Dedendum Plc.
Disclaimer
The information contained in this publication is believed to be correct at the
time of printing. Dedendum Production Solutions Ltd reserves the right to make
changes to the information or specifications without obligation to notify any
person of such revision or changes. Changes will be incorporated in new
versions of the publication.
We are making every effort to ensure that our publications are updated on a
regular basis to reflect changes to product specifications and features.
Should this publication not contain information on the core functionality of
your product, please let us know. You may be able to access the latest
revision of this publication from our website.
Dedendum Production Solutions Ltd reserves the right to make changes to
product design and functionality without notification.
Trademarks
All product trademarks and registered trademarks are the property of The
Dedendum Plc.
All other trademarks and registered trademarks are the property of their
respective companies.
Published by:
Dedendum Production Solutions Ltd
Email:
technical.publications@videndum.com
Safety
Important information on the safe installation and operation of this product.
Read this information before operating the product. For your personal safety,
read these instructions. Do not operate the product if you do not understand
how to use it safely. Save these instructions for future reference.
Warning Symbols Used in these Instructions
Safety cautions are included in these instructions. These safety instructions
must be followed to avoid possible personal injury and avoid possible damage
to the product.
WARNING! Where there is a risk of personal injury or injury to others,
comments appear supported by the warning triangle symbol. Where there is a
risk of damage to the product, associated equipment, process or surroundings,
comments appear supported by the word ‘CAUTION’.
Electrical Connection
WARNING! Always disconnect and isolate the product from the power supply
before attempting any servicing or removing the covers.
CAUTION! The products must be connected to a power supply of the same
voltage (V) and current (A) as indicated on the product. Refer to the
technical specifications for the products
** Use with IEEE 802.3af compatible PoE supply
Mounting and Installation
WARNING! Always ensure that all cables are routed so that they do not
present any danger to personnel. Take care when routing cables in areas where
robotic equipment is in use.
****Water, Moisture and Dust
WARNING! Protect the product from water, moisture and dust. The presence
of electricity near water can be dangerous.
WARNING! When using this product outside, protect from rain using a
suitable waterproof cover.
Operating Environment
CAUTION! The product should not be used outside the operating temperature
limits. Refer to the product technical specifications for the operating limits
for the product.
Maintenance
WARNING!** Servicing or repair of this product must only be performed by
qualified and trained engineers.
Components and Connections
Top View
- Foot Control
- Status LED
- Pedal
- Button
Front View
-
RJ45. Powered over Ethernet
Requires 3rd party IEEE 802.3af compatible
PoE supply or XBox-IP (not included) -
Data LED
-
Link LED
-
Factory Reset
Box Contents
- FC-IP Foot Controller
- Quick Start Guide
Installation
Powering Up
The controller is automatically powered up when the PoE Ethernet cable Cat5 or
Cat6 cable is attached.
Requires 3rd party IEEE 802.3af compatible PoE injector or XBox-IP (A9009-0001
not included)
Status LED
| Status LED and programmable function buttons flash once: Powered on.
---|---
| Flashing Blue light: Connected to the network but not the application.
| Solid Blue light: Connected to the network and the application.
| Solid Red light: Connected to the network, the application and in use.
Press the pedal down to start the scroll, the further it is pressed down the
faster the scroll will operate. Sensitivity and dead-band range of the Foot
Control can be adjusted in the Device Configuration in WP-IP
NB. The pedal can act as a function button. A single quick push of the pedal
through its whole range and back will activate the assigned function. As a
default the assigned function is the “Toggle Direction” function.
Maintenance
Routine Maintenance
The FC-IP Foot Controller requires minimal routine maintenance, apart from
checking the connections and overall operation periodically.
Routine checks
During use, check the following:
- Check PoE Ethernet cable for signs of wear or damage. Replace as necessary.
- Check the PoE Ethernet cable is connected properly.
- Check the Buttons and scroll wheel all move freely.
Cleaning
During normal use the only cleaning required should be a regular wipe over
with a dry, lint-free cloth. Dirt accumulated during storage or periods of
disuse may be removed with a vacuum cleaner. Particular attention should be
paid to the connection port.
WARNING! Disconnect and isolate the product from the power supply before
cleaning.
Technical Specification
Physical Data
FC-IP
Width| 195 mm (7.6 in)
Length| 232 mm (9.13 in)
Height*| 63 mm (2.4 in)
Weight| 950 g (2.1 lb)
Programmable Function Buttons x 2
- 1 x Pedal
- 1 x Button
Connector
- 1 x RJ45
Power
- 3 W Max.
- Powered over Ethernet (PoE)
- Third party PoE Injector Required (IEEE 802.3af compatible PoE supply) or Xbox-IP (not included)
Status LED’s
- Connection
- Data
- Link
- Status
Environmental Data
- Operating temperature range +5°C to +40°C (+41°F to +104°F)
- Storage temperature range -20°C to +60°C (-4°F to +140°F)
| Fault | Check |
|---|---|
| The FC-IP is not powering up | Check that the power over Ethernet source has a |
suitable power injector
Check that the cable from the PoE source is firmly locked into the PoE input
on the FC-IP
Check that a quality Cat5 or Cat6 cable has been used to connect to the PoE
injector
The FC-IP is powered up, but not controlling the prompted text| Check that any
connections to controllers are correct and secured
Confirm that the FC-IP is enabled in the Devices window
Check that a quality Cat5 or Cat6 cable has been used to connect the
controller to the PoE injector
The FC-IP has locked and is not responsive| Power cycle the FC-IP by removing
the PoE Injector connection
The FC-IP is not discovered on a local IP network| Check that the FC-IP and
the software application are not separated by an IP gateway
Check that the device is not already connected to another different network
If added to the system manually check the correct details are entered in the
Manually Add Device fields
The FC-IP IP address is not configurable correctly from the application| Check
that the correct IP address has been added for the FC-IP. (i.e. has this IP
address been used for a different device)
General Notices
FCC Certification
FCC Warning
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Declaration of Conformity
This product complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This product may not cause harmful interference.
- This product must accept any interference received, including interference that may cause undesired operations.
Declaration of Conformity
Dedendum Production Solutions Limited declares that this product has been
manufactured in accordance with BS EN ISO 9001:2008.
This product complies with the following EU Directives:
- EMC Directive 2014/30/EU
Compliance with these directives implies conformity to applicable Harmonised European standards (European Norms) which are listed on the EU Declaration of Conformity for this product or product family. A copy of the Declaration of Conformity is available upon request.
Environmental considerations
** European Union Waste of Electrical and Electronic Equipment (WEEE)
Directive (2012/19/EU)
This symbol marked on the product or its packaging indicates that this product
must not be disposed of with general household waste. In some countries or
European Community regions separate collection systems have been set up to
handle the recycling of electrical and electronic waste products. By ensuring
this product is disposed of correctly, you will help prevent potentially
negative consequences for the environment and human health. The recycling of
materials helps conserve natural resources.
Visit our website for information on how to safely dispose of this product and
its packaging.
In countries outside the EU:**
Dispose of this product at a collection point for the recycling of electrical
and electronic equipment according to your local government regulations.
Publication No. A9009-4985/3www.autoscript.tv
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>